Engine-CodesHonda – P0222 2018 Honda CR-V

P0222 2018 Honda CR-V Code - Throttle Position Sensor 'B' Circuit Low Voltage

Quick Answer

The P0222 diagnostic trouble code (DTC) for the 2018 Honda CR-V specifically indicates an issue with the Throttle Position Sensor 'B' Circuit registering low voltage. Common causes include Faulty throttle position sensor, Wiring or connector issues in the TPS circuit, ECM software or hardware malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0222 2018 Honda CR-V indicates Throttle Position Sensor 'B' Circuit Low Voltage.
Common causes
Common causes include Faulty throttle position sensor, Wiring or connector issues in the TPS circuit, ECM software or hardware malfunction.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0222 2018 Honda CR-V Description

The P0222 diagnostic trouble code (DTC) for the 2018 Honda CR-V specifically indicates an issue with the Throttle Position Sensor 'B' Circuit registering low voltage. The throttle position sensor (TPS) is a crucial component of the vehicle's electronic control system, as it monitors the position of the throttle valve and sends this information to the engine control module (ECM). This data is used to calculate the appropriate air-fuel mixture for optimal engine performance and efficiency.

OBDII Code P0222 2018 Honda CR-V - Throttle Position Sensor 'B' Circuit Low Voltage
P0222 2018 Honda CR-V Code - Throttle Position Sensor 'B' Circuit Low Voltage

Common Causes of P0222 2018 Honda CR-V

  1. Faulty throttle position sensor
  2. Wiring or connector issues in the TPS circuit
  3. ECM software or hardware malfunction
  4. Throttle body malfunction or contamination
  5. Electrical issues such as a short circuit or corrosion

Symptoms of P0222 2018 Honda CR-V

  1. Rough idling or stalling
  2. Reduced engine power
  3. Poor acceleration or throttle response
  4. Check Engine Light illuminated
  5. Difficulty shifting gears (in automatic transmissions)

How to Fix P0222 2018 Honda CR-V

  1. Begin by conducting a thorough inspection of the TPS wiring and connectors to check for any visible damage or corrosion. Repair or replace any damaged components.
  2. Test the TPS using a multimeter to ensure it is functioning within the manufacturer's specified parameters. Replace the TPS if it is found to be faulty.
  3. Check the throttle body for any contamination or mechanical issues that may be affecting TPS readings. Clean or replace the throttle body as necessary.
  4. Clear the DTC using a scan tool and perform a test drive to verify that the issue has been resolved. Monitor the TPS readings to ensure they are within the expected range.

Cost to Fix P0222 2018 Honda CR-V

The typical repair costs for addressing a Throttle Position Sensor 'B' Circuit Low Voltage issue on a 2018 Honda CR-V can vary depending on the specific cause of the problem. In general, the cost of a new throttle position sensor ranges from $50 to $150, while labor costs can range from $100 to $200. Overall, the total repair cost for this issue could range from $150 to $350. It is important to note that these estimates are approximate and actual costs may vary based on factors such as location, labor rates, and any additional repairs or parts needed. It is recommended to consult with a qualified mechanic or repair shop for a more accurate cost estimate.

Need more information about the P0222 2018 Honda CR-V code?

Need more information on how to fix the P0222 2018 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 2018 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 2018 Honda CR-V Code

What does OBDII code P0222 mean for a 2018 Honda CR-V?

P0222 indicates that the Throttle Position Sensor (TPS) "B" circuit is experiencing a low voltage condition, signaling a potential issue with the sensor or its circuit.

What are the symptoms of code P0222 in a 2018 Honda CR-V?

Common symptoms include reduced engine performance, poor acceleration, a stuck throttle, stalling, or the vehicle going into limp mode.

What causes the P0222 code to appear in a 2018 Honda CR-V?

Possible causes include a faulty Throttle Position Sensor (TPS), damaged or corroded wiring, a bad connector, or issues with the Engine Control Module (ECM).

Can I drive my 2018 Honda CR-V with the P0222 code?

It’s not recommended to drive the vehicle as it may enter limp mode or experience unexpected stalling, which could be unsafe.

How do you fix the P0222 code on a 2018 Honda CR-V?

Repairs may include replacing the TPS, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.

How is the P0222 code diagnosed?

A mechanic will use a scan tool to analyze live data, inspect the TPS and its wiring, and measure voltage at the sensor to identify the issue.

What tools are needed to repair a P0222 code?

Basic tools include a multimeter for testing voltage, a scan tool for diagnostics, and potentially replacement parts like the TPS or wiring components.

How much does it cost to fix the P0222 code on a 2018 Honda CR-V?

Repair costs can range from $100 to $500 or more, depending on whether the issue is with the TPS, wiring, or ECM.

Can a dirty throttle body cause the P0222 code on a 2018 Honda CR-V?

While uncommon, a dirty throttle body might contribute to sensor issues or improper readings, so cleaning it could help as part of troubleshooting.

Does the P0222 code require reprogramming the ECM?

Reprogramming the ECM is only necessary if it’s determined to be malfunctioning or if a new ECM is installed.

Discuss the causes and fixes for P0222 2018 Honda CR-V OBDII Code

Code P0222 2018 Honda CR-V comments

No comments found for this page.