P0302 Acura Code - No. 2 Cylinder Misfire Detected
Quick Answer
The diagnostic trouble code (DTC) P0302 for Acura vehicles indicates that a misfire has been detected in the No. Common causes include Faulty spark plug in the No, 2 cylinder, Failing ignition coil specific to the No. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0302 Acura indicates No. 2 Cylinder Misfire Detected.
- Common causes
- Common causes include Faulty spark plug in the No, 2 cylinder, Failing ignition coil specific to the No.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0302 Acura Description
The diagnostic trouble code (DTC) P0302 for Acura vehicles indicates that a misfire has been detected in the No. 2 cylinder of the engine. This means that the cylinder is not contributing its fair share of power to the engine, leading to a rough running condition, decreased performance, and potentially increased emissions.
Common Causes of P0302 Acura
- Faulty spark plug in the No. 2 cylinder
- Failing ignition coil specific to the No. 2 cylinder
- Clogged or malfunctioning fuel injector in the No. 2 cylinder
- Low compression in the No. 2 cylinder
- Vacuum leak affecting the No. 2 cylinder
Symptoms of P0302 Acura
- Check engine light illuminated
- Engine running rough or vibrating
- Loss of power or acceleration
- Increased fuel consumption
- Engine stalling or hesitation
How to Fix P0302 Acura
- Diagnose the specific cause of the misfire by performing a thorough inspection of the spark plug, ignition coil, fuel injector, and compression in the No. 2 cylinder.
- Replace the faulty spark plug or ignition coil if they are found to be defective.
- Clean or replace the clogged fuel injector in the No. 2 cylinder.
- Perform a compression test to determine if there is a compression issue in the No. 2 cylinder, and address as necessary.
- Clear the trouble code and test drive the vehicle to ensure the misfire has been resolved.
Cost to Fix P0302 Acura
The cost of repairing a No. 2 cylinder misfire in an Acura can vary depending on the specific cause of the issue and the cost of parts and labor in your area. On average, you can expect to pay anywhere from $100 to $500 for parts and labor. Keep in mind that labor rates at auto repair shops can range from $80 to $150 per hour, so it's advisable to get a few quotes from different shops to find the best price. Additionally, the cost may be higher if the issue requires more extensive repairs or if the vehicle has multiple underlying problems contributing to the misfire.
Tech Notes for P0302 Acura
User Submitted Video
Need more information about the P0302 Acura code?
Need more information on how to fix the P0302 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0302 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0302 Acura Code
What does the OBDII code P0302 mean on an Acura?
P0302 indicates that the engine control module (ECM) has detected a misfire in cylinder number 2, which can affect performance and emissions.
What are the symptoms of a P0302 code in an Acura?
Symptoms may include rough idling, reduced engine performance, poor fuel economy, a noticeable loss of power, and the check engine light illuminating.
What are the common causes of a P0302 code?
The most common causes include a faulty spark plug, a bad ignition coil, a clogged fuel injector, low compression in the cylinder, or vacuum leaks near cylinder 2.
How can I diagnose the P0302 code on my Acura?
Start by inspecting the spark plug and ignition coil for cylinder 2. Check the fuel injector for clogs, test for proper fuel pressure, and perform a compression test on the cylinder.
Can a P0302 code damage my Acura’s engine if left unresolved?
Yes, prolonged driving with a misfire can cause damage to the catalytic converter, increase emissions, and lead to further engine issues.
How do I fix the P0302 code on my Acura?
Repairs may involve replacing the spark plug or ignition coil for cylinder 2, cleaning or replacing the fuel injector, fixing vacuum leaks, or addressing low cylinder compression.
Can bad fuel cause a P0302 code in an Acura?
Yes, contaminated or poor-quality fuel can lead to misfires, including those detected in cylinder 2, so using clean, high-quality fuel is important.
Is it safe to drive my Acura with a P0302 code?
Driving with a P0302 code is not recommended, as it can lead to further damage and reduced performance. Address the issue as soon as possible.
How much does it cost to fix a P0302 code on an Acura?
Repair costs vary, but replacing a spark plug or ignition coil might cost $100-$300, while more complex repairs, like fixing compression issues, can be significantly more expensive.
Can a dirty air filter cause a P0302 code on an Acura?
While less common, a severely clogged air filter can restrict airflow, potentially contributing to misfires. Replacing a dirty air filter is a simple maintenance step to consider.
Discuss the causes and fixes for P0302 Acura OBDII Code
Code P0302 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.