Engine-Codes.com
Engine-Codes – Nissan – P0223 2013 Nissan Rogue

P0223 2013 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input

Quick Answer

The P0223 diagnostic trouble code (DTC) for a 2013 Nissan Rogue indicates a problem with the Throttle Position Sensor 1 Circuit High Input. Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Corrosion or poor connections in the TPS circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0223 2013 Nissan Rogue indicates Throttle Position Sensor 1 Circuit High Input.
Common causes
Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Corrosion or poor connections in the TPS circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0223 2013 Nissan Rogue Description

The P0223 diagnostic trouble code (DTC) for a 2013 Nissan Rogue indicates a problem with the Throttle Position Sensor 1 Circuit High Input. The throttle position sensor (TPS) is a crucial component of the vehicle's electronic throttle control system, responsible for monitoring the position of the throttle pedal and sending this information to the engine control module (ECM). The ECM uses this data to determine the appropriate fuel injection and ignition timing for optimal engine performance.

OBDII Code P0223 2013 Nissan Rogue - Throttle Position Sensor 1 Circuit High Input
P0223 2013 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input

Common Causes of P0223 2013 Nissan Rogue

  1. Faulty throttle position sensor
  2. Damaged wiring or connectors in the TPS circuit
  3. Corrosion or poor connections in the TPS circuit
  4. Issues with the ECM or related control modules
  5. Environmental factors such as moisture or debris affecting the TPS

Symptoms of P0223 2013 Nissan Rogue

  1. Erratic idling or engine surging
  2. Stalling or difficulty starting the engine
  3. Hesitation or lack of response when accelerating
  4. Reduced fuel efficiency
  5. Illumination of the Check Engine Light

How to Fix P0223 2013 Nissan Rogue

  1. Begin by diagnosing the specific cause of the P0223 code using a scan tool to monitor TPS data and check for any related trouble codes.
  2. Inspect the throttle position sensor, wiring, and connectors for any signs of damage, corrosion, or poor connections. Replace or repair as necessary.
  3. Test the TPS circuit for proper voltage and resistance values to ensure accurate sensor readings.
  4. Clear the DTC from the ECM memory and perform a test drive to verify that the issue has been resolved.
  5. If the problem persists, further diagnostics may be required to pinpoint the exact cause, such as testing the ECM or related components for faults.

Cost to Fix P0223 2013 Nissan Rogue

The typical repair costs for addressing a P0223 code on a 2013 Nissan Rogue can vary depending on the specific cause of the issue and the extent of repairs needed. In general, replacing a faulty throttle position sensor or repairing damaged wiring/connectors can range from $100 to $300 for parts, with additional labor costs of $100 to $200. However, if the issue is more complex and requires ECM replacement or extensive diagnostics, the total repair costs could exceed $500. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local providers for a more accurate estimate.

What does this mean?

Tech Notes for P0223 2013 Nissan Rogue

The throttle position sensor (TPS) is built into the throttle body.

When is the Code Detected?

An excessively high voltage from the Throttle Position Sensor (TPS) 2 is sent to Engine Control Module (ECM).

Need more information about the P0223 2013 Nissan Rogue code?

Need more information on how to fix the P0223 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0223 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0223 2013 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0223 in a 2013 Nissan Rogue?

The common symptoms include issues like reduced engine power, hesitation or stalling when accelerating, and the vehicle going into "limp mode."

2. What does the OBDII code P0223 in a 2013 Nissan Rogue indicate?

OBDII code P0223 indicates a Throttle Position Sensor 1 Circuit High Input problem, meaning there is a higher than expected voltage signal detected in the throttle position sensor circuit.

3. What are the possible causes of OBDII code P0223 in a 2013 Nissan Rogue?

Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, a defective engine control module, or issues with the throttle body.

4. How can I diagnose the OBDII code P0223 in my 2013 Nissan Rogue?

Diagnosing this code typically involves using a scan tool to retrieve the code, checking the throttle position sensor's wiring and connections, testing the sensor's voltage output, and inspecting the throttle body for any issues.

5. Can I continue driving my 2013 Nissan Rogue with OBDII code P0223?

It is not recommended to drive the vehicle with this code present as it can lead to performance issues and potentially cause further damage to the engine or related components.

6. How can I repair OBDII code P0223 in my 2013 Nissan Rogue?

Repairing this code usually involves replacing the throttle position sensor if it is found to be faulty, repairing any damaged wiring or connectors, or addressing any issues with the throttle body or engine control module.

7. Is it possible to reset the OBDII code P0223 in a 2013 Nissan Rogue without fixing the underlying issue?

Resetting the code without addressing the underlying problem will only temporarily clear the error code, and it is likely to reappear once the issue persists.

8. How much does it typically cost to repair OBDII code P0223 in a 2013 Nissan Rogue?

The cost of repairing this code can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

9. Can a DIY enthusiast fix OBDII code P0223 in a 2013 Nissan Rogue?

While some experienced DIY enthusiasts may be able to diagnose and replace the throttle position sensor themselves, it is recommended to seek professional help for a proper diagnosis and repair.

10. How long does it take to repair OBDII code P0223 in a 2013 Nissan Rogue?

The repair time can vary based on the exact cause of the issue and the technician's experience, but it typically takes around 1-2 hours to diagnose and replace the throttle position sensor or address related issues.

Discuss the causes and fixes for P0223 2013 Nissan Rogue OBDII Code

Submit a New Comment

Code P0223 2013 Nissan Rogue comments

No comments found for this page.