Engine-Codes.com
Engine-Codes – Nissan – P0328 2011 Nissan Altima Sedan

P0328 2011 Nissan Altima Sedan Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The P0328 diagnostic trouble code (DTC) for a 2011 Nissan Altima Sedan indicates that there is a high input signal detected in the knock sensor circuit for Bank 1. Common causes include Faulty knock sensor, Damaged knock sensor wiring or connectors, Engine mechanical issues causing actual engine knock. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0328 2011 Nissan Altima Sedan indicates Knock Sensor Circuit High Input- Bank 1.
Common causes
Common causes include Faulty knock sensor, Damaged knock sensor wiring or connectors, Engine mechanical issues causing actual engine knock.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0328 2011 Nissan Altima Sedan Description

The P0328 diagnostic trouble code (DTC) for a 2011 Nissan Altima Sedan indicates that there is a high input signal detected in the knock sensor circuit for Bank 1. The knock sensor is a crucial component in the engine management system that detects abnormal combustion, commonly known as engine knock or detonation. When the knock sensor detects these abnormal vibrations, it sends a signal to the engine control module (ECM) to adjust the ignition timing to prevent engine damage.

OBDII Code P0328 2011 Nissan Altima Sedan - Knock Sensor Circuit High Input- Bank 1
P0328 2011 Nissan Altima Sedan Code - Knock Sensor Circuit High Input- Bank 1

Common Causes of P0328 2011 Nissan Altima Sedan

  1. Faulty knock sensor.
  2. Damaged knock sensor wiring or connectors.
  3. Engine mechanical issues causing actual engine knock.
  4. ECM malfunction.
  5. Poor quality fuel causing pre-ignition.

Symptoms of P0328 2011 Nissan Altima Sedan

  1. Check engine light illuminated on the dashboard.
  2. Reduced engine performance and power output.
  3. Decreased fuel efficiency.
  4. Engine pinging or knocking noises.
  5. Rough idling or engine misfires.

How to Fix P0328 2011 Nissan Altima Sedan

  1. Begin by diagnosing the specific cause of the high input signal in the knock sensor circuit using a scan tool to read the DTC and perform further testing.
  2. Inspect the knock sensor wiring and connectors for any signs of damage or corrosion. Repair or replace as necessary.
  3. Test the knock sensor itself for proper operation. Replace if found to be faulty.
  4. Check for any engine mechanical issues that may be causing actual engine knock. Address and repair as needed.
  5. Clear the DTC and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0328 2011 Nissan Altima Sedan

The typical repair costs for addressing a P0328 code on a 2011 Nissan Altima Sedan can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops commonly charge between $80 and $150 per hour for labor. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's advisable to check local rates for a more precise estimate.

What does this mean?

Tech Notes for P0328 2011 Nissan Altima Sedan

The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem. If you have other codes along with the knock sensor code fix the other codes first and see if that fixes the knock sensor code also.

When is the Code Detected?

An excessively high voltage from the sensor is sent to Electronic Control Module (ECM)

Need more information about the P0328 2011 Nissan Altima Sedan code?

Need more information on how to fix the P0328 2011 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2011 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2011 Nissan Altima Sedan Code

1. What are the common symptoms of OBDII code P0328 in a 2011 Nissan Altima Sedan?

- Common symptoms include poor engine performance, reduced fuel efficiency, and potential engine knocking noises.

2. What does the OBDII code P0328 - Knock Sensor Circuit High Input - Bank 1 indicate in a 2011 Nissan Altima Sedan?

- This code indicates that the engine control module (ECM) has detected a high voltage signal from the knock sensor in bank 1.

3. What are possible causes of OBDII code P0328 in a 2011 Nissan Altima Sedan?

- Potential causes include a faulty knock sensor, wiring issues in the knock sensor circuit, or a problem with the ECM.

4. Can driving with OBDII code P0328 in a 2011 Nissan Altima Sedan cause further damage?

- Driving with this code may lead to engine damage due to potential pre-ignition or knocking issues not being properly detected and addressed.

5. How can I diagnose OBDII code P0328 in my 2011 Nissan Altima Sedan?

- Diagnosis typically involves checking the knock sensor and its wiring for any visible damage, as well as testing the sensor's resistance and signal output.

6. Is it safe to continue driving my 2011 Nissan Altima Sedan with OBDII code P0328?

- It is not recommended to drive the vehicle with this code active, as it can lead to engine performance issues and potential damage over time.

7. Can I reset the OBDII code P0328 in my 2011 Nissan Altima Sedan without fixing the underlying issue?

- While you can clear the code with an OBDII scanner, it is crucial to address the root cause to prevent further problems.

8. How much does it typically cost to repair OBDII code P0328 in a 2011 Nissan Altima Sedan?

- The cost of repair can vary depending on the exact cause, but it may involve replacing the knock sensor or repairing wiring issues, with estimated costs ranging from $200 to $500.

9. Are there any DIY repair tips for addressing OBDII code P0328 in a 2011 Nissan Altima Sedan?

- DIY enthusiasts can attempt to inspect the knock sensor and its wiring for any visible damage, but replacing the sensor or addressing wiring issues may require professional help.

10. How can I prevent OBDII code P0328 from recurring in my 2011 Nissan Altima Sedan?

- Regular maintenance, such as keeping the engine well-tuned and addressing any engine performance issues promptly, can help prevent the recurrence of this code.

Discuss the causes and fixes for P0328 2011 Nissan Altima Sedan OBDII Code

Submit a New Comment

Code P0328 2011 Nissan Altima Sedan comments

No comments found for this page.