P0328 2014 GMC Sierra Code - Knock Sensor Circuit High Voltage Bank 1
Quick Answer
The P0328 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates that there is a high voltage condition detected in the knock sensor circuit for bank 1. Common causes include Faulty Knock Sensor: The knock sensor itself may be malfunctioning, leading to inaccurate readings and triggering the high voltage condition, Wiring Issues: Damaged or corroded wiring in the knock sensor circuit can cause high voltage readings, Engine Vibration: Excessive engine vibration can falsely trigger the knock sensor, leading to a high voltage condition. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0328 2014 GMC Sierra indicates Knock Sensor Circuit High Voltage Bank 1.
- Common causes
- Common causes include Faulty Knock Sensor: The knock sensor itself may be malfunctioning, leading to inaccurate readings and triggering the high voltage condition, Wiring Issues: Damaged or corroded wiring in the knock sensor circuit can cause high voltage readings, Engine Vibration: Excessive engine vibration can falsely trigger the knock sensor, leading to a high voltage condition.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0328 2014 GMC Sierra Description
The P0328 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates that there is a high voltage condition detected in the knock sensor circuit for bank 1. The knock sensor is a crucial component in the engine management system, responsible for detecting abnormal combustion, or "knocking," in the engine. When the knock sensor detects knocking, it sends a signal to the engine control module (ECM) to adjust the ignition timing to prevent engine damage.
Common Causes of P0328 2014 GMC Sierra
- Faulty Knock Sensor: The knock sensor itself may be malfunctioning, leading to inaccurate readings and triggering the high voltage condition.
- Wiring Issues: Damaged or corroded wiring in the knock sensor circuit can cause high voltage readings.
- Engine Vibration: Excessive engine vibration can falsely trigger the knock sensor, leading to a high voltage condition.
- ECM Malfunction: A malfunctioning ECM can incorrectly interpret signals from the knock sensor, resulting in the high voltage code.
Symptoms of P0328 2014 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Engine Performance: The engine may experience reduced power and acceleration due to the ECM's adjustments to ignition timing.
- Poor Fuel Economy: The vehicle may exhibit decreased fuel efficiency as a result of incorrect ignition timing.
- Engine Misfires: High voltage in the knock sensor circuit can lead to engine misfires, causing rough idling or hesitation during acceleration.
- Increased Emissions: The vehicle may fail emissions tests due to the improper combustion caused by the knock sensor circuit issue.
How to Fix P0328 2014 GMC Sierra
- Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the knock sensor circuit to identify the root cause of the high voltage condition.
- Replace Knock Sensor: If the knock sensor is found to be faulty, replace it with a new sensor to ensure accurate readings.
- Check Wiring: Inspect the wiring harness for any damage or corrosion, repairing or replacing any faulty wiring as needed.
- Address Engine Vibration: Address any underlying issues causing excessive engine vibration, such as worn engine mounts or misfiring cylinders.
- Reset ECM: Clear the DTC and reset the ECM to ensure that the high voltage condition is no longer present.
Cost to Fix P0328 2014 GMC Sierra
The cost of repairing a P0328 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. Typically, the cost of a new knock sensor ranges from $50 to $150, while the labor cost for replacement can range from $100 to $200. Additional costs may be incurred if wiring repairs or ECM diagnostics are necessary. Overall, the total repair cost for this issue can range from $150 to $500, including parts and labor. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for more accurate pricing information.
Need more information about the P0328 2014 GMC Sierra code?
Need more information on how to fix the P0328 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0328 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0328 2014 GMC Sierra Code
No Frequently Asked Questions about P0328 2014 GMC Sierra Code found.
Discuss the causes and fixes for P0328 2014 GMC Sierra OBDII Code
Code P0328 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.