Engine-Codes.com
Engine-Codes – Nissan – P0222 2011 Nissan Rogue

P0222 2011 Nissan Rogue Code - Throttle Position Sensor 1 Circuit Low Input

Quick Answer

The P0222 diagnostic trouble code (DTC) for a 2011 Nissan Rogue indicates an issue with the Throttle Position Sensor 1 Circuit, specifically a low input signal. Common causes include Worn or damaged throttle position sensor, Corroded or loose electrical connections to the TPS, Faulty wiring harness or connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0222 2011 Nissan Rogue indicates Throttle Position Sensor 1 Circuit Low Input.
Common causes
Common causes include Worn or damaged throttle position sensor, Corroded or loose electrical connections to the TPS, Faulty wiring harness or connectors.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0222 2011 Nissan Rogue Description

The P0222 diagnostic trouble code (DTC) for a 2011 Nissan Rogue indicates an issue with the Throttle Position Sensor 1 Circuit, specifically a low input signal. The throttle position sensor (TPS) is a crucial component of the vehicle's electronic fuel injection system, as it monitors the position of the throttle valve and sends this information to the engine control module (ECM). The ECM uses this data to determine the appropriate air-fuel mixture for optimal engine performance and efficiency.

OBDII Code P0222 2011 Nissan Rogue - Throttle Position Sensor 1 Circuit Low Input
P0222 2011 Nissan Rogue Code - Throttle Position Sensor 1 Circuit Low Input

Common Causes of P0222 2011 Nissan Rogue

  1. Worn or damaged throttle position sensor
  2. Corroded or loose electrical connections to the TPS
  3. Faulty wiring harness or connectors
  4. Issues with the ECM
  5. Environmental factors such as moisture or debris affecting the sensor

Symptoms of P0222 2011 Nissan Rogue

  1. Rough idling or stalling
  2. Poor acceleration or hesitation
  3. Engine misfires
  4. Reduced fuel efficiency
  5. Illumination of the Check Engine Light

How to Fix P0222 2011 Nissan Rogue

  1. Begin by conducting a thorough inspection of the throttle position sensor, wiring, and connectors for any visible damage or corrosion.
  2. Use a multimeter to test the voltage output of the TPS to determine if it is within the specified range.
  3. If the TPS is faulty, replace it with a new sensor following the manufacturer's guidelines.
  4. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.
  5. If the problem persists, further diagnostic testing may be required to identify any underlying issues with the ECM or wiring.

Cost to Fix P0222 2011 Nissan Rogue

The cost of repairing a Throttle Position Sensor 1 Circuit Low Input issue on a 2011 Nissan Rogue can vary depending on the specific cause of the problem and the cost of parts and labor in your area. On average, replacing a throttle position sensor can range from $100 to $200, with additional costs for diagnostic testing and labor. It's recommended to consult with a professional mechanic or auto repair shop to get an accurate estimate based on your vehicle's needs. Keep in mind that labor rates can vary between different repair shops and locations.

What does this mean?

Tech Notes for P0222 2011 Nissan Rogue

The throttle position sensor (TPS) is built into the throttle body.

When is the Code Detected?

An excessively low voltage from the Throttle Position Sensor (TPS) 2 is sent to Engine Control Module (ECM).

Need more information about the P0222 2011 Nissan Rogue code?

Need more information on how to fix the P0222 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 2011 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0222 in a 2011 Nissan Rogue related to the Throttle Position Sensor 1 Circuit Low Input?

- Common symptoms include poor acceleration, lack of power, rough idling, and the vehicle may go into limp mode.

2. What are the possible causes of OBDII code P0222 in a 2011 Nissan Rogue?

- The code P0222 typically indicates a problem with the throttle position sensor itself, a faulty wiring connection, or issues with the throttle body.

3. How can I diagnose the Throttle Position Sensor 1 Circuit Low Input issue in my 2011 Nissan Rogue?

- You can use an OBDII scanner to read the code, visually inspect the wiring and connections related to the throttle position sensor, and perform a voltage test on the sensor itself.

4. Can I continue driving my 2011 Nissan Rogue with the OBDII code P0222 present?

- It is not recommended to drive the vehicle with this code as it can lead to further damage and affect the performance of the vehicle.

5. What are the repair options for fixing OBDII code P0222 in a 2011 Nissan Rogue?

- Repair options include replacing the throttle position sensor, repairing any damaged wiring, and cleaning or replacing the throttle body if necessary.

6. How much does it typically cost to repair the Throttle Position Sensor 1 Circuit Low Input issue in a 2011 Nissan Rogue?

- The cost of repair can vary depending on the extent of the damage and whether you choose to do it yourself or take it to a professional mechanic. Costs can range from $100 to $300 or more.

7. Are there any preventative measures to avoid OBDII code P0222 in a 2011 Nissan Rogue?

- Regular maintenance, such as cleaning the throttle body and checking the wiring connections, can help prevent issues with the throttle position sensor.

8. Will resetting the OBDII code P0222 in my 2011 Nissan Rogue make it go away permanently?

- Resetting the code may temporarily remove the warning light, but if the underlying issue is not fixed, the code is likely to reappear.

9. Can a DIY enthusiast replace the throttle position sensor in a 2011 Nissan Rogue to address code P0222?

- Yes, replacing the throttle position sensor is a relatively straightforward task for those with some mechanical experience and the right tools.

10. Is it necessary to clear the OBDII code P0222 after fixing the issue in a 2011 Nissan Rogue?

- Yes, it is advisable to clear the code after fixing the problem to ensure the warning light does not reappear unnecessarily.

Discuss the causes and fixes for P0222 2011 Nissan Rogue OBDII Code

Submit a New Comment

Code P0222 2011 Nissan Rogue comments

No comments found for this page.