Engine-Codes.com
Engine-Codes – Ford – P0222 2009 Ford Fusion

P0222 2009 Ford Fusion Code - Throttle Pedal Position Sensor Switch B Circuit Low

Quick Answer

The P0222 code for a 2009 Ford Fusion indicates a problem with the Throttle Pedal Position Sensor Switch B Circuit being lower than the expected voltage range. Common causes include Faulty throttle pedal position sensor, Wiring or connector issues in the sensor circuit, Corrosion or damage to sensor components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0222 2009 Ford Fusion indicates Throttle Pedal Position Sensor Switch B Circuit Low.
Common causes
Common causes include Faulty throttle pedal position sensor, Wiring or connector issues in the sensor circuit, Corrosion or damage to sensor components.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Aug 19, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0222 2009 Ford Fusion Description

The P0222 code for a 2009 Ford Fusion indicates a problem with the Throttle Pedal Position Sensor Switch B Circuit being lower than the expected voltage range. This sensor is responsible for monitoring the position of the throttle pedal and sending signals to the engine control module to adjust the throttle accordingly. When the voltage is too low, it can lead to improper throttle response, poor engine performance, and potentially even stalling of the vehicle. This issue can significantly impact the drivability of the vehicle and should be addressed promptly.

OBDII Code P0222 2009 Ford Fusion - Throttle Pedal Position Sensor Switch B Circuit Low
P0222 2009 Ford Fusion Code - Throttle Pedal Position Sensor Switch B Circuit Low

Common Causes of P0222 2009 Ford Fusion

  1. Faulty throttle pedal position sensor
  2. Wiring or connector issues in the sensor circuit
  3. Corrosion or damage to sensor components
  4. Issues with the engine control module
  5. Electrical problems within the vehicle's system

Symptoms of P0222 2009 Ford Fusion

  1. Unresponsive throttle pedal
  2. Engine hesitation or lack of power
  3. Illuminated check engine light
  4. Rough idling or stalling
  5. Reduced fuel efficiency

How to Fix P0222 2009 Ford Fusion

  1. Begin by diagnosing the specific cause of the issue using a diagnostic scanner to confirm the P0222 code.
  2. Inspect the throttle pedal position sensor and its wiring for any signs of damage, corrosion, or loose connections.
  3. If the sensor is found to be faulty, replace it with a new one following the manufacturer's guidelines.
  4. Clear the error code from the engine control module and test the vehicle to ensure the problem has been resolved.
  5. If the issue persists, further testing may be required to identify any underlying electrical issues or problems with the engine control module.

Cost to Fix P0222 2009 Ford Fusion

The cost of repairing a Throttle Pedal Position Sensor Switch B Circuit Low issue can vary depending on the specific cause of the problem and the labor rates in your area. Generally, replacing the throttle pedal position sensor can cost between $100 and $200, with additional costs for diagnostic testing and labor. Overall, you can expect to pay anywhere from $150 to $400 for this repair, but it's advisable to get a quote from a trusted auto repair shop for a more accurate estimate.

When is the Code Detected?

An excessively low voltage from the Throttle Position Sensor (TPS) is sent to Engine Control Module (ECM).

Need more information about the P0222 2009 Ford Fusion code?

Need more information on how to fix the P0222 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 2009 Ford Fusion Code

1. What are the common symptoms of OBDII code P0222 in a 2009 Ford Fusion?

The common symptoms of OBDII code P0222 in a 2009 Ford Fusion include reduced engine power, hesitation or stalling, and the vehicle going into "limp mode."

2. What does the OBDII code P0222 indicate in a 2009 Ford Fusion?

OBDII code P0222 in a 2009 Ford Fusion indicates an issue with the Throttle Pedal Position Sensor Switch B Circuit registering a low voltage.

3. What are the possible causes of OBDII code P0222 in a 2009 Ford Fusion?

Possible causes of OBDII code P0222 in a 2009 Ford Fusion include a faulty throttle pedal position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).

4. How can I diagnose the Throttle Pedal Position Sensor Switch B Circuit Low issue in my 2009 Ford Fusion?

You can diagnose the Throttle Pedal Position Sensor Switch B Circuit Low issue in your 2009 Ford Fusion by using an OBDII scanner to read the trouble code, inspecting the throttle pedal position sensor and its wiring, and testing the sensor's voltage output.

5. Can I drive my 2009 Ford Fusion with OBDII code P0222?

It is not recommended to drive your 2009 Ford Fusion with OBDII code P0222 as it can lead to unsafe driving conditions due to reduced engine power and potential stalling.

6. How can I repair OBDII code P0222 in my 2009 Ford Fusion?

To repair OBDII code P0222 in your 2009 Ford Fusion, you may need to replace the throttle pedal position sensor, repair any damaged wiring or connectors, or reprogram the engine control module (ECM) if necessary.

7. Will resetting the OBDII code P0222 in my 2009 Ford Fusion make the issue go away?

Resetting the OBDII code P0222 in your 2009 Ford Fusion may temporarily clear the code, but if the underlying issue with the Throttle Pedal Position Sensor Switch B Circuit Low is not addressed, the code is likely to reappear.

8. Is it safe to continue driving if the OBDII code P0222 light is flashing in my 2009 Ford Fusion?

If the OBDII code P0222 light is flashing in your 2009 Ford Fusion, it indicates a severe issue that requires immediate attention. It is not safe to continue driving, and you should have the vehicle inspected as soon as possible.

9. Can a DIY enthusiast fix OBDII code P0222 in a 2009 Ford Fusion?

A DIY enthusiast with the necessary tools and knowledge about automotive repairs may be able to fix OBDII code P0222 in a 2009 Ford Fusion, especially if it involves replacing the throttle pedal position sensor or repairing wiring issues.

10. How much does it cost to repair OBDII code P0222 in a 2009 Ford Fusion at a mechanic?

The cost to repair OBDII code P0222 in a 2009 Ford Fusion at a mechanic can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

Discuss the causes and fixes for P0222 2009 Ford Fusion OBDII Code

Submit a New Comment

Code P0222 2009 Ford Fusion comments

No comments found for this page.