Engine-CodesAcura – P0223 Acura

P0223 Acura Code - Throttle Position Sensor 'B' Circuit High Voltage

Quick Answer

The P0223 code for Acura vehicles indicates a problem with the Throttle Position Sensor (TPS) 'B' circuit, specifically that the voltage is reading higher than the expected range. Common causes include Faulty Throttle Position Sensor, Wiring issues or shorts in the TPS circuit, Corrosion or poor connections in the sensor wiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0223 Acura indicates Throttle Position Sensor 'B' Circuit High Voltage.
Common causes
Common causes include Faulty Throttle Position Sensor, Wiring issues or shorts in the TPS circuit, Corrosion or poor connections in the sensor wiring.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0223 Acura Description

The P0223 code for Acura vehicles indicates a problem with the Throttle Position Sensor (TPS) 'B' circuit, specifically that the voltage is reading higher than the expected range. The TPS is a crucial component of the engine management system, as it monitors the position of the throttle valve and sends this information to the Engine Control Module (ECM). The ECM uses this data to determine the appropriate air-fuel mixture for combustion, as well as to adjust the engine's performance based on driver input.

OBDII Code P0223 Acura - Throttle Position Sensor 'B' Circuit High Voltage
P0223 Acura Code - Throttle Position Sensor 'B' Circuit High Voltage

Common Causes of P0223 Acura

  1. Faulty Throttle Position Sensor
  2. Wiring issues or shorts in the TPS circuit
  3. Corrosion or poor connections in the sensor wiring
  4. ECM software or hardware issues
  5. Mechanical problems with the throttle body

Symptoms of P0223 Acura

  1. Rough idling or stalling
  2. Lack of power or acceleration
  3. Poor fuel efficiency
  4. Check Engine Light illuminated
  5. Limp mode activation

How to Fix P0223 Acura

  1. Begin by connecting a diagnostic scanner to the vehicle's OBD-II port to retrieve the specific fault code and confirm the issue.
  2. Inspect the TPS wiring and connections for any signs of damage, corrosion, or loose connections. Repair or replace any damaged wiring as needed.
  3. Test the Throttle Position Sensor using a multimeter to check for proper voltage output. Replace the sensor if it is found to be faulty.
  4. Clear the fault code from the ECM's memory using the diagnostic scanner and test drive the vehicle to ensure the issue has been resolved.
  5. If the problem persists, further diagnosis may be required to identify any underlying issues with the ECM or throttle body.

Cost to Fix P0223 Acura

The cost of repairing a Throttle Position Sensor 'B' circuit high voltage issue can vary depending on the specific cause of the problem and the labor rates in your area. In general, replacing a faulty TPS can range from $50 to $200, while addressing wiring issues or ECM problems may increase the total cost. Including parts and labor, the total repair cost for this issue could range from $150 to $500. It is recommended to consult with a qualified mechanic or dealership for a more accurate estimate based on your vehicle's make and model. Labor rates typically range from $80 to $150 per hour, but can vary based on location and shop rates.

Need more information about the P0223 Acura code?

Need more information on how to fix the P0223 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0223 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0223 Acura Code

What does the OBDII code P0223 mean on an Acura?

Code P0223 indicates that the Throttle Position Sensor (TPS) 'B' circuit is experiencing a high voltage issue, meaning the sensor is sending a signal that exceeds the expected range to the engine control module (ECM).

What are the common symptoms of code P0223 in an Acura?

Symptoms may include poor acceleration, hesitation, reduced engine power (limp mode), erratic throttle response, or the illumination of the check engine light.

What causes the P0223 code in an Acura?

Common causes include a faulty Throttle Position Sensor (TPS), damaged wiring or connectors in the TPS circuit, a malfunctioning throttle body, or issues with the ECM.

Can a dirty throttle body cause code P0223?

Yes, a dirty or malfunctioning throttle body can sometimes lead to high voltage readings from the TPS, triggering the P0223 code.

How do you diagnose code P0223 in an Acura?

Diagnosis involves using a scan tool to confirm the code, inspecting the TPS and related wiring for damage or corrosion, testing the sensor’s voltage output, and checking the throttle body for issues.

Can I drive my Acura with the P0223 code?

Driving with this code is not recommended, as it can lead to reduced power, unsafe driving conditions, and potential damage to the throttle system or engine.

How is code P0223 fixed on an Acura?

Repairs may include replacing the Throttle Position Sensor, repairing or replacing damaged wiring, cleaning or replacing the throttle body, or reprogramming/updating the ECM if necessary.

How much does it cost to fix code P0223 on an Acura?

The cost depends on the exact issue but typically ranges from $100 to $300 for a sensor replacement and higher if the throttle body or ECM needs repair.

Can a bad accelerator pedal position sensor cause code P0223?

No, this code specifically relates to the Throttle Position Sensor 'B' circuit, not the accelerator pedal position sensor.

Will disconnecting the battery clear the P0223 code?

Disconnecting the battery may temporarily clear the code, but it will not fix the underlying problem, and the code is likely to return.

Discuss the causes and fixes for P0223 Acura OBDII Code

Code P0223 Acura comments

No comments found for this page.