Engine-Codes.com
Engine-Codes – Nissan – P0328 2011 Nissan Rogue

P0328 2011 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The P0328 diagnostic trouble code (DTC) for a 2011 Nissan Rogue indicates a problem with the Knock Sensor Circuit High Input in Bank 1. Common causes include Faulty knock sensor, Wiring issues or shorts in the knock sensor circuit, Corrosion or poor connections in the knock sensor wiring. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0328 2011 Nissan Rogue indicates Knock Sensor Circuit High Input- Bank 1.
Common causes
Common causes include Faulty knock sensor, Wiring issues or shorts in the knock sensor circuit, Corrosion or poor connections in the knock sensor wiring.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0328 2011 Nissan Rogue Description

The P0328 diagnostic trouble code (DTC) for a 2011 Nissan Rogue indicates a problem with the Knock Sensor Circuit High Input in Bank 1. The knock sensor is a crucial component in the engine management system that detects abnormal combustion in the engine, commonly known as knocking or pinging. When the knock sensor detects these abnormal vibrations, it sends a signal to the engine control module (ECM) to adjust the ignition timing to prevent engine damage.

OBDII Code P0328 2011 Nissan Rogue - Knock Sensor Circuit High Input- Bank 1
P0328 2011 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Common Causes of P0328 2011 Nissan Rogue

  1. Faulty knock sensor
  2. Wiring issues or shorts in the knock sensor circuit
  3. Corrosion or poor connections in the knock sensor wiring
  4. Engine overheating leading to knock sensor malfunction
  5. ECM software issues

Symptoms of P0328 2011 Nissan Rogue

  1. Engine knocking or pinging noises
  2. Decreased engine performance
  3. Reduced fuel efficiency
  4. Illuminated check engine light
  5. Engine misfires

How to Fix P0328 2011 Nissan Rogue

  1. Begin by locating the knock sensor in Bank 1, typically located on the engine block.
  2. Inspect the wiring harness connected to the knock sensor for any visible damage, corrosion, or loose connections.
  3. Test the knock sensor using a multimeter to check for proper resistance and continuity.
  4. If the knock sensor is found to be faulty, replace it with a new OEM or high-quality aftermarket sensor.
  5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0328 2011 Nissan Rogue

The cost of repairing a P0328 code on a 2011 Nissan Rogue can vary depending on the specific cause of the issue. In general, the cost of a new knock sensor can range from $50 to $200, with additional costs for labor if the sensor needs to be replaced by a professional mechanic. The total repair cost, including parts and labor, could range from $150 to $400. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location and vehicle specifics.

What does this mean?

Tech Notes for P0328 2011 Nissan Rogue

The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem. If you have another code besides the knock sensor code fix the other issue first.

When is the Code Detected?

An excessively high voltage from the sensor is sent to Electronic Control Module (ECM)

Need more information about the P0328 2011 Nissan Rogue code?

Need more information on how to fix the P0328 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2011 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0328 in a 2011 Nissan Rogue?

- Common symptoms include engine knocking or pinging noises, reduced engine performance, and the illumination of the Check Engine Light.

2. What does the OBDII code P0328 "Knock Sensor Circuit High Input- Bank 1" mean for a 2011 Nissan Rogue?

- This code indicates that the knock sensor in Bank 1 is detecting a higher than normal voltage input, potentially due to a fault in the sensor or its circuit.

3. What are the possible causes of OBDII code P0328 in a 2011 Nissan Rogue?

- The code may be triggered by a faulty knock sensor, wiring issues in the knock sensor circuit, engine misfires, or problems with the engine control module.

4. How can I diagnose the cause of OBDII code P0328 in my 2011 Nissan Rogue?

- Diagnosing this code typically involves checking the knock sensor and its wiring for any damage, testing the sensor's resistance, and inspecting for any engine misfires that may be affecting sensor readings.

5. Can I drive my 2011 Nissan Rogue with OBDII code P0328?

- It is not recommended to drive with this code present, as it can lead to engine performance issues and potential long-term damage if left unresolved.

6. What are the repair options for fixing OBDII code P0328 in a 2011 Nissan Rogue?

- Repair options may include replacing the knock sensor, repairing damaged wiring, addressing any engine misfires, or reprogramming the engine control module.

7. How much does it typically cost to repair OBDII code P0328 in a 2011 Nissan Rogue?

- Repair costs can vary depending on the extent of the issue and the labor rates in your area, but expect to pay anywhere from $200 to $500 for parts and labor.

8. Are there any DIY tips for addressing OBDII code P0328 in a 2011 Nissan Rogue?

- While some may attempt to replace the knock sensor themselves, diagnosis and repair of this code are best left to experienced mechanics due to the complexity of the system.

9. Will resetting the Check Engine Light clear OBDII code P0328 in a 2011 Nissan Rogue?

- Resetting the light may temporarily turn it off, but if the underlying issue causing the code is not fixed, the light will likely reappear once the vehicle is driven and the fault is detected again.

10. How can I prevent OBDII code P0328 from recurring in my 2011 Nissan Rogue?

- Regular maintenance, including timely spark plug replacements and addressing any engine performance issues promptly, can help prevent the reoccurrence of this code.

Discuss the causes and fixes for P0328 2011 Nissan Rogue OBDII Code

Submit a New Comment

Code P0328 2011 Nissan Rogue comments

No comments found for this page.