P0328 2017 GMC Sierra Code - Knock Sensor Circuit High Voltage Bank 1
Quick Answer
The P0328 diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates that there is a high voltage condition detected in the knock sensor circuit for bank 1. Common causes include Faulty knock sensor, Wiring issues in the knock sensor circuit, Corrosion or poor connections in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0328 2017 GMC Sierra indicates Knock Sensor Circuit High Voltage Bank 1.
- Common causes
- Common causes include Faulty knock sensor, Wiring issues in the knock sensor circuit, Corrosion or poor connections in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0328 2017 GMC Sierra Description
The P0328 diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates that there is a high voltage condition detected in the knock sensor circuit for bank 1. The knock sensor is a crucial component in the engine management system that detects abnormal combustion, often referred to as engine knock or detonation. When the knock sensor detects these abnormal vibrations, it sends a signal to the engine control module (ECM) to adjust the ignition timing to prevent engine damage.
Common Causes of P0328 2017 GMC Sierra
- Faulty knock sensor
- Wiring issues in the knock sensor circuit
- Corrosion or poor connections in the sensor circuit
- ECM software or hardware issues
- Engine mechanical problems causing abnormal combustion
Symptoms of P0328 2017 GMC Sierra
- Engine knocking or pinging noises
- Decreased engine performance
- Reduced fuel efficiency
- Check Engine Light illuminated
- Engine misfires
How to Fix P0328 2017 GMC Sierra
- Diagnose the issue by using a scan tool to read the DTC and perform a visual inspection of the knock sensor and its wiring.
- Test the knock sensor using a multimeter to check for proper resistance and voltage output.
- Inspect the wiring harness for any damage, corrosion, or poor connections and repair as necessary.
- Replace the knock sensor if it is found to be faulty.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0328 2017 GMC Sierra
The cost of repairing a P0328 code on a 2017 GMC Sierra can vary depending on the specific cause of the issue. Typically, the cost of a knock sensor replacement can range from $100 to $300, while labor costs can range from $80 to $150 per hour. Additional costs may include diagnostic time and any necessary parts or repairs for wiring issues. It is recommended to consult with a trusted mechanic or auto repair shop for a more accurate estimate based on your location and vehicle specifics.
Need more information about the P0328 2017 GMC Sierra code?
Need more information on how to fix the P0328 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0328 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0328 2017 GMC Sierra Code
What does the OBDII code P0328 mean on a 2017 GMC Sierra?
P0328 indicates a "Knock Sensor Circuit High Voltage" issue on Bank 1, meaning the knock sensor is detecting excessively high voltage signals, which could signify a sensor or wiring problem.
What are the common symptoms of code P0328 on a 2017 GMC Sierra?
Symptoms may include the Check Engine Light turning on, reduced engine performance, poor fuel economy, and engine knocking or pinging noises.
What causes the P0328 code on a 2017 GMC Sierra?
Common causes include a faulty knock sensor, damaged sensor wiring or connectors, corrosion in the circuit, or an issue with the engine control module (ECM).
Can I drive my 2017 GMC Sierra with a P0328 code?
While the vehicle may still run, driving with this code is not recommended as it can lead to engine damage if knocking or pinging is not properly detected and addressed.
How do I diagnose the P0328 code on a 2017 GMC Sierra?
Diagnosis involves inspecting the knock sensor and wiring for damage, checking for loose connections, testing sensor voltage levels with a multimeter, and scanning for additional trouble codes.
How is the P0328 code on a 2017 GMC Sierra typically fixed?
Repairs may include replacing the knock sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming the ECM if necessary.
Where is the knock sensor located on a 2017 GMC Sierra?
The knock sensor for Bank 1 is typically located on the engine block, cylinder head, or intake manifold, near the first cylinder.
What tools are needed to fix the P0328 code on a 2017 GMC Sierra?
Tools may include a diagnostic scan tool, multimeter, socket set, and possibly a torque wrench for proper sensor installation.
Could a bad knock sensor cause long-term damage to my 2017 GMC Sierra?
Yes, if a faulty knock sensor is not addressed, it can fail to detect engine knock, potentially leading to severe engine damage over time.
Does the P0328 code always mean the knock sensor is bad?
No, the issue could also be caused by wiring problems, connector corrosion, or a malfunctioning ECM, so proper diagnosis is essential.
Discuss the causes and fixes for P0328 2017 GMC Sierra OBDII Code
Code P0328 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.