Engine-Codes.com
Engine-Codes – Dodge – P0238 Dodge

P0238 Dodge Code - MAP Sensor Voltage Too High

Quick Answer

The P0238 code for Dodge vehicles indicates that the Manifold Absolute Pressure (MAP) sensor is detecting a voltage that is too high. Common causes include Faulty MAP sensor, Vacuum leak in the intake system, Clogged or restricted intake manifold. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0238 Dodge indicates MAP Sensor Voltage Too High.
Common causes
Common causes include Faulty MAP sensor, Vacuum leak in the intake system, Clogged or restricted intake manifold.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0238 Dodge Description

The P0238 code for Dodge vehicles indicates that the Manifold Absolute Pressure (MAP) sensor is detecting a voltage that is too high. The MAP sensor is a crucial component of the engine management system, as it measures the intake manifold pressure and sends this information to the engine control module (ECM). The ECM uses this data to calculate the air/fuel mixture and ignition timing for optimal engine performance.

OBDII Code P0238 Dodge - MAP Sensor Voltage Too High
P0238 Dodge Code - MAP Sensor Voltage Too High

Common Causes of P0238 Dodge

  1. Faulty MAP sensor
  2. Vacuum leak in the intake system
  3. Clogged or restricted intake manifold
  4. Issues with wiring or connectors related to the MAP sensor

Symptoms of P0238 Dodge

  1. Decreased fuel efficiency
  2. Rough idling
  3. Hesitation during acceleration
  4. Engine misfires
  5. Increased emissions

How to Fix P0238 Dodge

  1. Use a diagnostic scanner to confirm the P0238 code and identify the specific cause of the high voltage from the MAP sensor.
  2. Inspect the MAP sensor, wiring, and connectors for any signs of damage or corrosion. Replace any faulty components.
  3. Check for vacuum leaks in the intake system and repair as necessary.
  4. Clean or replace the intake manifold if it is clogged or restricted.
  5. Clear the code from the ECM's memory and perform a test drive to ensure the issue has been resolved.

Cost to Fix P0238 Dodge

The typical repair costs for addressing a P0238 code can range from $100 to $300, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that the diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your vehicle make and model.

Need more information about the P0238 Dodge code?

Need more information on how to fix the P0238 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0238 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0238 Dodge Code

What does the OBDII code P0238 mean for a Dodge vehicle?

P0238 indicates that the Engine Control Module (ECM) has detected a high voltage signal from the Manifold Absolute Pressure (MAP) sensor, which may affect engine performance.

What are common symptoms of the P0238 code?

Common symptoms include poor engine performance, reduced fuel economy, rough idle, and the check engine light being illuminated.

What could cause the P0238 code to trigger?

Causes may include a faulty MAP sensor, damaged wiring or connectors, a vacuum leak, or issues with the ECM.

Can I drive my Dodge with the P0238 code?

While it may be possible to drive the vehicle, it is not recommended as it can cause further engine performance issues and potential damage.

How can I diagnose the P0238 code?

Start by using an OBDII scanner to confirm the code, then visually inspect the MAP sensor and wiring for damage, check for vacuum leaks, and test the sensor's voltage output.

What repairs are commonly needed for the P0238 code?

Repairs may involve replacing the MAP sensor, repairing or replacing damaged wiring, fixing vacuum leaks, or reprogramming or replacing the ECM.

Is the P0238 code serious?

Yes, it can affect engine performance and fuel efficiency, so it should be addressed promptly to avoid further issues.

How can I prevent the P0238 code from occurring?

Regular maintenance, including checking and replacing worn sensors, ensuring proper vacuum system integrity, and addressing any electrical issues promptly can help prevent this code.

Will clearing the P0238 code fix the problem?

Clearing the code may temporarily turn off the check engine light, but the underlying issue needs to be resolved to prevent the code from reappearing.

Discuss the causes and fixes for P0238 Dodge OBDII Code

Submit a New Comment

Code P0238 Dodge comments

No comments found for this page.