P0231 2014 Chevrolet Silverado Code - Fuel Pump Control Circuit Low Voltage
Quick Answer
The P0231 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that there is a low voltage condition in the fuel pump control circuit. Common causes include Faulty fuel pump relay, Damaged fuel pump control module, Wiring issues in the fuel pump circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0231 2014 Chevrolet Silverado indicates Fuel Pump Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty fuel pump relay, Damaged fuel pump control module, Wiring issues in the fuel pump circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0231 2014 Chevrolet Silverado Description
The P0231 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that there is a low voltage condition in the fuel pump control circuit. This means that the powertrain control module (PCM) has detected a voltage level below the specified range for the fuel pump control circuit. The fuel pump control circuit is responsible for regulating the fuel pump's operation, ensuring that the correct amount of fuel is delivered to the engine for optimal performance.
Common Causes of P0231 2014 Chevrolet Silverado
- Faulty fuel pump relay
- Damaged fuel pump control module
- Wiring issues in the fuel pump circuit
- Malfunctioning fuel pump
- Electrical system issues
Symptoms of P0231 2014 Chevrolet Silverado
- Engine misfires or runs rough
- Difficulty starting the vehicle
- Stalling or hesitation during acceleration
- Reduced fuel efficiency
- Illumination of the check engine light
How to Fix P0231 2014 Chevrolet Silverado
- Begin by performing a thorough inspection of the fuel pump control circuit, checking for any visible damage or loose connections.
- Test the fuel pump relay and control module to determine if they are functioning properly. Replace any components that are faulty.
- Inspect the wiring in the fuel pump circuit for any signs of damage or corrosion. Repair or replace any damaged wiring.
- Test the fuel pump itself to ensure that it is operating within the specified voltage range. Replace the fuel pump if necessary.
- Clear the DTC with a scan tool and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P0231 2014 Chevrolet Silverado
The typical repair costs for addressing a P0231 code on a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, you can expect to pay anywhere from $200 to $500 for parts and labor. Keep in mind that the cost of diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check with local shops for a more accurate estimate.
Need more information about the P0231 2014 Chevrolet Silverado code?
Need more information on how to fix the P0231 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0231 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0231 2014 Chevrolet Silverado Code
1. What does the OBDII code P0231 mean on a 2014 Chevrolet Silverado?
The P0231 code indicates a "Fuel Pump Control Circuit Low Voltage," meaning the power supply to the fuel pump control circuit is lower than expected.
2. What are the common symptoms of the P0231 code?
Symptoms may include the engine stalling, difficulty starting, reduced fuel efficiency, or the vehicle not starting at all.
3. What causes the P0231 code to appear on a 2014 Chevrolet Silverado?
Possible causes include a faulty fuel pump relay, damaged wiring or connectors in the fuel pump circuit, a failing fuel pump, or issues with the powertrain control module (PCM).
4. Can a bad fuel pump trigger the P0231 code?
Yes, a failing or damaged fuel pump can cause low voltage in the fuel pump control circuit, triggering the P0231 code.
5. How do I diagnose the P0231 code on my Silverado?
Start by checking the fuel pump relay, inspecting wiring and connectors for damage or corrosion, and testing the fuel pump for proper operation. Use a multimeter to measure voltage in the circuit.
6. Is the P0231 code serious?
Yes, it is serious because it can lead to engine performance issues or prevent the vehicle from starting. Address it promptly to avoid further complications.
7. How can I fix the P0231 code on my 2014 Silverado?
Repairs may involve replacing a faulty fuel pump relay, repairing or replacing damaged wiring, cleaning corroded connectors, or replacing the fuel pump if necessary.
8. Can I drive my Silverado with the P0231 code?
Driving with the P0231 code is risky, as it can cause stalling or prevent the truck from starting. It’s best to resolve the issue as soon as possible.
9. Could a bad PCM cause the P0231 code?
While rare, a malfunctioning PCM can cause the P0231 code if it fails to properly regulate the fuel pump control circuit.
10. What tools are needed to troubleshoot the P0231 code?
You’ll need an OBDII scanner, a multimeter, and basic tools for inspecting and replacing relays, wiring, and connectors.
Discuss the causes and fixes for P0231 2014 Chevrolet Silverado OBDII Code
Code P0231 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.