Engine-Codes - Toyota - P0328 2010 Toyota Camry

P0328 2010 Toyota Camry Code - Knock Sensor 1 Circuit High Input Bank 1

- Code Popularity: 5,154 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 2/3
Table of contents

|What are the Possible Causes of the Code P0328 2010 Toyota Camry?

  • Faulty knock sensor
  • Knock sensor circuit poor electrical connection
  • Knock sensor harness is open or shorted
  • Faulty Engine Control Module (ECM)

|How to Fix the P0328 2010 Toyota Camry Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Code P0328 2010 Toyota Camry Tech Notes

The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem if you have other codes try to fix those first.

|What is the Cost to Diagnose the Code P0328 2010 Toyota Camry?

Labor: 1.0

The cost to diagnose the P0328 2010 Toyota Camry code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your car have Safety Recalls? → Check here

|When is the P0328 2010 Toyota Camry Code Detected?

An excessively high voltage from the sensor is sent to Electronic Control Module (ECM)

|What are Code P0328 2010 Toyota Camry Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Possible Lack/Loss of Power

|What Does the P0328 2010 Toyota Camry Code Mean?

Flat type knock sensors (non-resonant type) have structures that can detect vibrations over a wide band of frequencies: between approximately 6 kHz and 15 kHz.
A knock sensor is fitted onto the engine block to detect engine knocking. The knock sensor contains a piezoelectric element which generates a voltage when it becomes deformed. The voltage is generated when the engine block vibrates due to knocking. Any occurrence of engine knocking can be suppressed by delaying the ignition timing.

Knock Sensor 1 Circuit High Input Bank 1

|Need more Information on the P0328 2010 Toyota Camry Code?

Need more information on how to fix the P0328 2010 Toyota Camry code? Get Access to Factory Service Manuals

|Need Help with the P0328 2010 Toyota Camry Code?

Get the P0328 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area