Engine-Codes.com
Engine-Codes – Nissan – P0328 2009 Nissan Rogue

P0328 2009 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The P0328 diagnostic trouble code (DTC) indicates that there is a high input signal detected from the knock sensor circuit on Bank 1 in a 2009 Nissan Rogue. Common causes include Faulty knock sensor, Wiring or connector issues in the knock sensor circuit, Engine mechanical problems causing abnormal combustion. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0328 2009 Nissan Rogue indicates Knock Sensor Circuit High Input- Bank 1.
Common causes
Common causes include Faulty knock sensor, Wiring or connector issues in the knock sensor circuit, Engine mechanical problems causing abnormal combustion.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Aug 18, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0328 2009 Nissan Rogue Description

The P0328 diagnostic trouble code (DTC) indicates that there is a high input signal detected from the knock sensor circuit on Bank 1 in a 2009 Nissan Rogue. The knock sensor is a vital component that detects abnormal combustion in the engine, known as knocking or detonation. When the knock sensor detects these irregularities, it sends a signal to the engine control module (ECM) to adjust the ignition timing to prevent engine damage. A high input signal suggests that the knock sensor is detecting excessive engine knock, even when it may not be present. This can lead to poor engine performance, reduced fuel efficiency, and potential long-term engine damage if left unresolved.

OBDII Code P0328 2009 Nissan Rogue - Knock Sensor Circuit High Input- Bank 1
P0328 2009 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Common Causes of P0328 2009 Nissan Rogue

  1. Faulty knock sensor.
  2. Wiring or connector issues in the knock sensor circuit.
  3. Engine mechanical problems causing abnormal combustion.
  4. Engine overheating leading to pre-ignition.
  5. ECM software or hardware issues.

Symptoms of P0328 2009 Nissan Rogue

  1. Engine knocking or pinging noises.
  2. Reduced engine power or acceleration.
  3. Decreased fuel efficiency.
  4. Illumination of the Check Engine Light.
  5. Engine stalling or rough idling.

How to Fix P0328 2009 Nissan Rogue

  1. Diagnose the issue by using a scan tool to confirm the P0328 code and pinpoint the specific problem.
  2. Inspect the knock sensor and its wiring for any damage or corrosion. Replace the knock sensor if necessary.
  3. Check the engine for any mechanical issues that could be causing abnormal combustion, such as carbon buildup or a faulty EGR valve.
  4. Clear the DTC and reset the ECM to see if the code returns after repairs are made.
  5. Test drive the vehicle to ensure the issue is resolved and the symptoms have disappeared.

Cost to Fix P0328 2009 Nissan Rogue

The cost of repairing a P0328 code on a 2009 Nissan Rogue can vary depending on the specific cause of the issue. On average, the cost of replacing a knock sensor ranges from $150 to $250, including parts and labor. However, additional costs may apply if there are other underlying issues contributing to the code. It's recommended to consult a professional mechanic for an accurate diagnosis and cost estimate based on the specific circumstances of your vehicle.

What does this mean?

Tech Notes for P0328 2009 Nissan Rogue

The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem. If you have another code besides the knock sensor code fix the other issue first.

When is the Code Detected?

An excessively high voltage from the sensor is sent to Electronic Control Module (ECM)

Need more information about the P0328 2009 Nissan Rogue code?

Need more information on how to fix the P0328 2009 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2009 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2009 Nissan Rogue Code

1. What does OBDII code P0328 mean for a 2009 Nissan Rogue?

The code P0328 on a 2009 Nissan Rogue indicates a Knock Sensor Circuit High Input on Bank 1.

2. What are the common symptoms of a P0328 code in a 2009 Nissan Rogue?

Common symptoms of a P0328 code in a 2009 Nissan Rogue may include engine pinging or knocking noises, reduced engine performance, and illumination of the Check Engine Light.

3. What are the possible causes of a P0328 code in a 2009 Nissan Rogue?

Possible causes of a P0328 code in a 2009 Nissan Rogue include a faulty knock sensor, wiring issues in the knock sensor circuit, or a problem with the engine control module (ECM).

4. How can I diagnose a P0328 code in a 2009 Nissan Rogue?

Diagnosing a P0328 code in a 2009 Nissan Rogue typically involves checking the knock sensor and its wiring for any visible damage or corrosion, as well as using a scan tool to monitor sensor data and ECM signals.

5. Can I continue driving my 2009 Nissan Rogue with a P0328 code?

It is not recommended to continue driving your 2009 Nissan Rogue with a P0328 code, as it can lead to engine damage and reduced performance. It's best to address the issue promptly.

6. How can I repair a P0328 code in a 2009 Nissan Rogue?

Repairing a P0328 code in a 2009 Nissan Rogue may involve replacing the knock sensor, repairing any damaged wiring, or reprogramming the ECM. Consult a professional mechanic for accurate diagnosis and repair.

7. Are there any DIY tips for fixing a P0328 code in a 2009 Nissan Rogue?

While basic inspections like checking for loose connections or damaged wiring can be done DIY, it's recommended to seek professional help for a thorough diagnosis and repair of a P0328 code in a 2009 Nissan Rogue.

8. Will resetting the Check Engine Light fix a P0328 code in a 2009 Nissan Rogue?

Simply resetting the Check Engine Light will not fix a P0328 code in a 2009 Nissan Rogue. The underlying issue causing the code needs to be diagnosed and addressed to prevent further problems.

9. How much does it cost to repair a P0328 code in a 2009 Nissan Rogue?

The cost of repairing a P0328 code in a 2009 Nissan Rogue can vary depending on the cause of the issue, parts needed for replacement, and labor costs. It's advisable to get estimates from reputable mechanics.

10. Can a P0328 code in a 2009 Nissan Rogue affect fuel efficiency?

Yes, a P0328 code in a 2009 Nissan Rogue can potentially affect fuel efficiency, as it may lead to incorrect timing adjustments and engine performance issues that can impact fuel consumption.

Discuss the causes and fixes for P0328 2009 Nissan Rogue OBDII Code

Submit a New Comment

Code P0328 2009 Nissan Rogue comments

No comments found for this page.