Engine-Codes.com
Engine-Codes – Nissan – P0223 2012 Nissan Rogue

P0223 2012 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input

Quick Answer

The P0223 diagnostic trouble code (DTC) for a 2012 Nissan Rogue indicates a problem with the Throttle Position Sensor 1 Circuit High Input. Common causes include Faulty throttle position sensor, Damaged or corroded wiring connections, Issues with the engine control module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0223 2012 Nissan Rogue indicates Throttle Position Sensor 1 Circuit High Input.
Common causes
Common causes include Faulty throttle position sensor, Damaged or corroded wiring connections, Issues with the engine control module (ECM).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0223 2012 Nissan Rogue Description

The P0223 diagnostic trouble code (DTC) for a 2012 Nissan Rogue indicates a problem with the Throttle Position Sensor 1 Circuit High Input. The throttle position sensor (TPS) is a crucial component of the vehicle's electronic throttle control system, responsible for monitoring the position of the throttle pedal and sending this information to the engine control module (ECM). The ECM uses this data to determine the appropriate amount of air and fuel to deliver to the engine for optimal performance.

OBDII Code P0223 2012 Nissan Rogue - Throttle Position Sensor 1 Circuit High Input
P0223 2012 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input

Common Causes of P0223 2012 Nissan Rogue

  1. Faulty throttle position sensor
  2. Damaged or corroded wiring connections
  3. Issues with the engine control module (ECM)
  4. Short circuit in the wiring harness
  5. Faulty throttle body assembly

Symptoms of P0223 2012 Nissan Rogue

  1. Reduced engine power or acceleration
  2. Engine stalling or hesitation
  3. Rough idling or surging
  4. Check Engine Light illuminated on the dashboard
  5. Difficulty shifting gears in an automatic transmission

How to Fix P0223 2012 Nissan Rogue

  1. Begin by diagnosing the issue using a scan tool to confirm the P0223 code and identify the specific cause.
  2. Inspect the throttle position sensor and wiring connections for any visible damage or corrosion. Replace the sensor if necessary.
  3. Check the wiring harness for any signs of a short circuit or loose connections. Repair or replace the wiring as needed.
  4. Test the ECM for proper functionality and replace if deemed faulty.
  5. Clear the DTC and perform a test drive to ensure the issue has been resolved.

Cost to Fix P0223 2012 Nissan Rogue

The typical repair costs for addressing a P0223 code on a 2012 Nissan Rogue can vary depending on the specific cause of the issue. In general, replacing a throttle position sensor can range from $100 to $300, including parts and labor. If additional components such as the ECM or wiring harness need to be replaced, the total repair cost could increase accordingly. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.

What does this mean?

Tech Notes for P0223 2012 Nissan Rogue

The throttle position sensor (TPS) is built into the throttle body.

When is the Code Detected?

An excessively high voltage from the Throttle Position Sensor (TPS) 2 is sent to Engine Control Module (ECM).

Need more information about the P0223 2012 Nissan Rogue code?

Need more information on how to fix the P0223 2012 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0223 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0223 2012 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0223 on a 2012 Nissan Rogue?

- Common symptoms include issues with acceleration, lack of power, engine stalling, and the vehicle going into limp mode.

2. What does the OBDII code P0223 "Throttle Position Sensor 1 Circuit High Input" mean on a 2012 Nissan Rogue?

- This code indicates that the Engine Control Module (ECM) has detected a high voltage input signal from the throttle position sensor.

3. What are the possible causes of OBDII code P0223 on a 2012 Nissan Rogue?

- Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or issues with the ECM.

4. How can I diagnose the OBDII code P0223 on my 2012 Nissan Rogue?

- Diagnosis typically involves checking the throttle position sensor for proper voltage output, inspecting the wiring and connectors for damage, and using a scan tool to read live data from the sensor.

5. Can I continue driving my 2012 Nissan Rogue with OBDII code P0223?

- It is not recommended to drive the vehicle with this code present, as it can lead to performance issues and potential safety concerns. It's best to address the underlying problem promptly.

6. How can I repair OBDII code P0223 on my 2012 Nissan Rogue?

- Repair often involves replacing the throttle position sensor, repairing any damaged wiring or connectors, and clearing the code with a scan tool.

7. Will resetting the OBDII code P0223 on my 2012 Nissan Rogue make it go away permanently?

- Resetting the code may temporarily clear it, but if the underlying issue is not addressed, the code is likely to return.

8. Can a DIY enthusiast fix OBDII code P0223 on a 2012 Nissan Rogue?

- Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to replace the throttle position sensor or repair wiring themselves. However, professional diagnosis is recommended for accuracy.

9. How much does it cost to repair OBDII code P0223 on a 2012 Nissan Rogue?

- The cost of repair can vary depending on the root cause of the issue, but it typically involves the cost of a new throttle position sensor and labor charges if done at a repair shop.

10. Is OBDII code P0223 a common issue in 2012 Nissan Rogues?

- While not extremely common, issues with the throttle position sensor leading to code P0223 can occur in 2012 Nissan Rogues, especially as the vehicle ages.

Discuss the causes and fixes for P0223 2012 Nissan Rogue OBDII Code

Submit a New Comment

Code P0223 2012 Nissan Rogue comments

No comments found for this page.