Engine-Codes.com
Engine-Codes – Nissan – P0223 2009 Nissan Rogue

P0223 2009 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input

Quick Answer

The P0223 diagnostic trouble code (DTC) for a 2009 Nissan Rogue indicates an issue with the Throttle Position Sensor 1 Circuit High Input. Common causes include Faulty throttle position sensor, Damaged or corroded wiring in the TPS circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0223 2009 Nissan Rogue indicates Throttle Position Sensor 1 Circuit High Input.
Common causes
Common causes include Faulty throttle position sensor, Damaged or corroded wiring in the TPS circuit, ECM malfunction.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 07, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0223 2009 Nissan Rogue Description

The P0223 diagnostic trouble code (DTC) for a 2009 Nissan Rogue indicates an issue with the Throttle Position Sensor 1 Circuit High Input. The throttle position sensor (TPS) is a crucial component of the electronic throttle control system, which helps regulate the engine's air intake based on the driver's input. The TPS monitors the position of the throttle valve and sends this information to the engine control module (ECM), allowing it to adjust fuel delivery and ignition timing accordingly.

OBDII Code P0223 2009 Nissan Rogue - Throttle Position Sensor 1 Circuit High Input
P0223 2009 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input

Common Causes of P0223 2009 Nissan Rogue

  1. Faulty throttle position sensor
  2. Damaged or corroded wiring in the TPS circuit
  3. ECM malfunction
  4. Poor electrical connections
  5. Environmental factors such as moisture or debris affecting the sensor

Symptoms of P0223 2009 Nissan Rogue

  1. Check engine light illuminated
  2. Engine hesitation or surging
  3. Reduced fuel efficiency
  4. Rough idling or stalling
  5. Loss of power or acceleration

How to Fix P0223 2009 Nissan Rogue

  1. Begin by performing a thorough inspection of the TPS wiring and connections to check for any visible damage or corrosion. Repair or replace any damaged wires or connectors.
  2. Test the TPS using a multimeter to ensure it is functioning correctly. If the TPS is faulty, replace it with a new one following the manufacturer's guidelines.
  3. Clear the DTC with a scan tool and test drive the vehicle to verify that the issue has been resolved.
  4. If the problem persists, further diagnosis may be necessary to check for any underlying ECM issues or other potential causes.
  5. Once the repair is completed, perform a final check to ensure the check engine light is no longer illuminated and that the vehicle is running smoothly.

Cost to Fix P0223 2009 Nissan Rogue

The cost of repairing a P0223 code on a 2009 Nissan Rogue can vary depending on the specific cause of the issue and the labor rates in your area. Typically, replacing a throttle position sensor can range from $100 to $300, including parts and labor. Additional costs may apply if other components need to be replaced or if further diagnosis is required. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on your vehicle's specific needs.

What does this mean?

Tech Notes for P0223 2009 Nissan Rogue

The throttle position sensor (TPS) is built into the throttle body.

When is the Code Detected?

An excessively high voltage from the Throttle Position Sensor (TPS) 2 is sent to Engine Control Module (ECM).

Need more information about the P0223 2009 Nissan Rogue code?

Need more information on how to fix the P0223 2009 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0223 2009 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0223 2009 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0223 in a 2009 Nissan Rogue?

The common symptoms of code P0223 in a 2009 Nissan Rogue include issues with the vehicle's acceleration, reduced engine power, and the illumination of the Check Engine Light.

2. What does the OBDII code P0223 indicate in a 2009 Nissan Rogue?

OBDII code P0223 in a 2009 Nissan Rogue indicates a Throttle Position Sensor 1 Circuit High Input issue, meaning that the signal sent by the throttle position sensor is higher than expected.

3. What are the potential causes of the Throttle Position Sensor 1 Circuit High Input code P0223 in a 2009 Nissan Rogue?

Common causes of code P0223 in a 2009 Nissan Rogue include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or issues with the engine control module (ECM).

4. How can I diagnose the OBDII code P0223 in my 2009 Nissan Rogue?

To diagnose code P0223 in a 2009 Nissan Rogue, you can use an OBDII scanner to retrieve the code and then inspect the throttle position sensor, wiring, and connectors for any visible damage or issues.

5. Can I continue driving my 2009 Nissan Rogue with OBDII code P0223?

It is not recommended to continue driving your 2009 Nissan Rogue with code P0223, as it can lead to further damage to the engine and other components. It is best to address the issue promptly.

6. How can I repair the Throttle Position Sensor 1 Circuit High Input code P0223 in my 2009 Nissan Rogue?

Repairing code P0223 in a 2009 Nissan Rogue may involve replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, or reprogramming the engine control module (ECM).

7. Is it possible to reset the OBDII code P0223 in a 2009 Nissan Rogue without fixing the underlying issue?

Resetting the OBDII code P0223 without addressing the underlying issue will only temporarily turn off the Check Engine Light. The code will likely reappear until the root cause is fixed.

8. How much does it cost to repair the Throttle Position Sensor 1 Circuit High Input code P0223 in a 2009 Nissan Rogue?

The cost of repairing code P0223 in a 2009 Nissan Rogue can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

9. Can a DIY enthusiast fix the OBDII code P0223 in a 2009 Nissan Rogue?

A DIY enthusiast with the necessary tools and knowledge may be able to fix code P0223 in a 2009 Nissan Rogue by replacing the throttle position sensor or repairing damaged wiring, but professional assistance is recommended for accurate diagnosis.

10. How long does it take to repair the Throttle Position Sensor 1 Circuit High Input code P0223 in a 2009 Nissan Rogue?

The time required to repair code P0223 in a 2009 Nissan Rogue can vary based on the exact cause of the issue and the repair process involved. Typically, it may take a few hours to a full day for diagnosis and repair.

Discuss the causes and fixes for P0223 2009 Nissan Rogue OBDII Code

Submit a New Comment

Code P0223 2009 Nissan Rogue comments

No comments found for this page.