Engine-Codes.com
Engine-Codes – Nissan – P0328 2013 Nissan Rogue

P0328 2013 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The P0328 diagnostic trouble code (DTC) in a 2013 Nissan Rogue indicates that there is a high input signal detected from the knock sensor in Bank 1 of the engine. Common causes include Faulty knock sensor, Wiring issues or loose connections in the knock sensor circuit, Engine mechanical problems causing abnormal vibrations. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0328 2013 Nissan Rogue indicates Knock Sensor Circuit High Input- Bank 1.
Common causes
Common causes include Faulty knock sensor, Wiring issues or loose connections in the knock sensor circuit, Engine mechanical problems causing abnormal vibrations.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0328 2013 Nissan Rogue Description

The P0328 diagnostic trouble code (DTC) in a 2013 Nissan Rogue indicates that there is a high input signal detected from the knock sensor in Bank 1 of the engine. The knock sensor is a crucial component that detects abnormal vibrations or knocking in the engine, which can be caused by detonation or pre-ignition. When the knock sensor detects these issues, it sends a signal to the engine control module (ECM) to adjust the ignition timing to prevent engine damage.

OBDII Code P0328 2013 Nissan Rogue - Knock Sensor Circuit High Input- Bank 1
P0328 2013 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Common Causes of P0328 2013 Nissan Rogue

  1. Faulty knock sensor
  2. Wiring issues or loose connections in the knock sensor circuit
  3. Engine mechanical problems causing abnormal vibrations
  4. Incorrect engine timing
  5. ECM malfunction

Symptoms of P0328 2013 Nissan Rogue

  1. Engine knocking or pinging noises
  2. Decreased engine performance or power
  3. Poor fuel efficiency
  4. Check Engine Light illuminated on the dashboard

How to Fix P0328 2013 Nissan Rogue

  1. Diagnose the issue by using a scan tool to read the DTC and inspect the knock sensor and its wiring for any visible damage or loose connections.
  2. Replace the knock sensor in Bank 1 if it is found to be faulty. Ensure the new sensor is properly installed and connected.
  3. Check and repair any damaged wiring or connections in the knock sensor circuit.
  4. Verify and adjust the engine timing if necessary to ensure proper operation.
  5. Clear the DTC and test drive the vehicle to confirm that the issue has been resolved.

Cost to Fix P0328 2013 Nissan Rogue

The cost of repairing a P0328 code in a 2013 Nissan Rogue can vary depending on the specific cause of the issue. On average, replacing a knock sensor can cost between $150 and $300, including parts and labor. However, additional costs may apply if there are wiring issues or other underlying problems that need to be addressed. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate based on the specific circumstances of the vehicle. Keep in mind that labor rates and diagnostic fees can vary based on location and the service provider.

What does this mean?

Tech Notes for P0328 2013 Nissan Rogue

The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem. If you have another code besides the knock sensor code fix the other issue first.

When is the Code Detected?

An excessively high voltage from the sensor is sent to Electronic Control Module (ECM)

Need more information about the P0328 2013 Nissan Rogue code?

Need more information on how to fix the P0328 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2013 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0328 in a 2013 Nissan Rogue?

- Common symptoms include reduced engine performance, potential engine knocking or pinging noises, and in some cases, the Check Engine light may illuminate.

2. What does the OBDII code P0328 "Knock Sensor Circuit High Input- Bank 1" mean for a 2013 Nissan Rogue?

- This code indicates that the knock sensor in Bank 1 of the engine is detecting a higher than normal voltage input, which can lead to engine performance issues.

3. What are the possible causes of OBDII code P0328 in a 2013 Nissan Rogue?

- The code P0328 can be triggered by issues such as a faulty knock sensor, wiring harness problems, poor electrical connections, or even engine mechanical issues causing abnormal vibrations.

4. How can I diagnose the OBDII code P0328 in my 2013 Nissan Rogue?

- Diagnosing this code typically involves checking the knock sensor, inspecting the wiring for any damage, testing the sensor's resistance, and verifying proper voltage levels.

5. Can I continue to drive my 2013 Nissan Rogue with OBDII code P0328?

- It is not recommended to drive your vehicle with this code as it can lead to further engine damage and reduced performance. It's best to address the issue promptly.

6. What are some repair tips for fixing OBDII code P0328 in a 2013 Nissan Rogue?

- Repair tips include replacing the knock sensor, repairing or replacing damaged wiring, ensuring proper electrical connections, and clearing the code to see if the issue persists.

7. How much does it cost to repair OBDII code P0328 in a 2013 Nissan Rogue?

- The cost of repairing this code can vary depending on the root cause of the issue, but it typically involves parts and labor expenses that could range from $200 to $500 or more.

8. Can a DIY enthusiast fix OBDII code P0328 in a 2013 Nissan Rogue?

- While some may attempt a DIY repair, diagnosing and fixing this code can be complex and may require specialized tools and knowledge. It is often best left to professional mechanics.

9. Will resetting the Check Engine light resolve OBDII code P0328 in a 2013 Nissan Rogue?

- Simply resetting the light will not fix the underlying issue causing the code. It's essential to diagnose the problem, make necessary repairs, and then clear the code to resolve it.

10. How can I prevent OBDII code P0328 from recurring in my 2013 Nissan Rogue?

- To prevent the code from coming back, ensure regular maintenance of your vehicle, address any engine performance issues promptly, and follow the manufacturer's recommended service schedule.

Discuss the causes and fixes for P0328 2013 Nissan Rogue OBDII Code

Submit a New Comment

Code P0328 2013 Nissan Rogue comments

No comments found for this page.