Engine-CodesGMC – P0328 2018 GMC Sierra

P0328 2018 GMC Sierra Code - Knock Sensor Circuit High Voltage Bank 1

Quick Answer

The P0328 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates a problem with the Knock Sensor Circuit High Voltage Bank 1. Common causes include Faulty knock sensor in Bank 1, Wiring issues or shorts in the knock sensor circuit, Engine overheating leading to false knock sensor readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0328 2018 GMC Sierra indicates Knock Sensor Circuit High Voltage Bank 1.
Common causes
Common causes include Faulty knock sensor in Bank 1, Wiring issues or shorts in the knock sensor circuit, Engine overheating leading to false knock sensor readings.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 18, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0328 2018 GMC Sierra Description

The P0328 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates a problem with the Knock Sensor Circuit High Voltage Bank 1. The knock sensor is a crucial component of the engine management system, responsible for detecting abnormal combustion, also known as engine knock or detonation. When the knock sensor detects these abnormal vibrations, it sends a signal to the engine control module (ECM) to adjust the ignition timing to prevent engine damage.

OBDII Code P0328 2018 GMC Sierra - Knock Sensor Circuit High Voltage Bank 1
P0328 2018 GMC Sierra Code - Knock Sensor Circuit High Voltage Bank 1

Common Causes of P0328 2018 GMC Sierra

  1. Faulty knock sensor in Bank 1.
  2. Wiring issues or shorts in the knock sensor circuit.
  3. Engine overheating leading to false knock sensor readings.
  4. Engine mechanical problems causing abnormal combustion.
  5. ECM software or hardware issues.

Symptoms of P0328 2018 GMC Sierra

  1. Check engine light illuminated on the dashboard.
  2. Reduced engine performance or power.
  3. Engine pinging or knocking noises during acceleration.
  4. Decreased fuel efficiency.
  5. Engine stalling or rough idling.

How to Fix P0328 2018 GMC Sierra

  1. Begin by diagnosing the knock sensor circuit in Bank 1 using a scan tool to confirm the P0328 code.
  2. Inspect the wiring harness and connectors for any damage, corrosion, or loose connections. Repair or replace as necessary.
  3. Test the knock sensor in Bank 1 for proper operation and replace if faulty.
  4. Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
  5. If the problem persists, further diagnostics may be required to identify underlying engine issues causing false knock sensor readings.

Cost to Fix P0328 2018 GMC Sierra

The typical repair costs for addressing a P0328 code in a 2018 GMC Sierra can vary depending on the specific cause of the issue. In general, replacing a knock sensor or repairing wiring harnesses can range from $150 to $400, including parts and labor. Additional diagnostic time and potential engine repairs could increase the total cost. It is advisable to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on the specific circumstances of the vehicle. Labor rates at auto repair shops typically range from $80 to $150 per hour, but can vary based on location and shop rates.

Need more information about the P0328 2018 GMC Sierra code?

Need more information on how to fix the P0328 2018 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2018 GMC Sierra Code

No Frequently Asked Questions about P0328 2018 GMC Sierra Code found.

Discuss the causes and fixes for P0328 2018 GMC Sierra OBDII Code

Code P0328 2018 GMC Sierra comments

No comments found for this page.