P0304 2016 Honda CR-V Code - No. 4 Cylinder Misfire Detected
Quick Answer
When the OBD-II system in a 2016 Honda CR-V detects a misfire in the No. Common causes include Faulty spark plug, Failing ignition coil, Clogged or malfunctioning fuel injector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0304 2016 Honda CR-V indicates No. 4 Cylinder Misfire Detected.
- Common causes
- Common causes include Faulty spark plug, Failing ignition coil, Clogged or malfunctioning fuel injector.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0304 2016 Honda CR-V Description
When the OBD-II system in a 2016 Honda CR-V detects a misfire in the No. 4 cylinder, it triggers the P0304 diagnostic trouble code. This code indicates that the engine's computer has detected a problem with the ignition or fuel system that is causing the No. 4 cylinder to misfire. A misfire can lead to poor engine performance, reduced fuel efficiency, increased emissions, and potential damage to the catalytic converter over time. The misfire could be caused by issues such as a faulty spark plug, ignition coil, fuel injector, vacuum leak, or even internal engine problems like low compression or a leaking head gasket. It is important to address this issue promptly to prevent further damage to the engine and ensure optimal performance of the vehicle.
Common Causes of P0304 2016 Honda CR-V
- Faulty spark plug
- Failing ignition coil
- Clogged or malfunctioning fuel injector
- Vacuum leak in the intake system
- Low compression in the No. 4 cylinder
Symptoms of P0304 2016 Honda CR-V
- Engine misfiring or running rough
- Loss of power or acceleration
- Rough idling or shaking while idle
- Increased fuel consumption
- Check engine light illuminated on the dashboard
How to Fix P0304 2016 Honda CR-V
- Diagnose the specific cause of the misfire by checking the spark plug, ignition coil, fuel injector, vacuum lines, and compression in the No. 4 cylinder.
- Replace the faulty spark plug or ignition coil, if necessary.
- Clean or replace the clogged fuel injector.
- Repair any vacuum leaks in the intake system.
- Address any internal engine issues causing low compression in the No. 4 cylinder.
Cost to Fix P0304 2016 Honda CR-V
The cost of repairing a P0304 code in a 2016 Honda CR-V can vary depending on the specific cause of the misfire and the cost of parts and labor in your area. A rough estimate for this repair could range from $100 to $500, including parts and labor. However, it is recommended to obtain quotes from local auto repair shops for a more accurate cost estimate. Factors such as the location of the repair shop, the vehicle's make and model, and the severity of the issue can impact the final cost.
Tech Notes for P0304 2016 Honda CR-V
Need more information about the P0304 2016 Honda CR-V code?
Need more information on how to fix the P0304 2016 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0304 2016 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0304 2016 Honda CR-V Code
1. What does OBDII code P0304 mean on a 2016 Honda CR-V?
P0304 indicates a misfire has been detected in cylinder No. 4 of the engine.
2. What are the common symptoms of a P0304 code in a 2016 Honda CR-V?
Symptoms may include rough idling, reduced engine performance, poor fuel economy, and the Check Engine Light turning on.
3. What causes a P0304 code in a 2016 Honda CR-V?
Common causes include a faulty spark plug, a bad ignition coil, a clogged fuel injector, low engine compression, or a vacuum leak affecting cylinder No. 4.
4. Can a bad spark plug cause the P0304 code in my 2016 Honda CR-V?
Yes, a worn or fouled spark plug in cylinder No. 4 is one of the most common reasons for this code.
5. How can I fix a P0304 code on a 2016 Honda CR-V?
Start by inspecting and replacing the spark plug and ignition coil in cylinder No. 4. If the problem persists, check the fuel injector, compression, and for vacuum leaks.
6. Is it safe to drive a 2016 Honda CR-V with a P0304 code?
Driving with a P0304 code can damage the engine or catalytic converter if not addressed promptly. It’s best to fix the issue as soon as possible.
7. How do I diagnose the P0304 code on my 2016 Honda CR-V?
Use an OBDII scanner to confirm the code, then inspect the spark plug, ignition coil, and fuel injector in cylinder No. 4. A compression test or smoke test may also be needed.
8. Can low fuel pressure cause a P0304 code in a 2016 Honda CR-V?
Yes, low fuel pressure or a clogged fuel injector can prevent proper combustion in cylinder No. 4, triggering the code.
9. How much does it cost to fix a P0304 code on a 2016 Honda CR-V?
The cost varies depending on the issue. Replacing a spark plug or ignition coil may cost $100–$300, while more complex repairs like fixing compression issues can cost significantly more.
10. Can a dirty air filter cause a P0304 code in my 2016 Honda CR-V?
While unlikely, a severely clogged air filter can affect overall engine performance and contribute to misfires, including in cylinder No. 4.
Discuss the causes and fixes for P0304 2016 Honda CR-V OBDII Code
Code P0304 2016 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.