P0159 2006 FORD FUSION - O2 Sensor Circuit Slow Response Bank 2 Sensor 2
P0159 2006 FORD FUSION Possible Causes
- Faulty Rear Heated Oxygen Sensor Bank 2
- Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
First diagnose P0159 2006 FORD FUSION code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
P0159 2006 FORD FUSION Tech NotesReplacing the O2 Sensor 2 usually takes care of the problem
Cost of diagnosing the P0159 2006 FORD FUSION code
Labor: 1.0The cost of diagnosing the P0159 2006 FORD FUSION code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the P0159 2006 FORD FUSION code detected?The P0159 code is set when the Engine Control Module (ECM) detects that the rear O2 sensor takes more time to respond between rich and lean than the specified time.
P0159 2006 FORD FUSION Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust
P0159 2006 FORD FUSION MeaningThe heated oxygen sensor (HO2S) monitor tracks the rate of voltage change during the rise and fall of the HO2S signal. When the rate of voltage change is less than a calibrated value, the powertrain control module (PCM) begins to modify the fuel trim attempting to increase the HO2S voltage switch rate. The DTC sets when the PCM is at the allowable limit or has exceeded an allowable length of time for fuel trim modification, without detecting an acceptable rate of voltage change.
P0159 2006 FORD FUSION More InformationNeed more information on how to fix the P0159 2006 FORD FUSION code?
Get Access to Factory Service Manuals