P0231 2018 Chevrolet Silverado Code - Fuel Pump Control Circuit Low Voltage
Quick Answer
The P0231 diagnostic trouble code (DTC) in a 2018 Chevrolet Silverado indicates that there is a low voltage condition in the fuel pump control circuit. Common causes include Faulty fuel pump relay, Damaged fuel pump control module, Wiring issues in the fuel pump circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0231 2018 Chevrolet Silverado indicates Fuel Pump Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty fuel pump relay, Damaged fuel pump control module, Wiring issues in the fuel pump circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0231 2018 Chevrolet Silverado Description
The P0231 diagnostic trouble code (DTC) in a 2018 Chevrolet Silverado indicates that there is a low voltage condition in the fuel pump control circuit. This means that the powertrain control module (PCM) has detected a voltage level below the specified range for the fuel pump control circuit. The fuel pump control circuit is responsible for regulating the fuel pump's operation, ensuring that the correct amount of fuel is delivered to the engine for optimal performance.
Common Causes of P0231 2018 Chevrolet Silverado
- Faulty fuel pump relay
- Damaged fuel pump control module
- Wiring issues in the fuel pump circuit
- PCM malfunction
- Electrical system issues
Symptoms of P0231 2018 Chevrolet Silverado
- Engine stalling
- Hesitation during acceleration
- Rough idling
- Difficulty starting the vehicle
- Poor engine performance
How to Fix P0231 2018 Chevrolet Silverado
- Begin by conducting a thorough inspection of the fuel pump control circuit, including the relay, control module, and wiring.
- Test the fuel pump relay and control module for proper functionality and replace if necessary.
- Check the wiring in the fuel pump circuit for any damage or corrosion, repairing or replacing as needed.
- Clear the DTC from the PCM memory using a diagnostic scan tool and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, further diagnosis may be required to pinpoint the exact cause of the low voltage condition.
Cost to Fix P0231 2018 Chevrolet Silverado
The typical repair costs for addressing a P0231 code in a 2018 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, the cost of parts such as a fuel pump relay or control module can range from $50 to $200, while labor costs can range from $100 to $300. Overall, the total repair cost for this issue may fall between $150 and $500. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location and vehicle specifics.
Need more information about the P0231 2018 Chevrolet Silverado code?
Need more information on how to fix the P0231 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0231 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0231 2018 Chevrolet Silverado Code
1. What does the OBDII code P0231 mean on a 2018 Chevrolet Silverado?
P0231 indicates a low-voltage condition in the fuel pump control circuit, which may affect the operation of the fuel pump.
2. What are the common symptoms of code P0231 in a 2018 Chevrolet Silverado?
Symptoms include difficulty starting, engine stalling, poor performance, or the engine not starting at all.
3. What causes the P0231 code in a 2018 Chevrolet Silverado?
Common causes include a faulty fuel pump relay, damaged wiring or connectors in the fuel pump circuit, a failing fuel pump, or a malfunctioning powertrain control module (PCM).
4. Can a bad fuel pump cause the P0231 code to appear?
Yes, a failing or faulty fuel pump can cause low voltage in the circuit and trigger the P0231 code.
5. How do you diagnose the P0231 code on a 2018 Chevrolet Silverado?
Diagnosis involves checking the fuel pump relay, inspecting the wiring and connectors for damage or corrosion, and testing the fuel pump for proper operation.
6. Is it safe to drive a 2018 Chevrolet Silverado with a P0231 code?
Driving with this code is not recommended, as it may result in the engine stalling or failing to start, creating a safety risk.
7. How can the P0231 code be fixed in a 2018 Chevrolet Silverado?
Repairs may involve replacing the fuel pump relay, repairing or replacing damaged wiring, or replacing the fuel pump itself.
8. Can a loose or corroded connector trigger the P0231 code?
Yes, a loose or corroded connector in the fuel pump circuit can disrupt the voltage and trigger this code.
9. How much does it typically cost to fix the P0231 code on a 2018 Chevrolet Silverado?
Repair costs vary depending on the cause, but replacing a fuel pump relay or repairing wiring typically costs less than replacing the fuel pump, which can range from $500 to $1000.
10. Can a P0231 code clear itself after repairs?
The code may clear itself after the issue is resolved, but in some cases, the code may need to be manually cleared using an OBDII scanner.
Discuss the causes and fixes for P0231 2018 Chevrolet Silverado OBDII Code
Code P0231 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.