P0332 2014 GMC Sierra Code - Knock Sensor Circuit Low Voltage Bank 2
Quick Answer
The P0332 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the Knock Sensor Circuit Low Voltage Bank 2. Common causes include Faulty knock sensor, Damaged wiring or connectors, Corrosion or contamination in the sensor or wiring. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0332 2014 GMC Sierra indicates Knock Sensor Circuit Low Voltage Bank 2.
- Common causes
- Common causes include Faulty knock sensor, Damaged wiring or connectors, Corrosion or contamination in the sensor or wiring.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0332 2014 GMC Sierra Description
The P0332 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the Knock Sensor Circuit Low Voltage Bank 2. The knock sensor is a vital component in the engine management system that detects abnormal combustion, often referred to as engine knock or detonation. When the knock sensor detects these abnormal vibrations, it sends a signal to the engine control module (ECM) to adjust the ignition timing to prevent engine damage.
Common Causes of P0332 2014 GMC Sierra
- Faulty knock sensor
- Damaged wiring or connectors
- Corrosion or contamination in the sensor or wiring
- Issues with the ECM
- Engine overheating or pre-ignition
Symptoms of P0332 2014 GMC Sierra
- Engine knocking or pinging noises
- Decreased engine performance or power
- Poor fuel efficiency
- Illumination of the check engine light
- Rough idling or stalling
How to Fix P0332 2014 GMC Sierra
- Diagnose the issue by using a scan tool to read the DTC and check the knock sensor's voltage readings.
- Inspect the knock sensor, wiring, and connectors for any damage or corrosion.
- Replace the knock sensor if it is found to be faulty or damaged.
- Repair or replace any damaged wiring or connectors.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0332 2014 GMC Sierra
The cost of repairing a P0332 code for a 2014 GMC Sierra can vary depending on the specific cause of the issue. Typically, the cost of a new knock sensor ranges from $50 to $150, while labor costs can range from $100 to $200. Overall, the total repair cost for this issue could range from $150 to $350. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
Tech Notes for P0332 2014 GMC Sierra
Need more information about the P0332 2014 GMC Sierra code?
Need more information on how to fix the P0332 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0332 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0332 2014 GMC Sierra Code
1. What does the OBDII code P0332 mean on a 2014 GMC Sierra?
P0332 indicates a "Knock Sensor Circuit Low Voltage Bank 2," meaning the knock sensor on Bank 2 is detecting lower voltage than expected, which could affect engine performance.
2. What are the common symptoms of code P0332 in a 2014 GMC Sierra?
Symptoms may include poor engine performance, reduced fuel efficiency, engine knocking or pinging, and the check engine light being illuminated.
3. What causes the P0332 code on a 2014 GMC Sierra?
Potential causes include a faulty knock sensor, damaged sensor wiring, poor electrical connections, or issues with the engine control module (ECM).
4. How do I know which side is Bank 2 on my 2014 GMC Sierra?
Bank 2 refers to the side of the engine opposite Bank 1. On a 2014 GMC Sierra with a V8 engine, Bank 2 is typically the side with cylinder 2.
5. Can I drive my 2014 GMC Sierra with the P0332 code?
While the truck may still be drivable, ignoring the code can lead to engine damage from prolonged knocking or pinging. It's best to address the issue promptly.
6. How is the P0332 code diagnosed on a 2014 GMC Sierra?
A technician will use a scan tool to confirm the code, inspect the knock sensor and its wiring, check for corrosion or damage, and test the sensor's output voltage.
7. How do you fix code P0332 on a 2014 GMC Sierra?
Common fixes include replacing the faulty knock sensor, repairing or replacing damaged wiring, cleaning corroded connections, or reprogramming/updating the ECM if needed.
8. What is the cost to repair a P0332 code on a 2014 GMC Sierra?
The cost varies depending on the issue. Replacing a knock sensor typically costs $150–$300, including parts and labor. Wiring repairs may add to the cost.
9. Can a bad knock sensor damage my 2014 GMC Sierra's engine?
Yes, a faulty knock sensor can fail to detect engine knock, potentially leading to pre-ignition or detonation, which can cause severe engine damage over time.
10. Will clearing the P0332 code solve the problem on my 2014 GMC Sierra?
Clearing the code will turn off the check engine light temporarily, but it won't fix the underlying issue. The code will likely return if the problem isn't resolved.
Discuss the causes and fixes for P0332 2014 GMC Sierra OBDII Code
Code P0332 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.