Engine-Codes.com
Engine-Codes – Nissan – P0222 2008 Nissan Rogue

P0222 2008 Nissan Rogue Code - Throttle Position Sensor 1 Circuit Low Input

Quick Answer

The P0222 code for a 2008 Nissan Rogue specifically indicates a problem with the Throttle Position Sensor (TPS) 1 Circuit having a low input. Common causes include Faulty throttle position sensor, Wiring issues or loose connections in the TPS circuit, Corrosion or dirt affecting the TPS sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0222 2008 Nissan Rogue indicates Throttle Position Sensor 1 Circuit Low Input.
Common causes
Common causes include Faulty throttle position sensor, Wiring issues or loose connections in the TPS circuit, Corrosion or dirt affecting the TPS sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0222 2008 Nissan Rogue Description

The P0222 code for a 2008 Nissan Rogue specifically indicates a problem with the Throttle Position Sensor (TPS) 1 Circuit having a low input. The TPS is a crucial component of the throttle system in a vehicle, as it monitors the position of the throttle pedal and sends signals to the engine control unit (ECU) to adjust the amount of air and fuel entering the engine accordingly. In this case, a low input means that the voltage signal being sent by the TPS is lower than the expected range, which can lead to various performance issues.

OBDII Code P0222 2008 Nissan Rogue - Throttle Position Sensor 1 Circuit Low Input
P0222 2008 Nissan Rogue Code - Throttle Position Sensor 1 Circuit Low Input

Common Causes of P0222 2008 Nissan Rogue

  1. Faulty throttle position sensor
  2. Wiring issues or loose connections in the TPS circuit
  3. Corrosion or dirt affecting the TPS sensor
  4. ECU malfunction affecting TPS signal
  5. Mechanical issues with the throttle mechanism

Symptoms of P0222 2008 Nissan Rogue

  1. Poor acceleration and lack of power
  2. Hesitation or stalling when accelerating
  3. Rough idling or fluctuating idle speed
  4. Difficulty shifting gears smoothly
  5. Decreased fuel efficiency

How to Fix P0222 2008 Nissan Rogue

  1. Begin by diagnosing the TPS circuit using a multimeter to check for the voltage signal. Ensure the TPS is functioning within the specified range.
  2. Inspect the wiring and connections related to the TPS for any damage, corrosion, or loose connections. Repair or replace as needed.
  3. Clean the TPS sensor and throttle body to remove any dirt or debris that may be affecting its performance.
  4. If the TPS itself is faulty, replace it with a new sensor and recalibrate it according to manufacturer's specifications.
  5. Clear the diagnostic trouble codes from the ECU and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0222 2008 Nissan Rogue

The cost of repairing a Throttle Position Sensor 1 Circuit Low Input issue in a 2008 Nissan Rogue can vary depending on the specific cause of the problem and the cost of parts and labor in your area. On average, the cost for parts such as a new TPS sensor can range from $50 to $150. Labor costs may range from $100 to $300, depending on the shop's hourly rate and the time required for diagnosis and repair. Overall, the total repair cost for this issue could range from $150 to $450. However, it's essential to obtain a detailed quote from a trusted auto repair shop to get an accurate estimate for your specific situation.

What does this mean?

Tech Notes for P0222 2008 Nissan Rogue

The throttle position sensor (TPS) is built into the throttle body.

When is the Code Detected?

An excessively low voltage from the Throttle Position Sensor (TPS) 2 is sent to Engine Control Module (ECM).

Need more information about the P0222 2008 Nissan Rogue code?

Need more information on how to fix the P0222 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 2008 Nissan Rogue Code

1. What are common symptoms of OBDII code P0222 in a 2008 Nissan Rogue?

- Common symptoms include reduced engine power, hesitation during acceleration, and an illuminated check engine light.

2. What does the OBDII code P0222 indicate in a 2008 Nissan Rogue?

- OBDII code P0222 indicates a low input signal from Throttle Position Sensor 1 circuit in the vehicle's throttle control system.

3. What are possible causes of the Throttle Position Sensor 1 Circuit Low Input error code in a 2008 Nissan Rogue?

- Possible causes include a faulty throttle position sensor, damaged wiring or connectors, or issues with the engine control module (ECM).

4. How can I diagnose the cause of OBDII code P0222 in my 2008 Nissan Rogue?

- To diagnose the issue, you can use a scan tool to read the code and check the throttle position sensor's voltage output, inspect the wiring for damage, and test the sensor's resistance.

5. Is it safe to drive my 2008 Nissan Rogue with the P0222 error code present?

- It is not recommended to drive the vehicle with the P0222 code active, as it can lead to poor engine performance and potential safety hazards.

6. Can I reset the OBDII code P0222 in my 2008 Nissan Rogue myself?

- While you can clear the code using an OBDII scanner, it is crucial to address the underlying issue causing the code to prevent it from returning.

7. How much does it typically cost to repair the Throttle Position Sensor 1 Circuit Low Input issue in a 2008 Nissan Rogue?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

8. Are there any DIY repair tips for fixing the P0222 code in a 2008 Nissan Rogue?

- DIY enthusiasts can attempt to replace the throttle position sensor themselves, following a repair manual or online tutorials for guidance.

9. Will replacing the throttle position sensor fix the P0222 code in my 2008 Nissan Rogue?

- In many cases, replacing the faulty throttle position sensor can resolve the P0222 error code, but it is essential to confirm the diagnosis before proceeding with the repair.

10. How long does it typically take to repair the Throttle Position Sensor 1 Circuit Low Input issue in a 2008 Nissan Rogue?

- The repair process usually takes around 1-2 hours, but this can vary based on the extent of the issue and the experience of the mechanic.

Discuss the causes and fixes for P0222 2008 Nissan Rogue OBDII Code

Submit a New Comment

Code P0222 2008 Nissan Rogue comments

No comments found for this page.