P0304 KIA Code - Cylinder 4 Misfire Detected
Quick Answer
The P0304 diagnostic trouble code indicates that cylinder 4 in the engine is misfiring. Common causes include Faulty ignition coil or spark plug, Clogged fuel injector, Vacuum leak. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0304 KIA indicates Cylinder 4 Misfire Detected.
- Common causes
- Common causes include Faulty ignition coil or spark plug, Clogged fuel injector, Vacuum leak.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0304 KIA Description
The P0304 diagnostic trouble code indicates that cylinder 4 in the engine is misfiring. This means that the fuel-air mixture in that particular cylinder is not igniting properly, leading to a noticeable lack of power, rough idle, and potentially even engine stalling. A misfire can cause damage to the catalytic converter over time if not addressed promptly.
Common Causes of P0304 KIA
- Faulty ignition coil or spark plug
- Clogged fuel injector
- Vacuum leak
- Low compression in the cylinder
- Issues with the engine control module (ECM)
Symptoms of P0304 KIA
- Engine misfiring or shaking
- Loss of power or acceleration
- Rough idle or vibrations
- Check Engine Light illuminated
- Increased fuel consumption
How to Fix P0304 KIA
- Diagnose the specific cause by performing a thorough inspection of the ignition system, fuel system, and compression levels.
- Replace the faulty ignition coil or spark plug in cylinder 4.
- Clean or replace the clogged fuel injector.
- Repair any vacuum leaks that may be present.
- Perform a compression test to check for any issues with the cylinder.
Cost to Fix P0304 KIA
The cost of repairing a cylinder 4 misfire can vary depending on the root cause of the issue. On average, you can expect to pay anywhere from $100 to $500 for parts and labor. Keep in mind that diagnostic time and labor rates can impact the overall cost, so it's best to get a specific quote from a trusted auto repair shop.
Tech Notes for P0304 KIA
There is a Factory Service Bulletin to upgrade the Powertrain Control Module (PCM) of some 2010 Model Year Forte (TD) Sedan and Koup with 2.0L engines manufactured between 3/5/09~3/17/10. This reflash has enhanced VCM (Variable Charge Motion) Actuator logic to improve a rough idle condition at start-up or a MIL ON and stored DTC P0304 set at start-up. To improve customer satisfaction Kia is requesting the completion of this Service Action on all affected 2010 Forte & Forte Koup w/2.0L engine vehicles.
When is the Code Detected?
Need more information about the P0304 KIA code?
Need more information on how to fix the P0304 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0304 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0304 KIA Code
1. What are the common symptoms of OBDII code P0304 in a KIA, indicating a Cylinder 4 Misfire Detected?
- Common symptoms include engine misfiring, rough idling, loss of power, and potential engine vibrations.
2. What are the typical causes of OBDII code P0304 in a KIA?
- The most common causes of this code are spark plug issues, faulty ignition coil, vacuum leaks, fuel injector problems, or low compression in cylinder 4.
3. How can I diagnose the reason behind OBDII code P0304 in my KIA?
- Diagnose by checking spark plugs, ignition coils, fuel injectors, vacuum hoses, compression levels, and performing a visual inspection for any visible damages.
4. Can a dirty or clogged fuel injector trigger OBDII code P0304 in a KIA?
- Yes, a dirty or clogged fuel injector can disrupt the air-fuel mixture in cylinder 4, leading to misfires and triggering the P0304 code.
5. Is it safe to drive my KIA with OBDII code P0304 indicating a Cylinder 4 Misfire Detected?
- It is not recommended to drive your KIA with a misfire, as it can cause damage to the catalytic converter and other components. It's best to address the issue promptly.
6. How can I repair OBDII code P0304 in my KIA at home?
- You can try DIY solutions like replacing spark plugs, ignition coils, or cleaning fuel injectors. However, for a thorough diagnosis and repair, it's advisable to seek professional help.
7. Will resetting the OBDII code P0304 in my KIA make the issue go away permanently?
- Resetting the code without addressing the underlying cause will not fix the problem permanently. It's essential to diagnose and repair the root issue to prevent the code from reoccurring.
8. Can extreme weather conditions contribute to triggering OBDII code P0304 in a KIA?
- Yes, extreme temperatures can sometimes exacerbate existing issues related to ignition components or fuel delivery, potentially leading to misfires and triggering the P0304 code.
9. How much can I expect to pay for professional repair of OBDII code P0304 in my KIA?
- The cost of repairing OBDII code P0304 can vary based on the underlying issue, but it may range from $100 to $500 or more, depending on the parts and labor required.
10. Will regularly maintaining my KIA help prevent OBDII code P0304 from occurring?
- Yes, regular maintenance such as changing spark plugs, inspecting ignition components, and ensuring proper fuel system operation can help prevent misfires and the occurrence of code P0304.
Discuss the causes and fixes for P0304 KIA OBDII Code
-
Code P0304 on 2004 Kia Sedona V6 3.5L engine . Changed plugs and wires and coil short boots about a year ago and now this code came up. swapped plugs from #4 to #6 and and now the light is coming on and off intermittently. Same Cyl misfire. I'm going to Swap ignition coils today from $ to 6 and clear codes and see what happens. Any suggestions please advise . Appreciate the help.
-
Swapping coils it's the best option to try to diagnose the problem. Also, I suggest to use high octane gas and if possible add some fuel additive. Dirty fuel injector can also cause the same problem.
-
Code p0304 on kia Sedona 2004.ater changing the plugs,the problem has stopped
-
had multiple issue with code P304 on my 2010 Kia Forte.
I brought it to a mechanic and they wanted $400 to change sparks & coils. told them no thanks.
I changed coils and it worked for about 4 months and the code tripped again. Tried fuel injector cleaner and changed spark plugs which were needed and worked until recently when I let the car sit for 1 week while I drove my SUV in the snowy conditions. Ran the car for 15 minutes, did an oil change. Started it the next let it warm up and soon as I got on the road, I'm getting intermittent engine light. (OBDII reads as P304) Light goes off if I'm coasting down a hill and no strain on the engine... any ideas? -
What is the engine size of your Forte?
There is a factory service bulletin for the Forte 2.0 with the P0304 code. The factory recommends reprogramming the Engine Control Module (ECM) to fix the problem. See "Tech Notes" above, -
If the engine is 2.0, then you should reprogram the ECM, there is Factory Service Bulletin for that problem.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.