Engine-Codes.com
Engine-Codes – Nissan – P0223 2011 Nissan Rogue

P0223 2011 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input

Quick Answer

The P0223 diagnostic trouble code (DTC) for a 2011 Nissan Rogue indicates a problem with the Throttle Position Sensor 1 Circuit High Input. Common causes include Faulty throttle position sensor, Damaged or corroded wiring in the TPS circuit, Loose or poor connections in the TPS circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0223 2011 Nissan Rogue indicates Throttle Position Sensor 1 Circuit High Input.
Common causes
Common causes include Faulty throttle position sensor, Damaged or corroded wiring in the TPS circuit, Loose or poor connections in the TPS circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0223 2011 Nissan Rogue Description

The P0223 diagnostic trouble code (DTC) for a 2011 Nissan Rogue indicates a problem with the Throttle Position Sensor 1 Circuit High Input. The throttle position sensor (TPS) is a crucial component of the vehicle's electronic throttle control system, responsible for monitoring the position of the throttle pedal and sending this information to the engine control module (ECM). The ECM uses this data to determine the appropriate fuel delivery and ignition timing for optimal engine performance.

OBDII Code P0223 2011 Nissan Rogue - Throttle Position Sensor 1 Circuit High Input
P0223 2011 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input

Common Causes of P0223 2011 Nissan Rogue

  1. Faulty throttle position sensor
  2. Damaged or corroded wiring in the TPS circuit
  3. Loose or poor connections in the TPS circuit
  4. Issues with the engine control module (ECM)
  5. Environmental factors such as moisture or debris affecting the TPS

Symptoms of P0223 2011 Nissan Rogue

  1. Reduced engine power
  2. Difficulty accelerating
  3. Engine stalling or surging
  4. Poor fuel efficiency
  5. Illumination of the Check Engine Light

How to Fix P0223 2011 Nissan Rogue

  1. Begin by diagnosing the specific cause of the high input signal from the TPS using a diagnostic scanner and multimeter.
  2. Inspect the TPS wiring and connectors for any damage, corrosion, or loose connections. Repair or replace as needed.
  3. Test the TPS itself for proper operation and replace if found to be faulty.
  4. Clear the DTC from the ECM memory using the diagnostic scanner and perform a test drive to ensure the issue has been resolved.
  5. If the problem persists, further diagnostics may be required to identify any underlying issues with the ECM or other related components.

Cost to Fix P0223 2011 Nissan Rogue

The typical repair costs for addressing a P0223 code on a 2011 Nissan Rogue can vary depending on the specific cause of the issue. In general, replacing a faulty throttle position sensor can cost between $100 and $200, including parts and labor. However, if additional repairs or diagnostics are needed, the total cost could increase. It is advisable to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on the specific circumstances of your vehicle. Keep in mind that labor rates at auto repair shops can vary, so it's essential to consider these factors when budgeting for the repair.

What does this mean?

Tech Notes for P0223 2011 Nissan Rogue

The throttle position sensor (TPS) is built into the throttle body.

When is the Code Detected?

An excessively high voltage from the Throttle Position Sensor (TPS) 2 is sent to Engine Control Module (ECM).

Need more information about the P0223 2011 Nissan Rogue code?

Need more information on how to fix the P0223 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0223 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0223 2011 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0223 in a 2011 Nissan Rogue?

When the throttle position sensor 1 circuit registers high input, you may experience issues like poor acceleration, reduced engine power, rough idling, and potentially even stalling.

2. What does the OBDII code P0223 indicate in a 2011 Nissan Rogue?

Code P0223 specifically points to a problem with the Throttle Position Sensor 1 Circuit High Input in the vehicle's engine control module.

3. What are the possible causes of OBDII code P0223 in a 2011 Nissan Rogue?

Common causes of the Throttle Position Sensor 1 Circuit High Input error include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module itself.

4. How can I diagnose the Throttle Position Sensor 1 Circuit High Input issue in my 2011 Nissan Rogue?

To diagnose the problem, you can use an OBDII scanner to retrieve the specific error code. Additionally, inspect the throttle position sensor and its wiring for any signs of damage or loose connections.

5. Can I continue driving my 2011 Nissan Rogue with OBDII code P0223?

It is not recommended to drive your vehicle with code P0223 as it can lead to further damage and potentially unsafe driving conditions. It's best to address the issue promptly.

6. How can I repair OBDII code P0223 in my 2011 Nissan Rogue?

Repairing code P0223 typically involves replacing the throttle position sensor if it's faulty, repairing any damaged wiring or connectors, and resetting the error code with an OBDII scanner.

7. Is it possible to reset OBDII code P0223 in a 2011 Nissan Rogue without repairing the issue?

While you can clear the error code temporarily, it is crucial to address the root cause of the problem to prevent the code from reappearing and potentially causing more severe issues.

8. Can a DIY enthusiast fix OBDII code P0223 in a 2011 Nissan Rogue?

If you have experience working on automotive electrical systems and access to the necessary tools, you may be able to replace the throttle position sensor or repair wiring yourself. However, professional assistance is recommended for accurate diagnosis and repair.

9. How much does it typically cost to repair OBDII code P0223 in a 2011 Nissan Rogue?

The cost of repairing code P0223 can vary depending on the exact cause of the issue, the labor rates in your area, and whether you choose to replace the throttle position sensor yourself or have it done at a repair shop. It's advisable to obtain quotes from local mechanics for a more accurate estimate.

10. Will fixing OBDII code P0223 improve the performance and fuel efficiency of my 2011 Nissan Rogue?

Yes, addressing the Throttle Position Sensor 1 Circuit High Input issue should lead to improved engine performance, smoother acceleration, and potentially better fuel efficiency in your Nissan Rogue.

Discuss the causes and fixes for P0223 2011 Nissan Rogue OBDII Code

Submit a New Comment

Code P0223 2011 Nissan Rogue comments

No comments found for this page.