Engine-Codes.com
Engine-Codes – Nissan – P0174 2010 Nissan Altima Sedan

P0174 2010 Nissan Altima Sedan Code - Fuel Injection System Too Lean Bank 2

Quick Answer

When the diagnostic trouble code P0174 appears on a 2010 Nissan Altima Sedan, it indicates that the fuel injection system on bank 2 is running too lean. Common causes include Faulty oxygen sensor, Clogged fuel injector, Vacuum leak in the intake system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0174 2010 Nissan Altima Sedan indicates Fuel Injection System Too Lean Bank 2.
Common causes
Common causes include Faulty oxygen sensor, Clogged fuel injector, Vacuum leak in the intake system.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0174 2010 Nissan Altima Sedan Description

When the diagnostic trouble code P0174 appears on a 2010 Nissan Altima Sedan, it indicates that the fuel injection system on bank 2 is running too lean. This means that there is an imbalance in the air-fuel mixture being delivered to the engine, with too much air and not enough fuel. This can lead to a variety of performance issues within the vehicle, including reduced power, rough idling, poor acceleration, and potentially even stalling.

OBDII Code P0174 2010 Nissan Altima Sedan - Fuel Injection System Too Lean Bank 2
P0174 2010 Nissan Altima Sedan Code - Fuel Injection System Too Lean Bank 2

Common Causes of P0174 2010 Nissan Altima Sedan

  1. Faulty oxygen sensor
  2. Clogged fuel injector
  3. Vacuum leak in the intake system
  4. Low fuel pressure
  5. Faulty fuel pressure regulator

Symptoms of P0174 2010 Nissan Altima Sedan

  1. Reduced power and acceleration
  2. Rough idling or engine misfires
  3. Engine stalling or hesitation
  4. Increased fuel consumption
  5. Check engine light illuminated

How to Fix P0174 2010 Nissan Altima Sedan

  1. Diagnose the issue using a scan tool to pinpoint the exact cause of the lean condition on bank 2.
  2. Inspect the oxygen sensor on bank 2 for proper functioning and replace if necessary.
  3. Check the fuel injectors on bank 2 for any blockages or malfunctions and clean or replace as needed.
  4. Inspect the intake system for vacuum leaks and repair any damaged hoses or gaskets.
  5. Test the fuel pressure on bank 2 and replace the fuel pressure regulator if it is not functioning correctly.

Cost to Fix P0174 2010 Nissan Altima Sedan

The typical repair costs for addressing a fuel injection system too lean on bank 2 in a 2010 Nissan Altima Sedan can range from $200 to $800, depending on the specific cause of the issue and the parts that need to be replaced. This estimate includes the cost of parts and labor. It is essential to note that the actual repair costs may vary based on factors such as the location of the repair shop, the make and model of the vehicle, and the labor rates charged by the technician. It is recommended to obtain quotes from multiple auto repair shops to ensure a competitive price.

What does this mean?

Tech Notes for P0174 2010 Nissan Altima Sedan

If the P0171 is combined with the P0174 code, it's very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the air flow meter. If the problem persists the front oxygen (O2) sensor may need to be replaced.



When is the Code Detected?

- Fuel injection system does not operate properly.
- The amount of mixture ratio compensation is too small. (The mixture ratio is too lean.)

Need more information about the P0174 2010 Nissan Altima Sedan code?

Need more information on how to fix the P0174 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0174 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0174 2010 Nissan Altima Sedan Code

1. What are common symptoms of OBDII code P0174 in a 2010 Nissan Altima Sedan?

- Common symptoms include rough idling, loss of power, poor fuel efficiency, and potentially a check engine light.

2. What does the OBDII code P0174 "Fuel Injection System Too Lean Bank 2" mean for a 2010 Nissan Altima Sedan?

- This code indicates that the engine is receiving too much air and not enough fuel on the second bank of cylinders.

3. What are some possible causes of OBDII code P0174 in a 2010 Nissan Altima Sedan?

- Causes can include a vacuum leak, faulty oxygen sensor, clogged fuel filter, malfunctioning fuel injectors, or a dirty mass airflow sensor.

4. How can I diagnose the OBDII code P0174 in my 2010 Nissan Altima Sedan?

- You can diagnose this code by checking for vacuum leaks, inspecting the oxygen sensor, testing the fuel pressure, and cleaning or replacing the mass airflow sensor.

5. Are there any quick fixes or temporary solutions for OBDII code P0174 in a 2010 Nissan Altima Sedan?

- While there may be temporary improvements from using fuel system cleaners or resetting the code, it's essential to address the root cause for a lasting repair.

6. Is it safe to continue driving my 2010 Nissan Altima Sedan with OBDII code P0174?

- It's not recommended to drive for an extended period with this code as it can lead to engine damage and further issues if left unresolved.

7. How much does it typically cost to repair OBDII code P0174 in a 2010 Nissan Altima Sedan?

- The cost of repair can vary depending on the exact cause, but it may range from a simple fix like tightening a hose clamp to more involved repairs like replacing sensors or filters.

8. Can I reset the OBDII code P0174 in my 2010 Nissan Altima Sedan by disconnecting the battery?

- While disconnecting the battery may clear the code temporarily, it's crucial to address the underlying issue to prevent the code from reappearing.

9. Will OBDII code P0174 cause my 2010 Nissan Altima Sedan to fail an emissions test?

- Yes, this code can cause your vehicle to fail an emissions test due to the increase in harmful emissions associated with a lean fuel mixture.

10. How can I prevent OBDII code P0174 from recurring in my 2010 Nissan Altima Sedan?

- Regular maintenance, such as checking for vacuum leaks, replacing air filters, and using quality fuel, can help prevent this code from recurring.

Discuss the causes and fixes for P0174 2010 Nissan Altima Sedan OBDII Code

Submit a New Comment

Code P0174 2010 Nissan Altima Sedan comments

No comments found for this page.