Engine-Codes - Toyota - P0174 2010 Toyota Camry

P0174 2010 Toyota Camry Code - Air/Fuel Mixture System Too Lean Bank 2

- Code Popularity: 3,260 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents

|What are the Possible Causes of the Code P0174 2010 Toyota Camry?

  • Intake air leaks
  • Faulty front heated oxygen sensor
  • Ignition misfiring
  • Faulty fuel injectors
  • Exhaust gas leaks
  • Incorrect fuel pressure
  • Lack of fuel
  • Faulty Mass Air Flow (MAF) sensor
  • Incorrect Positive Crankcase Ventilation (PCV) hose connection

|How to Fix the P0174 2010 Toyota Camry Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Code P0174 2010 Toyota Camry Tech Notes

If the P0171 is combined with the P0174 code, it's very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the air flow meter. If the problem persists the front oxygen (O2) sensor may need to be replaced.

|What is the Cost to Diagnose the Code P0174 2010 Toyota Camry?

Labor: 1.0

The cost to diagnose the P0174 2010 Toyota Camry code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your car have Safety Recalls? → Check here

|When is the P0174 2010 Toyota Camry Code Detected?

- Fuel injection system does not operate properly.
- The amount of mixture ratio compensation is too small. (The mixture ratio is too lean.)

|What are Code P0174 2010 Toyota Camry Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Excessive Fuel Consumption

|What Does the P0174 2010 Toyota Camry Code Mean?

The fuel trim is related to the feedback compensation value, not to the basic injection time. The fuel trim consists of both the short-term and the long-term fuel trims. The short-term fuel trim is fuel compensation that is used to constantly maintain the air-fuel ratio at stoichiometric levels. The signal from the Air-Fuel Ratio (A/F) sensor indicates whether the air-fuel ratio is rich or lean compared to the stoichiometric ratio. This triggers a reduction in the fuel injection volume if the air-fuel ratio is rich and an increase in the fuel injection volume if it is lean.Factors such as individual engine differences, wear over time and changes in operating environment cause short-term fuel trim to vary from the central value. The long-term fuel trim, which controls overall fuel compensation, compensates for long-term deviations in the fuel trim from the central value caused by the short-term fuel trim compensation. If both the short-term and long-term fuel trims are lean or rich beyond predetermined values, it is interpreted as a malfunction, and the ECM illuminates the MIL and sets a DTC.

Air/Fuel Mixture System Too Lean Bank 2

|Need more Information on the P0174 2010 Toyota Camry Code?

Need more information on how to fix the P0174 2010 Toyota Camry code? Get Access to Factory Service Manuals

|Need Help with the P0174 2010 Toyota Camry Code?

Get the P0174 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area