P0223 2017 Honda CR-V Code - Throttle Position Sensor 'B' Circuit High Voltage
Quick Answer
The P0223 diagnostic trouble code (DTC) in a 2017 Honda CR-V indicates that the Engine Control Module (ECM) has detected a high voltage condition in the throttle position sensor 'B' circuit. Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0223 2017 Honda CR-V indicates Throttle Position Sensor 'B' Circuit High Voltage.
- Common causes
- Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0223 2017 Honda CR-V Description
The P0223 diagnostic trouble code (DTC) in a 2017 Honda CR-V indicates that the Engine Control Module (ECM) has detected a high voltage condition in the throttle position sensor 'B' circuit. The throttle position sensor (TPS) is a crucial component that monitors the position of the throttle valve and sends this information to the ECM. The 'B' circuit refers to a specific part of the TPS wiring or sensor itself.
Common Causes of P0223 2017 Honda CR-V
- Faulty throttle position sensor
- Damaged wiring or connectors in the TPS circuit
- Malfunctioning ECM
- Issues with the throttle body
- Corrosion or contamination in the TPS circuit
Symptoms of P0223 2017 Honda CR-V
- Rough idling or unstable engine RPM
- Hesitation or lack of response when accelerating
- Engine stalling or shutting off unexpectedly
- Reduced fuel efficiency
- Illumination of the Check Engine Light
How to Fix P0223 2017 Honda CR-V
- Begin by conducting a thorough inspection of the throttle position sensor, wiring, and connectors for any visible damage or corrosion.
- Test the throttle position sensor using a multimeter to check for proper voltage output.
- If the sensor is faulty, replace it with a new OEM part and ensure proper calibration.
- Check and repair any damaged wiring or connectors in the TPS circuit.
- Clear the DTC and perform a test drive to verify that the issue has been resolved.
Cost to Fix P0223 2017 Honda CR-V
The typical repair costs for addressing a P0223 code in a 2017 Honda CR-V can vary depending on the specific cause of the issue. On average, the cost of replacing a throttle position sensor can range from $100 to $300, including parts and labor. Additional costs may apply if there are wiring or ECM-related issues that need to be addressed. It's recommended to consult with a qualified mechanic or dealership for a more accurate estimate based on the specific diagnosis and repair needed. Labor rates at auto repair shops can vary, typically ranging between $80 and $150 per hour.
Need more information about the P0223 2017 Honda CR-V code?
Need more information on how to fix the P0223 2017 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0223 2017 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0223 2017 Honda CR-V Code
1. What does the OBDII code P0223 mean on a 2017 Honda CR-V?
P0223 indicates that the Engine Control Module (ECM) has detected a high voltage signal from the Throttle Position Sensor (TPS) 'B' circuit.
2. What are the common symptoms of code P0223 in a 2017 Honda CR-V?
Symptoms may include poor acceleration, engine stalling, rough idling, reduced fuel efficiency, or the vehicle entering "limp mode."
3. What causes the P0223 code to appear on a 2017 Honda CR-V?
Common causes include a faulty throttle position sensor, damaged wiring or connectors in the TPS circuit, or issues with the ECM.
4. Can I drive my 2017 Honda CR-V with the P0223 code?
It’s not recommended, as the vehicle may experience reduced performance or enter limp mode, which could pose safety risks.
5. How do I diagnose the P0223 code on my 2017 Honda CR-V?
Use an OBDII scanner to confirm the code, inspect the TPS wiring and connectors for damage, and test the TPS voltage output with a multimeter.
6. How can I fix the P0223 code on a 2017 Honda CR-V?
Repairs may include replacing the throttle position sensor, repairing or replacing damaged wiring, or updating/reprogramming the ECM if needed.
7. How much does it cost to repair a P0223 code on a 2017 Honda CR-V?
Replacing the throttle position sensor typically costs $150–$300, including parts and labor, while wiring repairs or ECM updates may vary depending on the issue.
8. Is the P0223 code related to other throttle or pedal sensor issues?
Yes, it could be related to other throttle/pedal position sensor codes if there’s a broader issue with the throttle control system.
9. Can a dirty throttle body cause the P0223 code on a 2017 Honda CR-V?
A dirty throttle body is unlikely to directly cause this code but may contribute to related throttle performance issues.
10. Will clearing the P0223 code without repairs solve the issue?
Clearing the code may turn off the Check Engine Light temporarily, but the problem will likely return until the underlying issue is resolved.
Discuss the causes and fixes for P0223 2017 Honda CR-V OBDII Code
Code P0223 2017 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.