P0328 2020 Honda CR-V Code - Knock Sensor Circuit High Voltage
Quick Answer
The P0328 diagnostic trouble code (DTC) for the 2020 Honda CR-V specifically refers to the Knock Sensor Circuit High Voltage. Common causes include Faulty knock sensor, Wiring issues or poor electrical connections, Engine overheating. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0328 2020 Honda CR-V indicates Knock Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty knock sensor, Wiring issues or poor electrical connections, Engine overheating.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0328 2020 Honda CR-V Description
The P0328 diagnostic trouble code (DTC) for the 2020 Honda CR-V specifically refers to the Knock Sensor Circuit High Voltage. The knock sensor is a crucial component in the engine management system that detects abnormal combustion in the cylinders. When the knock sensor detects excessive vibration or knocking in the engine, it sends a signal to the engine control module (ECM) to adjust the ignition timing to prevent engine damage.
Common Causes of P0328 2020 Honda CR-V
- Faulty knock sensor
- Wiring issues or poor electrical connections
- Engine overheating
- Knock sensor circuit short to power
- Engine mechanical problems causing abnormal combustion
Symptoms of P0328 2020 Honda CR-V
- Decreased engine performance
- Reduced fuel efficiency
- Engine knocking or pinging noises
- Illumination of the check engine light
- Engine hesitations or stalling
How to Fix P0328 2020 Honda CR-V
- Begin by diagnosing the knock sensor circuit using a scan tool to determine the specific cause of the high voltage issue.
- Inspect the wiring harness and connectors for any signs of damage or corrosion. Repair or replace as necessary.
- Test the knock sensor using a multimeter to check for proper resistance and continuity. Replace the knock sensor if it fails the test.
- Clear the DTC and reset the ECM to see if the issue persists. Test drive the vehicle to ensure the problem has been resolved.
- If the problem persists, further diagnosis may be needed to identify any underlying engine issues that could be causing abnormal combustion.
Cost to Fix P0328 2020 Honda CR-V
The cost of repairing a knock sensor circuit high voltage issue on a 2020 Honda CR-V can vary depending on the exact cause of the problem. In general, the cost of a knock sensor replacement ranges from $150 to $250, including parts and labor. Additional costs may be incurred if wiring repairs or further diagnostics are required. It is recommended to consult with a trusted mechanic or dealership for a more accurate cost estimate based on your specific situation. Labor rates can vary, so it's advisable to get quotes from multiple sources before proceeding with the repair.
Need more information about the P0328 2020 Honda CR-V code?
Need more information on how to fix the P0328 2020 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0328 2020 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0328 2020 Honda CR-V Code
1. What does OBDII code P0328 mean on a 2020 Honda CR-V?
P0328 indicates a "Knock Sensor Circuit High Voltage" issue, meaning the engine control module (ECM) has detected an excessively high voltage signal from the knock sensor.
2. What are the symptoms of code P0328 on a 2020 Honda CR-V?
Common symptoms include a lit check engine light, reduced engine performance, poor fuel economy, and in some cases, engine knocking or pinging.
3. What causes the P0328 code to appear on a 2020 Honda CR-V?
Potential causes include a faulty knock sensor, damaged wiring or connectors, a short circuit, or issues with the engine control module (ECM).
4. Can I drive my 2020 Honda CR-V with the P0328 code?
While the vehicle may still be drivable, prolonged operation can lead to engine damage due to improper ignition timing. It’s best to address the issue promptly.
5. How do I diagnose the P0328 code on a 2020 Honda CR-V?
Start by inspecting the knock sensor and its wiring for damage. Use a multimeter to check voltage levels and test the sensor. A professional diagnostic tool can also help pinpoint the issue.
6. How do I fix the P0328 code on a 2020 Honda CR-V?
Repairs may involve replacing the knock sensor, repairing damaged wiring or connectors, or reprogramming/updating the ECM if necessary.
7. How much does it cost to fix code P0328 on a 2020 Honda CR-V?
The cost varies but typically ranges from $150 to $400, depending on whether the knock sensor or wiring needs replacement and labor rates in your area.
8. Will clearing the P0328 code fix the problem on a 2020 Honda CR-V?
Clearing the code without addressing the root cause will only temporarily turn off the check engine light. The issue will likely return until properly repaired.
9. Can a bad knock sensor damage my 2020 Honda CR-V engine?
Yes, if the knock sensor isn’t functioning properly, the ECM may not adjust ignition timing correctly, potentially leading to engine knocking and long-term damage.
10. Is the knock sensor covered under warranty for a 2020 Honda CR-V?
It depends on your warranty coverage and mileage. Check with your Honda dealership to see if the repair is covered under the powertrain or emissions warranty.
Discuss the causes and fixes for P0328 2020 Honda CR-V OBDII Code
Code P0328 2020 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.