Engine-Codes.com
Engine-Codes – Jeep – P0159 Jeep

P0159 Jeep Code - O2 Sensor 2/2 Slow Response

Quick Answer

The P0159 Jeep code indicates that the O2 sensor 2/2 (downstream sensor 2) in the exhaust system is experiencing a slow response. Common causes include Faulty O2 sensor 2/2, Wiring issues or connections related to the O2 sensor, Exhaust leaks near the O2 sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0159 Jeep indicates O2 Sensor 2/2 Slow Response.
Common causes
Common causes include Faulty O2 sensor 2/2, Wiring issues or connections related to the O2 sensor, Exhaust leaks near the O2 sensor.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0159 Jeep Description

The P0159 Jeep code indicates that the O2 sensor 2/2 (downstream sensor 2) in the exhaust system is experiencing a slow response. The O2 sensor is responsible for monitoring the oxygen levels in the exhaust gases and sending this information to the vehicle's engine control module (ECM) to adjust the air-fuel mixture for optimal performance and emissions.

OBDII Code P0159 Jeep - O2 Sensor 2/2 Slow Response
P0159 Jeep Code - O2 Sensor 2/2 Slow Response

Common Causes of P0159 Jeep

  1. Faulty O2 sensor 2/2
  2. Wiring issues or connections related to the O2 sensor
  3. Exhaust leaks near the O2 sensor
  4. Engine running rich or lean
  5. Issues with the ECM or engine control system

Symptoms of P0159 Jeep

  1. Decreased fuel efficiency
  2. Engine misfires or hesitation
  3. Check Engine Light illuminated
  4. Poor acceleration or rough idling

How to Fix P0159 Jeep

  1. Diagnose the issue by using a scan tool to read the code and verify the slow response of the O2 sensor 2/2.
  2. Inspect the wiring and connections related to the O2 sensor for any damage or corrosion. Repair or replace as needed.
  3. Check for exhaust leaks near the O2 sensor and repair them if found.
  4. Replace the O2 sensor 2/2 if it is determined to be faulty.
  5. Clear the code from the ECM and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0159 Jeep

The cost of repairing a P0159 Jeep code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. Typically, the cost of replacing an O2 sensor 2/2 can range from $150 to $300 for the part alone. Labor costs can add an additional $100 to $200, bringing the total repair cost to around $250 to $500.

What does this mean?

Tech Notes for P0159 Jeep

Replacing the O2 Sensor 2 usually takes care of the problem

When is the Code Detected?

The P0159 code is set when the Engine Control Module (ECM) detects that the rear O2 sensor takes more time to respond between rich and lean than the specified time.

Need more information about the P0159 Jeep code?

Need more information on how to fix the P0159 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0159 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0159 Jeep Code

No Frequently Asked Questions about P0159 Jeep Code found.

Discuss the causes and fixes for P0159 Jeep OBDII Code

Submit a New Comment

Code P0159 Jeep comments

No comments found for this page.