P0264 GMC Code - Cylinder 2 Injector Control Circuit Low Voltage
Quick Answer
The P0264 GMC code indicates that there is a low voltage condition in the control circuit of the fuel injector for cylinder 2. Common causes include Faulty fuel injector for cylinder 2, Wiring or connection issues in the injector control circuit, ECM (Engine Control Module) failure. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0264 GMC indicates Cylinder 2 Injector Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty fuel injector for cylinder 2, Wiring or connection issues in the injector control circuit, ECM (Engine Control Module) failure.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0264 GMC Description
The P0264 GMC code indicates that there is a low voltage condition in the control circuit of the fuel injector for cylinder 2. This means that the fuel injector for cylinder 2 is not receiving enough voltage to operate properly, which can lead to issues with fuel delivery and combustion in that cylinder. When the fuel injector does not receive enough voltage, it may not open and close properly, causing a lean condition in the cylinder. This can result in poor engine performance, reduced fuel efficiency, and potential damage to the engine over time.
Common Causes of P0264 GMC
- Faulty fuel injector for cylinder 2
- Wiring or connection issues in the injector control circuit
- ECM (Engine Control Module) failure
- Corrosion or damage to the injector control circuit components
- Electrical issues such as a blown fuse or relay affecting the injector circuit
Symptoms of P0264 GMC
- Rough idling or engine misfires
- Decreased fuel efficiency
- Engine hesitation or lack of power
- Illumination of the Check Engine Light
- Increased emissions
How to Fix P0264 GMC
- Diagnose the issue by using a scan tool to check for the P0264 code and perform a visual inspection of the injector and its wiring.
- Test the fuel injector for cylinder 2 to ensure it is functioning properly.
- Check the wiring and connections in the injector control circuit for any damage or loose connections.
- Replace the fuel injector if it is found to be faulty, and repair or replace any damaged wiring or components in the circuit.
- Clear the code and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P0264 GMC
The cost of repairing a P0264 GMC code can vary depending on the specific cause of the issue. Generally, the cost of a new fuel injector can range from $100 to $300, while the labor cost for diagnosis and repair can be between $100 to $300. Including parts and labor, the total repair cost can range from $200 to $600. It's important to note that the actual cost may be higher or lower based on the factors mentioned earlier, so it's recommended to obtain quotes from local auto repair shops for a more accurate estimate.
Tech Notes for P0264 GMC
Need more information about the P0264 GMC code?
Need more information on how to fix the P0264 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0264 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P0264 2014 GMC Sierra — Cylinder 2 Injector Control Circuit Low Voltage
- P0264 2015 GMC Sierra — Cylinder 2 Injector Control Circuit Low Voltage
- P0264 2016 GMC Sierra — Cylinder 2 Injector Control Circuit Low Voltage
- P0264 2017 GMC Sierra — Cylinder 2 Injector Control Circuit Low Voltage
- P0264 2018 GMC Sierra — Cylinder 2 Injector Control Circuit Low Voltage
Frequently Asked Questions about P0264 GMC Code
What does OBDII code P0264 mean on a GMC vehicle?
P0264 indicates that the cylinder 2 injector control circuit is experiencing low voltage, which can affect engine performance.
What are the common symptoms of code P0264 on a GMC?
Symptoms include rough idling, poor engine performance, increased fuel consumption, and potential misfires.
What causes the P0264 code on a GMC vehicle?
Common causes include a faulty fuel injector, damaged wiring or connectors, a malfunctioning PCM, or low fuel pressure.
Can I drive my GMC with the P0264 code?
It’s not recommended. Driving with this code may result in decreased engine efficiency and potential damage to other components.
How is the P0264 code diagnosed on a GMC?
A mechanic will inspect the injector circuit, check wiring and connectors, test the fuel injector, and possibly scan the PCM for further issues.
How do you fix the P0264 code on a GMC vehicle?
Repairs may include replacing the faulty injector, repairing damaged wiring, cleaning connectors, or reprogramming or replacing the PCM.
Can a dirty fuel injector cause the P0264 code on a GMC?
Yes, a dirty or clogged injector can disrupt electrical signals and cause the low voltage issue.
How much does it cost to fix the P0264 code on a GMC?
Repair costs vary but typically range from $200 to $500, depending on whether the injector or wiring needs replacement.
Will clearing the code erase the P0264 problem on a GMC?
Clearing the code may temporarily remove it, but the underlying issue must be resolved to prevent it from returning.
Can a failing PCM cause the P0264 code on my GMC?
Yes, a failing PCM can mismanage the injector control circuit, leading to the P0264 code.
Discuss the causes and fixes for P0264 GMC OBDII Code
Code P0264 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.