Engine-Codes - Nissan - P0300 2007 NISSAN PATHFINDER

P0300 2007 NISSAN PATHFINDER Code - Cylinder Misfire Detected Random Cylinders

- Code Popularity: 14,451 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents

|What are the Possible Causes of the P0300 2007 NISSAN PATHFINDER Code?

  • Faulty spark plug (s)
  • Faulty ignition coil (s)
  • Clogged or faulty fuel injector (s)
  • Intake air leak
  • Fuel injectors harness is open or shorted
  • Fuel Injectors circuit poor electrical connection
  • Ignition coils harness is open or shorted
  • Ignition coils circuit poor electrical connection
  • Insufficient cylinders compression
  • Incorrect fuel pressure

|How to Fix the P0300 2007 NISSAN PATHFINDER Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0300 2007 NISSAN PATHFINDER code tech notes

The P0300 code means that a cylinder(s) is misfiring or is randomly misfiring. Start by checking for intake leaks, intake gaskets are common causes of multi-cylinder misfiring. If no leaks are found the next step is to replace the spark plugs. If the problem persists more tests need to be done to diagnose the problem, see "Possible Causes".

|What is the cost to diagnose the P0300 2007 NISSAN PATHFINDER code?

Labor: 1.0

The cost to diagnose the P0300 2007 NISSAN PATHFINDER code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P0300 2007 NISSAN PATHFINDER code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Lack/loss of power
  • Hard start
  • Engine hesitation

|What Does the P0300 2007 NISSAN PATHFINDER Code Mean?

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring. The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module monitors the crankshaft speed and has detected a misfire condition

Cylinder Misfire Detected Random Cylinders

|Need more information with the P0300 2007 NISSAN PATHFINDER code?

Need more information on how to fix the P0300 2007 NISSAN PATHFINDER code?
Get Access to Factory Service Manuals

|Need help with a P0300 2007 NISSAN PATHFINDER code?

Get the p0300 2007 nissan pathfinder code diagnosed by a professional: Find a repair shop in your area