Engine-Codes.com
Engine-Codes – KIA – P0222 KIA

P0222 KIA Code - TPS/Pedal Position Sensor/Switch 'B' Circuit Low Input

Quick Answer

The P0222 diagnostic trouble code (DTC) for KIA vehicles refers to an issue with the Throttle Position Sensor (TPS) or Pedal Position Sensor/Switch 'B' circuit having a low input signal. Common causes include Faulty TPS: The TPS itself may be malfunctioning, sending incorrect signals to the ECM, Damaged wiring or connectors: Corrosion, wear, or damage to the wiring or connectors in the sensor circuit can disrupt the signal, Malfunctioning ECM: A problem with the ECM's ability to interpret the TPS signal correctly can trigger the P0222 code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0222 KIA indicates TPS/Pedal Position Sensor/Switch 'B' Circuit Low Input.
Common causes
Common causes include Faulty TPS: The TPS itself may be malfunctioning, sending incorrect signals to the ECM, Damaged wiring or connectors: Corrosion, wear, or damage to the wiring or connectors in the sensor circuit can disrupt the signal, Malfunctioning ECM: A problem with the ECM's ability to interpret the TPS signal correctly can trigger the P0222 code.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 08, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0222 KIA Description

The P0222 diagnostic trouble code (DTC) for KIA vehicles refers to an issue with the Throttle Position Sensor (TPS) or Pedal Position Sensor/Switch 'B' circuit having a low input signal. The TPS is a crucial component in the vehicle's engine management system, as it helps regulate the amount of air entering the engine, which in turn affects fuel delivery and overall engine performance. The TPS works in conjunction with the vehicle's Electronic Control Module (ECM) to ensure the engine operates efficiently.

OBDII Code P0222 KIA - TPS/Pedal Position Sensor/Switch 'B' Circuit Low Input
P0222 KIA Code - TPS/Pedal Position Sensor/Switch 'B' Circuit Low Input

Common Causes of P0222 KIA

  1. Faulty TPS: The TPS itself may be malfunctioning, sending incorrect signals to the ECM.
  2. Damaged wiring or connectors: Corrosion, wear, or damage to the wiring or connectors in the sensor circuit can disrupt the signal.
  3. Malfunctioning ECM: A problem with the ECM's ability to interpret the TPS signal correctly can trigger the P0222 code.
  4. Mechanical issue with the throttle body: A sticking throttle body or other mechanical problem can affect the TPS signal and cause the issue.

Symptoms of P0222 KIA

  1. Erratic idling: The engine may idle roughly or inconsistently, indicating a problem with the TPS signal.
  2. Stalling: The vehicle may stall unexpectedly, especially when coming to a stop or during acceleration.
  3. Hesitation during acceleration: There may be a delay or hesitation in the vehicle's response when accelerating, affecting overall performance.
  4. Poor fuel efficiency: The vehicle may consume more fuel than usual due to incorrect air-fuel mixture ratios caused by the TPS issue.
  5. Engine misfires: The engine may misfire or run poorly, leading to a noticeable decrease in performance and potential damage to the engine.

How to Fix P0222 KIA

  1. Diagnose the issue: Use a diagnostic scan tool to retrieve the trouble code and perform a thorough inspection of the TPS, wiring, and connectors.
  2. Replace the TPS: If the TPS is found to be faulty, replace it with a new, OEM-quality sensor to ensure proper functionality.
  3. Check wiring and connectors: Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as necessary.
  4. Reset ECM: Clear the trouble code from the ECM's memory and reset the system to ensure the new TPS signal is properly recognized.
  5. Test drive and verify repair: Take the vehicle for a test drive to confirm that the issue has been resolved and the TPS is functioning correctly.

Cost to Fix P0222 KIA

The typical repair costs for addressing a P0222 code in a KIA vehicle can vary depending on the specific cause of the issue and the price of parts and labor. In general, replacing a faulty TPS can cost between $100 and $200, while addressing wiring or connector issues may add to the total cost. The total repair bill, including parts and labor, may range from $200 to $500 or more, depending on the extent of the problem and the required repairs.

When is the Code Detected?

An excessively low voltage from the Throttle Position Sensor (TPS) is sent to Engine Control Module (ECM).

Need more information about the P0222 KIA code?

Need more information on how to fix the P0222 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 KIA code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 KIA Code

1. What are the common symptoms of OBDII code P0222 in a KIA related to the TPS/Pedal Position Sensor/Switch 'B' Circuit Low Input?

- Common symptoms include poor acceleration, stalling, rough idling, and possible issues with shifting gears.

2. What are the potential causes of OBDII code P0222 in a KIA?

- The code P0222 can be triggered by a faulty TPS (Throttle Position Sensor), damaged wiring or connectors, or issues with the pedal position sensor/switch.

3. How can I diagnose the TPS/Pedal Position Sensor/Switch 'B' Circuit Low Input issue in my KIA?

- Use an OBDII scanner to retrieve the trouble code, visually inspect the wiring and connectors for any damage, and perform a voltage test on the TPS to determine its functionality.

4. Is it safe to continue driving my KIA with OBDII code P0222 active?

- It is not recommended to drive the vehicle with code P0222 active, as it can lead to poor performance, potential stalling, and other safety concerns.

5. What are some repair tips for addressing OBDII code P0222 in a KIA?

- Start by checking and cleaning the throttle body, inspecting the TPS and pedal position sensor/switch for any issues, and repairing or replacing any damaged wiring or connectors.

6. Can a DIY enthusiast fix OBDII code P0222 in a KIA?

- While some aspects of diagnosing and repairing the issue can be done by a DIY enthusiast, it is recommended to seek professional help for a thorough diagnosis and proper repair to ensure safety and efficiency.

7. How much does it typically cost to repair OBDII code P0222 in a KIA?

- The cost of repair can vary depending on the exact cause of the issue, but it may involve anywhere from $100 to $300 for parts and labor, excluding diagnostic fees.

8. Will resetting the OBDII code P0222 in my KIA make the issue go away?

- Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing OBDII code P0222 related to the TPS/Pedal Position Sensor/Switch 'B' Circuit Low Input.

Discuss the causes and fixes for P0222 KIA OBDII Code

Submit a New Comment

Code P0222 KIA comments

No comments found for this page.