Engine-Codes.com
Engine-Codes – Ford – P0298 2011 Ford Fusion

P0298 2011 Ford Fusion Code - Engine Oil Over Temperature Condition

Quick Answer

The diagnostic trouble code P0298 for a 2011 Ford Fusion indicates an engine oil over-temperature condition. Common causes include Low engine oil level, Faulty oil pump, Clogged oil filter. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0298 2011 Ford Fusion indicates Engine Oil Over Temperature Condition.
Common causes
Common causes include Low engine oil level, Faulty oil pump, Clogged oil filter.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0298 2011 Ford Fusion Description

The diagnostic trouble code P0298 for a 2011 Ford Fusion indicates an engine oil over-temperature condition. This code is usually triggered when the engine oil temperature exceeds the specified threshold, indicating a potential issue with the engine's cooling system or lubrication system.

OBDII Code P0298 2011 Ford Fusion - Engine Oil Over Temperature Condition
P0298 2011 Ford Fusion Code - Engine Oil Over Temperature Condition

Common Causes of P0298 2011 Ford Fusion

  1. Low engine oil level
  2. Faulty oil pump
  3. Clogged oil filter
  4. Faulty thermostat
  5. Coolant system issues

Symptoms of P0298 2011 Ford Fusion

  1. Engine overheating
  2. Reduced engine performance
  3. Increased engine noise
  4. Illumination of the check engine light
  5. Engine stalling or misfiring

How to Fix P0298 2011 Ford Fusion

  1. Check engine oil level and top up if necessary
  2. Inspect and replace the oil pump if found to be faulty
  3. Replace the oil filter
  4. Test and replace the thermostat if malfunctioning
  5. Inspect and repair any coolant system issues

Cost to Fix P0298 2011 Ford Fusion

The cost estimate for repairing an engine oil over-temperature condition can vary depending on the specific cause of the issue and the extent of the repairs needed. On average, the cost for parts and labor for this type of repair can range from $200 to $800. It's important to note that the actual cost can vary based on the location, labor rates, and the specific make and model of the vehicle. It's recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate.

What does this mean?

Tech Notes for P0298 2011 Ford Fusion

On engines which are equipped with an oil temperature sensor, the Engine Control Module (ECM) reads oil temperature to determine if it is excessive. When an oil temperature sensor is not present, the ECM uses an oil algorithm to infer actual temperature. Engine shutdown strategy function is the same on vehicles with and without oil temperature sensors.

When is the Code Detected?

P0298 is set when the vehicle has been running below 1,000 rpm and less than 20 mg/stroke MFDES with EOT sensor signal reading above 110 C (230 F). The time to set the fault is dependent on EOT and Intake Air Temperature (IAT) temperatures, and can vary between approx. 15 to 45 minutes

Need more information about the P0298 2011 Ford Fusion code?

Need more information on how to fix the P0298 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0298 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0298 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P0298 in a 2011 Ford Fusion?

- Common symptoms include reduced engine performance, illuminated Check Engine Light, and potential overheating issues.

2. What does the OBDII code P0298 Engine Oil Over Temperature Condition indicate for a 2011 Ford Fusion?

- This code indicates that the engine oil temperature has exceeded safe operating levels.

3. What are the possible causes of OBDII code P0298 in a 2011 Ford Fusion?

- Causes may include low engine oil level, faulty oil temperature sensor, clogged oil passages, or a malfunctioning oil cooler.

4. How can I diagnose the OBDII code P0298 issue in my 2011 Ford Fusion?

- Diagnosis typically involves checking the engine oil level, inspecting the oil temperature sensor, and ensuring proper coolant flow through the oil cooler.

5. Can driving with OBDII code P0298 in a 2011 Ford Fusion cause further damage?

- Continuing to drive with this issue can potentially lead to engine damage due to overheating of the oil.

6. How can I repair OBDII code P0298 in my 2011 Ford Fusion?

- Repair may involve replenishing engine oil, replacing the oil temperature sensor, flushing oil passages, or repairing/replacing the oil cooler.

7. Is it safe to reset the Check Engine Light after addressing OBDII code P0298 in a 2011 Ford Fusion?

- Yes, once the underlying issue is resolved, the Check Engine Light can be reset to clear the OBDII code.

8. Are there any preventive measures to avoid OBDII code P0298 in a 2011 Ford Fusion?

- Regularly checking engine oil levels, performing routine maintenance, and ensuring proper cooling system function can help prevent this issue.

9. Can a DIY enthusiast address OBDII code P0298 in a 2011 Ford Fusion?

- Depending on the specific cause, some repairs related to this code may be tackled by DIY enthusiasts with the necessary tools and knowledge.

10. How critical is it to address OBDII code P0298 promptly in a 2011 Ford Fusion?

- It is crucial to address this code promptly to prevent potential engine damage and ensure the vehicle operates safely and efficiently.

Discuss the causes and fixes for P0298 2011 Ford Fusion OBDII Code

Submit a New Comment

Code P0298 2011 Ford Fusion comments

No comments found for this page.