Engine-Codes.com
Engine-Codes – Nissan – P0222 2010 Nissan Rogue

P0222 2010 Nissan Rogue Code - Throttle Position Sensor 1 Circuit Low Input

Quick Answer

The P0222 diagnostic trouble code (DTC) in a 2010 Nissan Rogue indicates a problem with the Throttle Position Sensor 1 Circuit, specifically a low input signal. Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Corrosion or poor connections in the TPS circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0222 2010 Nissan Rogue indicates Throttle Position Sensor 1 Circuit Low Input.
Common causes
Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Corrosion or poor connections in the TPS circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0222 2010 Nissan Rogue Description

The P0222 diagnostic trouble code (DTC) in a 2010 Nissan Rogue indicates a problem with the Throttle Position Sensor 1 Circuit, specifically a low input signal. The throttle position sensor (TPS) is a crucial component that monitors the position of the throttle valve and sends this information to the engine control module (ECM). The ECM uses this data to determine the appropriate air-fuel mixture for optimal engine performance.

OBDII Code P0222 2010 Nissan Rogue - Throttle Position Sensor 1 Circuit Low Input
P0222 2010 Nissan Rogue Code - Throttle Position Sensor 1 Circuit Low Input

Common Causes of P0222 2010 Nissan Rogue

  1. Faulty throttle position sensor.
  2. Damaged wiring or connectors in the TPS circuit.
  3. Corrosion or poor connections in the TPS circuit.
  4. Issues with the engine control module (ECM).
  5. Environmental factors such as moisture or debris affecting the TPS.

Symptoms of P0222 2010 Nissan Rogue

  1. Poor acceleration or hesitation when pressing the gas pedal.
  2. Rough idling or stalling when coming to a stop.
  3. Reduced fuel efficiency.
  4. Check Engine Light illuminated on the dashboard.
  5. Vehicle may go into limp mode, limiting performance.

How to Fix P0222 2010 Nissan Rogue

  1. Begin by conducting a thorough inspection of the throttle position sensor and its wiring harness for any visible damage or corrosion.
  2. Test the TPS using a multimeter to check for proper voltage output at various throttle positions.
  3. If the TPS is faulty, replace it with a new sensor following manufacturer guidelines.
  4. Repair any damaged wiring or connectors in the TPS circuit.
  5. Clear the DTC codes and perform a test drive to ensure the issue has been resolved.

Cost to Fix P0222 2010 Nissan Rogue

The cost of repairing a Throttle Position Sensor 1 Circuit Low Input issue in a 2010 Nissan Rogue can vary depending on the specific cause of the problem and the cost of parts and labor in your area. On average, replacing a faulty TPS can cost between $100 and $200 for the part alone. Labor costs can range from $100 to $200, with total repair costs typically falling between $200 and $400. It is advisable to consult with a trusted mechanic or dealership to get an accurate estimate based on your vehicle's specific needs. Keep in mind that diagnostic time and labor rates can vary, so it's essential to inquire about these factors before proceeding with the repair.

What does this mean?

Tech Notes for P0222 2010 Nissan Rogue

The throttle position sensor (TPS) is built into the throttle body.

When is the Code Detected?

An excessively low voltage from the Throttle Position Sensor (TPS) 2 is sent to Engine Control Module (ECM).

Need more information about the P0222 2010 Nissan Rogue code?

Need more information on how to fix the P0222 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 2010 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0222 in a 2010 Nissan Rogue?

The common symptoms of code P0222 in a 2010 Nissan Rogue include poor acceleration, lack of power, and potentially unstable engine idling.

2. What does the OBDII code P0222 indicate in a 2010 Nissan Rogue?

Code P0222 in a 2010 Nissan Rogue indicates a low input signal from the Throttle Position Sensor 1 circuit.

3. What are the possible causes of OBDII code P0222 in a 2010 Nissan Rogue?

Possible causes of code P0222 in a 2010 Nissan Rogue include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or a problem in the engine control module.

4. How can I diagnose the Throttle Position Sensor 1 circuit low input issue in my 2010 Nissan Rogue?

To diagnose the Throttle Position Sensor 1 circuit low input issue in a 2010 Nissan Rogue, you can use a scan tool to check for OBDII codes, visually inspect the throttle position sensor and its wiring, and perform voltage tests on the sensor.

5. Can a dirty throttle body cause OBDII code P0222 in a 2010 Nissan Rogue?

Yes, a dirty throttle body can potentially cause code P0222 in a 2010 Nissan Rogue as it may affect the proper operation of the throttle position sensor.

6. Is it safe to continue driving a 2010 Nissan Rogue with OBDII code P0222?

It is not recommended to continue driving a 2010 Nissan Rogue with OBDII code P0222, as it can lead to poor engine performance and potential safety issues. It is advised to address the problem promptly.

7. How can I repair OBDII code P0222 in my 2010 Nissan Rogue?

To repair code P0222 in a 2010 Nissan Rogue, you may need to replace the throttle position sensor, repair any damaged wiring or connectors, or reprogram the engine control module if necessary.

8. Can I reset the OBDII code P0222 in a 2010 Nissan Rogue by disconnecting the battery?

While disconnecting the battery may clear the code temporarily, it is not a recommended long-term solution. It is best to address the underlying issue causing code P0222 in a 2010 Nissan Rogue for a permanent fix.

9. How much does it typically cost to repair OBDII code P0222 in a 2010 Nissan Rogue?

The cost to repair code P0222 in a 2010 Nissan Rogue can vary depending on the specific cause of the issue. It may range from a few hundred to around a thousand dollars, including parts and labor.

10. Can I prevent OBDII code P0222 from recurring in my 2010 Nissan Rogue?

To prevent OBDII code P0222 from recurring in a 2010 Nissan Rogue, it is advisable to perform regular maintenance, keep the throttle body clean, and address any issues with the throttle position sensor promptly.

Discuss the causes and fixes for P0222 2010 Nissan Rogue OBDII Code

Submit a New Comment

Code P0222 2010 Nissan Rogue comments

No comments found for this page.