Engine-Codes.com
Engine-Codes – Chevrolet – P0332 2018 Chevrolet Silverado

P0332 2018 Chevrolet Silverado Code - Knock Sensor Circuit Low Voltage Bank 2

Quick Answer

The P0332 diagnostic trouble code (DTC) for a 2018 Chevrolet Silverado indicates a problem with the Knock Sensor Circuit Low Voltage Bank 2. Common causes include Faulty knock sensor in Bank 2, Wiring issues or damaged wiring harness connected to the knock sensor, Poor electrical connection or corrosion in the sensor circuit. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0332 2018 Chevrolet Silverado indicates Knock Sensor Circuit Low Voltage Bank 2.
Common causes
Common causes include Faulty knock sensor in Bank 2, Wiring issues or damaged wiring harness connected to the knock sensor, Poor electrical connection or corrosion in the sensor circuit.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0332 2018 Chevrolet Silverado Description

The P0332 diagnostic trouble code (DTC) for a 2018 Chevrolet Silverado indicates a problem with the Knock Sensor Circuit Low Voltage Bank 2. The knock sensor is a crucial component in the engine management system that detects abnormal combustion, known as engine knock or detonation. When the knock sensor detects these irregularities, it sends a signal to the engine control module (ECM) to adjust the ignition timing and prevent engine damage.

OBDII Code P0332 2018 Chevrolet Silverado - Knock Sensor Circuit Low Voltage Bank 2
P0332 2018 Chevrolet Silverado Code - Knock Sensor Circuit Low Voltage Bank 2

Common Causes of P0332 2018 Chevrolet Silverado

  1. Faulty knock sensor in Bank 2
  2. Wiring issues or damaged wiring harness connected to the knock sensor
  3. Poor electrical connection or corrosion in the sensor circuit
  4. Engine overheating leading to sensor malfunction
  5. ECM software or hardware issues affecting sensor readings

Symptoms of P0332 2018 Chevrolet Silverado

  1. Check engine light illuminated on the dashboard
  2. Reduced engine performance or power
  3. Engine misfires or rough idling
  4. Decreased fuel efficiency
  5. Engine knocking or pinging noises

How to Fix P0332 2018 Chevrolet Silverado

  1. Begin by diagnosing the specific cause of the low voltage reading in Bank 2 using a scan tool to retrieve the trouble codes and data from the ECM.
  2. Inspect the knock sensor in Bank 2 and the surrounding wiring harness for any signs of damage, corrosion, or loose connections. Replace the knock sensor if necessary.
  3. Test the sensor circuit for proper voltage and continuity to ensure it is functioning correctly.
  4. Clear the DTC from the ECM memory using the scan tool and perform a test drive to verify that the issue has been resolved.
  5. If the problem persists, further diagnostics may be required to identify any underlying issues with the ECM or other related components.

Cost to Fix P0332 2018 Chevrolet Silverado

The typical repair costs for addressing a P0332 code on a 2018 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, replacing a faulty knock sensor and addressing any wiring issues may cost between $200 and $500, including parts and labor. However, it's important to note that labor rates at auto repair shops can vary significantly based on location, with hourly rates typically ranging from $80 to $150. Additional diagnostic time may also be necessary to pinpoint the exact cause of the problem, so it's advisable to consult with a qualified mechanic for a more accurate cost estimate.

What does this mean?

Tech Notes for P0332 2018 Chevrolet Silverado

The P0332 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause engine performance problems. Replacing the knock sensor usually takes care of the problem.

Need more information about the P0332 2018 Chevrolet Silverado code?

Need more information on how to fix the P0332 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0332 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0332 2018 Chevrolet Silverado Code

1. What does the OBDII code P0332 mean on a 2018 Chevrolet Silverado?

P0332 indicates a low voltage signal from the knock sensor on Bank 2, which monitors engine vibrations to detect knocking or detonation.

2. What are the common symptoms of code P0332 in a 2018 Chevrolet Silverado?

Symptoms may include poor engine performance, reduced fuel efficiency, illuminated check engine light, and engine knocking noises.

3. What causes the P0332 code to appear on a 2018 Chevy Silverado?

Common causes include a faulty knock sensor, damaged sensor wiring, poor electrical connections, or a malfunctioning ECM.

4. Can I drive my 2018 Chevrolet Silverado with a P0332 code?

While it may be possible to drive, prolonged operation can lead to engine damage due to undetected knocking. It’s best to address the issue promptly.

5. How do I fix the P0332 code on a 2018 Chevy Silverado?

Repairs may include replacing the knock sensor, repairing damaged wiring, cleaning corroded connectors, or updating/reprogramming the ECM.

6. Where is the knock sensor located in a 2018 Chevrolet Silverado?

The knock sensors are typically located under the intake manifold on the engine block. Bank 2 is on the side opposite the cylinder #1.

7. How much does it cost to repair a P0332 code on a 2018 Silverado?

Repair costs can vary, but replacing a knock sensor typically ranges from $150 to $400, including parts and labor.

8. Can a bad knock sensor cause engine damage in my 2018 Silverado?

Yes, because it may fail to detect engine knocking, which can cause severe damage if left unaddressed.

9. How can I prevent the P0332 code from recurring?

Regular maintenance, ensuring proper torque on the sensor, and avoiding exposure to moisture or contaminants can help prevent recurrence.

10. Will clearing the P0332 code fix the problem on my 2018 Chevrolet Silverado?

Clearing the code will turn off the check engine light temporarily, but the issue will return unless the underlying problem is resolved.

Discuss the causes and fixes for P0332 2018 Chevrolet Silverado OBDII Code

Submit a New Comment

Code P0332 2018 Chevrolet Silverado comments

No comments found for this page.