Engine-Codes.com
Engine-Codes – Nissan – P0328 2010 Nissan Rogue

P0328 2010 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The P0328 diagnostic trouble code (DTC) for a 2010 Nissan Rogue indicates a Knock Sensor Circuit High Input for Bank 1. Common causes include Faulty knock sensor, Damaged wiring or connectors, Short circuit in the knock sensor circuit. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0328 2010 Nissan Rogue indicates Knock Sensor Circuit High Input- Bank 1.
Common causes
Common causes include Faulty knock sensor, Damaged wiring or connectors, Short circuit in the knock sensor circuit.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0328 2010 Nissan Rogue Description

The P0328 diagnostic trouble code (DTC) for a 2010 Nissan Rogue indicates a Knock Sensor Circuit High Input for Bank 1. The knock sensor is a crucial component in the engine management system, responsible for detecting abnormal combustion, often referred to as engine "knocking" or "pinging." When the knock sensor detects these abnormal combustion events, it sends a signal to the engine control module (ECM) to adjust the ignition timing to prevent engine damage and optimize performance.

OBDII Code P0328 2010 Nissan Rogue - Knock Sensor Circuit High Input- Bank 1
P0328 2010 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Common Causes of P0328 2010 Nissan Rogue

  1. Faulty knock sensor
  2. Damaged wiring or connectors
  3. Short circuit in the knock sensor circuit
  4. ECM malfunction
  5. Engine overheating leading to knock sensor damage

Symptoms of P0328 2010 Nissan Rogue

  1. Engine knocking or pinging noises
  2. Reduced engine performance or power
  3. Poor fuel efficiency
  4. Check Engine Light illuminated
  5. Increased emissions

How to Fix P0328 2010 Nissan Rogue

  1. Begin by diagnosing the specific cause of the high input signal using a scan tool to retrieve freeze frame data and live sensor data.
  2. Inspect the knock sensor, wiring, and connectors for any visible damage or corrosion. Replace any damaged components.
  3. Test the knock sensor using a multimeter to ensure it is functioning within specifications.
  4. Check for any short circuits in the knock sensor circuit and repair as necessary.
  5. Clear the DTC and test drive the vehicle to verify that the issue has been resolved.

Cost to Fix P0328 2010 Nissan Rogue

The cost of repairing a P0328 code on a 2010 Nissan Rogue can vary depending on the specific cause of the issue. In general, the cost of replacing a knock sensor and addressing related wiring or connector issues can range from $200 to $500, including parts and labor. Additional costs may apply if the ECM needs to be replaced or reprogrammed. It's important to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on the specific circumstances of your vehicle. Labor rates at auto repair shops typically range from $80 to $150 per hour, but can vary based on location and other factors.

What does this mean?

Tech Notes for P0328 2010 Nissan Rogue

The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem. If you have another code besides the knock sensor code fix the other issue first.

When is the Code Detected?

An excessively high voltage from the sensor is sent to Electronic Control Module (ECM)

Need more information about the P0328 2010 Nissan Rogue code?

Need more information on how to fix the P0328 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2010 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0328 in a 2010 Nissan Rogue?

- Common symptoms include engine knocking or pinging noises, decreased fuel efficiency, and potential loss of power.

2. What does the OBDII code P0328 "Knock Sensor Circuit High Input- Bank 1" indicate in a 2010 Nissan Rogue?

- This code indicates that the knock sensor in Bank 1 is detecting a higher-than-normal input voltage, which can lead to engine performance issues.

3. What are the possible causes of OBDII code P0328 in a 2010 Nissan Rogue?

- Possible causes include a faulty knock sensor, wiring issues in the knock sensor circuit, engine mechanical problems causing knock sensor activation, or a faulty Engine Control Module (ECM).

4. How can I diagnose the cause of OBDII code P0328 in my 2010 Nissan Rogue?

- Diagnosis involves checking the knock sensor and its wiring for damage, inspecting the engine for mechanical issues causing knocking, and testing the ECM for proper functioning.

5. Can I continue driving my 2010 Nissan Rogue with OBDII code P0328 present?

- It's not recommended to drive with this code present, as it can lead to engine damage and decreased performance over time.

6. How is OBDII code P0328 in a 2010 Nissan Rogue typically repaired?

- Repair usually involves replacing the faulty knock sensor, repairing any damaged wiring, addressing any engine mechanical issues, and resetting the ECM.

7. Are there any DIY tips for fixing OBDII code P0328 in a 2010 Nissan Rogue?

- DIY tips include checking and cleaning the knock sensor connections, inspecting wiring for wear or damage, and ensuring the engine is in good condition to prevent knocking.

8. How much does it cost to repair OBDII code P0328 in a 2010 Nissan Rogue?

- The cost of repair can vary depending on the cause of the issue, but it typically ranges from $200 to $500 for parts and labor.

9. Can OBDII code P0328 in a 2010 Nissan Rogue cause long-term damage if left untreated?

- Yes, leaving this code untreated can lead to engine damage, reduced fuel efficiency, and potential safety hazards due to decreased performance.

10. After repairing OBDII code P0328 in a 2010 Nissan Rogue, how can I ensure it doesn't come back?

- Regular maintenance, avoiding harsh driving conditions, and addressing any engine issues promptly can help prevent the recurrence of this code.

Discuss the causes and fixes for P0328 2010 Nissan Rogue OBDII Code

Submit a New Comment

Code P0328 2010 Nissan Rogue comments

No comments found for this page.