P0328 Code - Knock Sensor Circuit High Voltage Bank 1
Quick Answer
The P0328 code indicates that there is a high voltage condition in the knock sensor circuit for bank 1 of the engine. Common causes include Faulty knock sensor, Wiring issues or shorts in the knock sensor circuit, Corrosion or poor connections in the sensor wiring. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0328 indicates Knock Sensor Circuit High Voltage Bank 1.
- Common causes
- Common causes include Faulty knock sensor, Wiring issues or shorts in the knock sensor circuit, Corrosion or poor connections in the sensor wiring.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0328 Description
The P0328 code indicates that there is a high voltage condition in the knock sensor circuit for bank 1 of the engine. The knock sensor is responsible for detecting abnormal vibrations or knocking in the engine, which can be caused by issues such as pre-ignition or detonation. When the knock sensor detects these vibrations, it sends a signal to the engine control module (ECM) to adjust the ignition timing to prevent engine damage. A high voltage in the knock sensor circuit can lead to incorrect adjustments in the ignition timing, potentially causing poor engine performance, reduced fuel efficiency, and increased emissions. If left unaddressed, this issue can lead to more severe engine problems over time.
Common Causes of P0328
- Faulty knock sensor
- Wiring issues or shorts in the knock sensor circuit
- Corrosion or poor connections in the sensor wiring
- Engine overheating
- Engine mechanical problems causing abnormal vibrations
Symptoms of P0328
- Engine knocking or pinging noises
- Reduced engine power or acceleration
- Decreased fuel efficiency
- Illuminated check engine light
- Rough idling or engine stalling
How to Fix P0328
- Begin by diagnosing the specific cause of the high voltage condition in the knock sensor circuit using a scan tool to read the fault codes.
- Inspect the wiring and connections to the knock sensor for any damage, corrosion, or loose connections.
- Test the knock sensor itself to determine if it is functioning properly or needs replacement.
- Replace the knock sensor if it is found to be faulty, ensuring proper installation and connection.
- Clear the fault codes from the ECM and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P0328
The cost of repairing a high voltage condition in the knock sensor circuit can vary depending on the cause of the issue and the specific vehicle. In general, replacing a knock sensor can cost between $100 and $300 for the part alone, with additional labor costs for diagnosis, installation, and testing. Overall, the total repair costs for this issue may range from $200 to $500 or more, depending on the extent of the repairs needed. It is recommended to consult with a qualified mechanic or repair shop for a more accurate estimate based on your vehicle's make and model.
Tech Notes for P0328
Need more information about the P0328 code?
Need more information on how to fix the P0328 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0328 code diagnosed by a professional: Find a repair shop in your area
Code P0328 Information for Specific Makes
- P0328 Acura — Knock Sensor Circuit High Voltage
- P0328 Audi — Knock Sensor 1 Circuit High
- P0328 BMW — Knock sensor 1 Circuit High Input
- P0328 Buick — Knock Sensor Circuit High Voltage Bank 1
- P0328 Cadillac — Knock Sensor Circuit High Voltage Bank 1
- P0328 Chevrolet — Knock Sensor Circuit High Voltage Bank 1
- P0328 Ford — Knock Sensor 1 Circuit High Bank 1
- P0328 GMC — Knock Sensor Circuit High Voltage Bank 1
- P0328 Honda — Knock Sensor Circuit High Voltage
- P0328 Hyundai — Knock Sensor 1 Circuit High Input
- P0328 Infiniti — Knock Sensor Circuit High Input- Bank 1
- P0328 Isuzu — Knock Sensor 1 Circuit High Voltage
- P0328 KIA — Knock Sensor 1 Circuit High Input
- P0328 Lexus — Knock Sensor 1 Circuit High Input
- P0328 Mazda — Knock Sensor circuit high input
- P0328 Mercedes-Benz — Knock/Combustion Vibration Sensor 1 Circuit High Bank 1
- P0328 MINI — Knock sensor 1 Circuit High Input
- P0328 Mitsubishi — Knock Sensor Circuit High Bank 1
- P0328 Nissan — Knock Sensor Circuit High Input- Bank 1
- P0328 Scion — Knock Sensor 1 Circuit High Input
- P0328 Subaru — Knock Sensor 1 Circuit High Input - Bank 1 Or Single Sensor
- P0328 Suzuki — Knock Sensor Circuit High Input
- P0328 Toyota — Knock Sensor 1 Circuit High Input
- P0328 Volkswagen — Knock Sensor 1 Circuit High
Frequently Asked Questions about P0328 Code
1. What are the common symptoms of OBDII code P0328 (Knock Sensor Circuit High Voltage Bank 1)?
- Common symptoms include decreased engine performance, engine pinging or knocking noises, and illuminated Check Engine light.
