Engine-Codes.com
Engine-Codes – Nissan – P0328 2008 Nissan Rogue

P0328 2008 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The P0328 diagnostic trouble code (DTC) indicates that there is a high input signal detected from the knock sensor in Bank 1 of the engine. Common causes include Faulty knock sensor, Damaged wiring or connectors in the knock sensor circuit, Engine mechanical issues causing abnormal vibrations. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0328 2008 Nissan Rogue indicates Knock Sensor Circuit High Input- Bank 1.
Common causes
Common causes include Faulty knock sensor, Damaged wiring or connectors in the knock sensor circuit, Engine mechanical issues causing abnormal vibrations.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0328 2008 Nissan Rogue Description

The P0328 diagnostic trouble code (DTC) indicates that there is a high input signal detected from the knock sensor in Bank 1 of the engine. The knock sensor is a crucial component that detects engine knocking or pinging, which can occur when the air-fuel mixture ignites prematurely in the combustion chamber. This can lead to engine damage if not addressed promptly.

OBDII Code P0328 2008 Nissan Rogue - Knock Sensor Circuit High Input- Bank 1
P0328 2008 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Common Causes of P0328 2008 Nissan Rogue

  1. Faulty knock sensor
  2. Damaged wiring or connectors in the knock sensor circuit
  3. Engine mechanical issues causing abnormal vibrations
  4. Incorrect ignition timing
  5. Engine overheating

Symptoms of P0328 2008 Nissan Rogue

  1. Engine knocking or pinging noises
  2. Reduced engine performance or power
  3. Decreased fuel efficiency
  4. Illuminated check engine light
  5. Engine hesitation or stalling

How to Fix P0328 2008 Nissan Rogue

  1. Diagnose the issue by using a scan tool to retrieve the DTC and inspect the knock sensor and wiring for any visible damage.
  2. Test the knock sensor using a multimeter to check for proper resistance and voltage readings.
  3. Replace the knock sensor if it is faulty, ensuring proper installation and connection to the wiring harness.
  4. Clear the DTC from the ECM memory and perform a test drive to verify that the issue has been resolved.
  5. If the problem persists, further diagnosis may be required to identify any underlying engine mechanical issues.

Cost to Fix P0328 2008 Nissan Rogue

The cost of repairing a P0328 code on a 2008 Nissan Rogue can vary depending on the location, labor rates, and the specific parts needed for the repair. On average, the cost of replacing a knock sensor ranges from $150 to $250, including parts and labor. Additional costs may apply if wiring repairs or further diagnostics are needed. It is advisable to consult with a trusted mechanic or auto repair shop to get an accurate estimate based on your specific vehicle and location. Labor rates typically range from $80 to $150 per hour, but can vary based on the shop's location and expertise.

What does this mean?

Tech Notes for P0328 2008 Nissan Rogue

The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem. If you have another code besides the knock sensor code fix the other issue first.

When is the Code Detected?

An excessively high voltage from the sensor is sent to Electronic Control Module (ECM)

Need more information about the P0328 2008 Nissan Rogue code?

Need more information on how to fix the P0328 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2008 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0328 in a 2008 Nissan Rogue?

- Common symptoms include poor engine performance, reduced fuel efficiency, and in some cases, engine misfires.

2. What can cause the Knock Sensor Circuit High Input - Bank 1 code P0328 in a 2008 Nissan Rogue?

- Possible causes include a faulty knock sensor, wiring issues, a corroded connector, or a problem with the engine control module.

3. How does a malfunctioning knock sensor affect the engine in a 2008 Nissan Rogue?

- A faulty knock sensor can cause the engine to run inefficiently, leading to decreased performance and potential damage due to pre-ignition or detonation.

4. What should I do if my 2008 Nissan Rogue shows code P0328 related to the knock sensor circuit high input?

- It is recommended to have a qualified mechanic diagnose the issue to determine the exact cause and proceed with necessary repairs.

5. Can I continue driving my 2008 Nissan Rogue with the P0328 code for the knock sensor circuit high input?

- It is not advisable to drive the vehicle with this code present, as it can lead to further engine damage and potential safety risks.

6. How can I troubleshoot the knock sensor circuit high input issue in my 2008 Nissan Rogue?

- You can start by checking the wiring and connector for any visible damage or corrosion, and then test the knock sensor itself for proper function.

7. Is it possible to reset the OBDII code P0328 in a 2008 Nissan Rogue without fixing the underlying issue?

- While you can clear the code temporarily, it is likely to reappear until the root cause of the problem is addressed and resolved.

8. Are there any DIY repair tips for fixing the knock sensor circuit high input issue in a 2008 Nissan Rogue?

- DIY repair is not recommended for this issue, as it involves intricate engine components and precise electrical testing best handled by a professional.

9. How much does it typically cost to repair the knock sensor circuit high input problem in a 2008 Nissan Rogue?

- Repair costs can vary depending on the exact cause of the issue, but it may range from $200 to $500 or more, including parts and labor.

10. Can a faulty knock sensor in a 2008 Nissan Rogue lead to other problems if left unrepaired?

- Yes, ignoring a faulty knock sensor can lead to decreased engine performance, reduced fuel efficiency, and potential long-term damage to the engine.

Discuss the causes and fixes for P0328 2008 Nissan Rogue OBDII Code

Submit a New Comment

Code P0328 2008 Nissan Rogue comments

No comments found for this page.