Engine-Codes - Mitsubishi - P0300 Mitsubishi

P0300 Mitsubishi Code - Cylinder Misfire Detected Random Cylinders

- Code Popularity: 98,174 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents

What are the Possible Causes of the Code P0300 Mitsubishi?

  • Faulty spark plug (s)
  • Faulty ignition coil (s)
  • Clogged or faulty fuel injector (s)
  • Intake air leak
  • Fuel injectors harness is open or shorted
  • Fuel Injectors circuit poor electrical connection
  • Ignition coils harness is open or shorted
  • Ignition coils circuit poor electrical connection
  • Insufficient cylinders compression
  • Incorrect fuel pressure

How to Fix the P0300 Mitsubishi Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Code P0300 Mitsubishi Tech Notes

The P0300 code means that a cylinder(s) is misfiring or is randomly misfiring. Start by checking for intake leaks, intake gaskets are common caused of multi-cylinder misfiring. If no leak are found the next step is to replace the spark plugs. If the problem persists more tests needs to be done to diagnose problem, see "Possible Causes"

What is the Cost to Diagnose the Code P0300 Mitsubishi?

Labor: 1.0

The cost to diagnose the P0300 Mitsubishi code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your Mitsubishi have Safety Recalls? → Check here

When is the P0300 Mitsubishi Code Detected?

The control module monitors the crankshaft speed and has detected a misfire condition

What are Code P0300 Mitsubishi Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Lack/loss of power
  • Hard start
  • Engine hesitation

What Does the P0300 Mitsubishi Code Mean?

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.

P0300 Mitsubishi Code - Cylinder Misfire Detected Random Cylinders

Need more Information on the P0300 Mitsubishi Code?

Need more information on how to fix the P0300 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the P0300 Mitsubishi Code?

Get the P0300 Mitsubishi code diagnosed by a professional: Find a repair shop in your area