P0158 2016 GMC Sierra Code - HO2S Circuit High Voltage Bank 2 Sensor 2
Quick Answer
The P0158 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates an issue with the HO2S (Heated Oxygen Sensor) Circuit High Voltage for Bank 2 Sensor 2. Common causes include Faulty HO2S for Bank 2 Sensor 2, Wiring or connector issues, Vacuum leak. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0158 2016 GMC Sierra indicates HO2S Circuit High Voltage Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty HO2S for Bank 2 Sensor 2, Wiring or connector issues, Vacuum leak.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0158 2016 GMC Sierra Description
The P0158 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates an issue with the HO2S (Heated Oxygen Sensor) Circuit High Voltage for Bank 2 Sensor 2. This sensor is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. Bank 2 refers to the side of the engine that does not contain cylinder #1, while Sensor 2 indicates that it is the downstream sensor located after the catalytic converter.
Common Causes of P0158 2016 GMC Sierra
- Faulty HO2S for Bank 2 Sensor 2
- Wiring or connector issues
- Vacuum leak
- Rich fuel mixture
- Malfunctioning ECM
Symptoms of P0158 2016 GMC Sierra
- Decreased fuel efficiency
- Check Engine Light illuminated
- Rough idling or stalling
- Poor acceleration
- Increased emissions
How to Fix P0158 2016 GMC Sierra
- Begin by locating the Bank 2 Sensor 2 HO2S, typically found after the catalytic converter.
- Inspect the wiring and connector for any damage or corrosion. Repair or replace as needed.
- Test the HO2S using a multimeter to check for proper voltage output. Replace if readings are out of specification.
- Clear the DTC with a scan tool and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, further diagnostics may be required to identify any underlying issues with the fuel system or ECM.
Cost to Fix P0158 2016 GMC Sierra
The typical repair costs for addressing a P0158 code on a 2016 GMC Sierra can range from $150 to $400, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's advisable to check local rates for a more precise estimate.
Tech Notes for P0158 2016 GMC Sierra
User Submitted Video
Need more information about the P0158 2016 GMC Sierra code?
Need more information on how to fix the P0158 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0158 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0158 2016 GMC Sierra Code
What does OBDII code P0158 mean on a 2016 GMC Sierra?
P0158 indicates that the oxygen sensor (Bank 2, Sensor 2) is detecting a higher-than-expected voltage, which may indicate a problem with the sensor or related systems.
What are the symptoms of code P0158 on a 2016 GMC Sierra?
Common symptoms include decreased fuel efficiency, rough engine performance, check engine light illumination, and higher emissions.
What causes P0158 on a 2016 GMC Sierra?
Possible causes include a faulty oxygen sensor (Bank 2, Sensor 2), damaged wiring or connectors, exhaust system leaks, or issues with the engine control module (ECM).
How is P0158 diagnosed on a 2016 GMC Sierra?
Technicians typically use an OBDII scanner to confirm the code, inspect the wiring and connectors for damage, and test the oxygen sensor's performance using a multimeter or diagnostic tools.
Can I drive my 2016 GMC Sierra with code P0158?
While the vehicle may still be drivable, driving with this code can lead to poor fuel economy, increased emissions, and potential damage to the catalytic converter if left unresolved.
How do you fix code P0158 on a 2016 GMC Sierra?
Repairs may include replacing the faulty oxygen sensor, repairing damaged wiring or connectors, addressing exhaust leaks, or updating the ECM software if needed.
Is replacing the oxygen sensor the only solution for P0158?
Not always. While a faulty sensor is a common cause, you should inspect wiring, connectors, and exhaust systems to rule out other issues before replacement.
What is the location of Bank 2 Sensor 2 on a 2016 GMC Sierra?
Bank 2 refers to the side of the engine opposite the #1 cylinder, and Sensor 2 is the downstream oxygen sensor located after the catalytic converter.
How much does it cost to fix code P0158 on a 2016 GMC Sierra?
Repair costs can range from $150 to $400, depending on whether the oxygen sensor, wiring, or other components need replacement.
Can a dirty or clogged catalytic converter cause code P0158?
Yes, a restricted catalytic converter can lead to abnormal exhaust flow and high voltage readings from the downstream oxygen sensor.
Discuss the causes and fixes for P0158 2016 GMC Sierra OBDII Code
Code P0158 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.