2. What causes the OBDII code P0328 to trigger?
- The code is typically triggered by a faulty knock sensor, wiring issues in the knock sensor circuit, or high voltage in the knock sensor circuit on Bank 1.
3. How can I diagnose the cause of OBDII code P0328?
- Diagnosing the code involves testing the knock sensor, inspecting the wiring harness for damage, checking for loose connections, and verifying the knock sensor signal.
4. Can a faulty knock sensor affect vehicle performance?
- Yes, a faulty knock sensor can lead to reduced engine performance, poor fuel efficiency, and potential engine damage if left unresolved.
5. Is it safe to continue driving with OBDII code P0328 present?
- It is not recommended to continue driving with the code active, as it can lead to engine issues and may cause further damage over time.
6. How can I repair OBDII code P0328 on my vehicle?
- Repairing the code involves replacing the faulty knock sensor, repairing any damaged wiring, and clearing the code with an OBDII scanner.
7. Are there any preventative measures to avoid OBDII code P0328 from occurring?
- Regular maintenance checks, prompt repair of any engine issues, and using high-quality fuel can help prevent the occurrence of the code.
8. Can extreme weather conditions affect the knock sensor and trigger OBDII code P0328?
- Yes, extreme temperatures or moisture can potentially affect the knock sensor and contribute to triggering the code.
9. Is it possible for a DIY enthusiast to fix OBDII code P0328 at home?
- Depending on their skill level and access to tools, DIY enthusiasts may be able to replace the knock sensor and address wiring issues at home.
10. Will resetting the OBDII system clear the code P0328 permanently?
- Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear.
Discuss the causes and fixes for P0328 OBDII Code
-
Would this cause a vehicle to not start? I have a nissan Frontier and I get a p0328 reading on the computer. It will not start. I thought it could be the battery before I checked the computer reading and with replacing the battery the vehicle still will not start.
-
There are many thing that can cause the problem, but definitely not the knock sensor. Is the engine cranking? if there is not cranking then the problem could be the starter motor. If it is cranking then the problem could be a fuel pump.
-
I have a 2007 Chevy Equinox and Im getting the P0328 reading. Could these still be the possible causes?
- Faulty knock sensor
- Knock sensor circuit poor electrical connection
- Knock sensor harness is open or shorted
- Faulty Engine Control Module (ECM)
This just started the other day. The vehical is running file, just the check engine light came on and this is the reading I received. -
I have a 2004 Nissan Murano, am getting P0328 code. Please where is the Knock Sensor located.
-
The knock sensor on your 2004 Nissan Murano is under the intake manifold
Click here to enlarge image -
We're is the knock sensor on my 2004 Xterra? And would it have anything to do with it how rich or lean the car runs.
-
On your 2004 Nissan Xterra, the knock sensor is located under the intake manifold, right in the center of the engine valley (between the cylinder banks). It’s a bit tricky to reach—it usually requires removing the intake manifold to access and replace it.
Does it affect how rich or lean the engine runs?
Not directly—but indirectly, yes.
The knock sensor’s job is to detect engine knock (pinging) and send a signal to the ECU, which will then adjust ignition timing to prevent engine damage.
If the sensor is faulty (as suggested by code P0328 – Knock Sensor Circuit High Voltage Bank 1), the ECU may go into a safe mode, reducing performance and sometimes altering fuel timing or enrichment slightly as a precaution. That can cause:
- Poor fuel economy
- Richer-than-normal air/fuel mixture
- Reduced power
It won’t directly control fuel mixture like the oxygen sensors or MAF sensor do, but it can still influence how the engine runs overall.
What you can do:
- If you're getting P0328, the knock sensor might be disconnected, damaged, or have a wiring issue.
- Check the wiring harness and connector before diving into a replacement—it’s a big job due to the sensor’s location.
Let us know if you want steps on how to test or replace it!
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.