P0174 Subaru Code - System Too Lean Bank 2
Quick Answer
The P0174 code for Subaru vehicles indicates that there is a lean condition present in Bank 2 of the engine. Common causes include Vacuum leak, Faulty oxygen sensor, Clogged fuel filter. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0174 Subaru indicates System Too Lean Bank 2.
- Common causes
- Common causes include Vacuum leak, Faulty oxygen sensor, Clogged fuel filter.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0174 Subaru Description
The P0174 code for Subaru vehicles indicates that there is a lean condition present in Bank 2 of the engine. This means that there is an imbalance in the air-fuel mixture, with there being too much air or too little fuel in the mixture. This can lead to a variety of issues with the vehicle's performance, fuel efficiency, and emissions.
Common Causes of P0174 Subaru
- Vacuum leak
- Faulty oxygen sensor
- Clogged fuel filter
- Malfunctioning mass airflow sensor
- Issues with fuel injectors
Symptoms of P0174 Subaru
- Rough idle
- Hesitation during acceleration
- Decreased fuel efficiency
- Check Engine Light illuminated
- Engine misfires
How to Fix P0174 Subaru
- Diagnose the specific cause of the lean condition by checking for vacuum leaks, testing the oxygen sensor, inspecting the fuel filter, and checking the mass airflow sensor and fuel injectors.
- Repair or replace any faulty components identified during the diagnosis process.
- Clear the diagnostic trouble codes from the vehicle's computer.
- Test drive the vehicle to ensure that the issue has been resolved and that the air-fuel mixture is now within the proper range.
- If necessary, perform a relearn procedure to reset the engine's adaptive memory.
Cost to Fix P0174 Subaru
The cost of repairing a P0174 code on a Subaru can vary depending on the specific cause of the lean condition and the parts and labor required for the repair. In general, the cost of parts for this repair can range from $100 to $500, with labor costs typically adding another $100 to $300. This brings the total estimated cost to repair a P0174 code on a Subaru to around $200 to $800. However, it is important to keep in mind that labor rates at auto repair shops can vary, so it is advisable to check local rates for a more accurate estimate.
Tech Notes for P0174 Subaru
When is the Code Detected?
- The amount of mixture ratio compensation is too small. (The mixture ratio is too lean.)
Need more information about the P0174 Subaru code?
Need more information on how to fix the P0174 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0174 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0174 Subaru Code
1. What does OBDII code P0174 on a Subaru indicate?
This code, System Too Lean Bank 2, indicates that the engine is receiving a lean air-fuel mixture on the bank 2 side of the engine.
2. What are common symptoms of OBDII code P0174 in a Subaru?
Common symptoms include rough idling, poor acceleration, hesitation or stalling when driving, and potential increase in fuel consumption.
3. What are the possible causes of OBDII code P0174 in a Subaru?
Common causes include a vacuum leak, faulty oxygen sensor, dirty or clogged fuel injectors, a malfunctioning mass airflow sensor, or a problem with the fuel pump.
4. How can I diagnose the issue behind OBDII code P0174 on my Subaru?
Diagnosis typically involves checking for vacuum leaks, inspecting the oxygen sensor, testing the mass airflow sensor, checking fuel pressure, and examining the fuel injectors.
5. How can I repair OBDII code P0174 on my Subaru?
Possible repairs include fixing any vacuum leaks, replacing the oxygen sensor, cleaning or replacing fuel injectors, cleaning the mass airflow sensor, or addressing any issues with the fuel pump.
6. Can a dirty air filter cause OBDII code P0174 on a Subaru?
Yes, a dirty air filter can restrict airflow to the engine, causing a lean air-fuel mixture and triggering the P0174 code.
7. Is it safe to continue driving my Subaru with OBDII code P0174 active?
It is not recommended to drive your Subaru with the P0174 code active, as it can lead to poor engine performance and potential damage over time.
8. Will resetting the OBDII code P0174 on my Subaru make it go away permanently?
Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing the lean condition is not addressed, the code is likely to return.
9. How much does it typically cost to repair OBDII code P0174 on a Subaru?
The cost of repairs can vary depending on the specific cause of the issue, but it is advisable to consult a professional mechanic for an accurate diagnosis and cost estimate.
10. Can a Subaru owner with some mechanical knowledge fix OBDII code P0174 themselves?
Depending on the cause of the issue, some Subaru owners may be able to address the P0174 code themselves, especially if it involves simple tasks like checking for vacuum leaks or replacing an oxygen sensor.
Discuss the causes and fixes for P0174 Subaru OBDII Code
Code P0174 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.