Engine-CodesChevrolet – P0158 2014 Chevrolet Silverado

P0158 2014 Chevrolet Silverado Code - HO2S Circuit High Voltage Bank 2 Sensor 2

Quick Answer

The P0158 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado refers to an issue with the HO2S (Heated Oxygen Sensor) Circuit High Voltage on Bank 2 Sensor 2. Common causes include Faulty oxygen sensor, Damaged or corroded wiring/connectors, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0158 2014 Chevrolet Silverado indicates HO2S Circuit High Voltage Bank 2 Sensor 2.
Common causes
Common causes include Faulty oxygen sensor, Damaged or corroded wiring/connectors, Exhaust leaks near the sensor.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0158 2014 Chevrolet Silverado Description

The P0158 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado refers to an issue with the HO2S (Heated Oxygen Sensor) Circuit High Voltage on Bank 2 Sensor 2. The oxygen sensor is a crucial component of the vehicle's emissions control system, responsible for monitoring the amount of oxygen in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. In this case, Bank 2 Sensor 2 specifically refers to the oxygen sensor located on the side of the engine that does not contain cylinder 1, and the second sensor downstream of the catalytic converter.

OBDII Code P0158 2014 Chevrolet Silverado - HO2S Circuit High Voltage Bank 2 Sensor 2
P0158 2014 Chevrolet Silverado Code - HO2S Circuit High Voltage Bank 2 Sensor 2

Common Causes of P0158 2014 Chevrolet Silverado

  1. Faulty oxygen sensor
  2. Damaged or corroded wiring/connectors
  3. Exhaust leaks near the sensor
  4. Issues with the ECM
  5. Contaminated or poor-quality fuel

Symptoms of P0158 2014 Chevrolet Silverado

  1. Decreased fuel efficiency
  2. Check engine light illuminated on the dashboard
  3. Rough idling or stalling
  4. Increased emissions
  5. Difficulty starting the engine

How to Fix P0158 2014 Chevrolet Silverado

  1. Begin by conducting a visual inspection of the oxygen sensor and its wiring to check for any obvious signs of damage or corrosion.
  2. Use a multimeter to test the voltage output of the oxygen sensor to determine if it is within the specified range.
  3. If the sensor is faulty, replace it with a new one, ensuring it is the correct part for Bank 2 Sensor 2.
  4. Check and repair any damaged wiring or connectors leading to the sensor.
  5. Clear the DTC from the ECM using an OBD-II scanner and perform a test drive to ensure the issue has been resolved.

Cost to Fix P0158 2014 Chevrolet Silverado

The cost of repairing a P0158 DTC on a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue. Replacement oxygen sensors typically range from $50 to $200, with additional costs for labor if the sensor needs to be professionally installed. Overall, the total repair cost, including parts and labor, could range from $150 to $400. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to obtain quotes from multiple sources to ensure a competitive price.

Tech Notes for P0158 2014 Chevrolet Silverado

Replacing the Rear Heated Oxygen Sensor (HO2S) Bank 2 usually takes care of the problem.











User Submitted Video

Need more information about the P0158 2014 Chevrolet Silverado code?

Need more information on how to fix the P0158 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0158 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0158 2014 Chevrolet Silverado Code

What does the OBDII code P0158 mean for a 2014 Chevrolet Silverado?

P0158 indicates that the high voltage signal from the Bank 2 Sensor 2 oxygen sensor (downstream sensor) is exceeding the expected range, often due to a fault in the sensor or related components.

What are the common symptoms of code P0158 in a 2014 Chevrolet Silverado?

Symptoms may include poor fuel economy, rough idling, engine misfires, illuminated check engine light, and increased emissions.

What causes P0158 on a 2014 Chevrolet Silverado?

Typical causes include a faulty oxygen sensor, damaged wiring or connectors, exhaust leaks, or a failed catalytic converter.

Can I drive my 2014 Chevrolet Silverado with code P0158?

While the vehicle may still be drivable, prolonged driving with this code can increase emissions and potentially damage other components like the catalytic converter.

How do you diagnose P0158 on a 2014 Chevrolet Silverado?

Diagnose by using an OBDII scanner, inspecting the Bank 2 Sensor 2 oxygen sensor, checking for damaged wiring, and testing the sensor's voltage output.

How do you fix code P0158 on a 2014 Chevrolet Silverado?

Repairs may involve replacing the Bank 2 Sensor 2 oxygen sensor, repairing damaged wiring or connectors, or addressing exhaust leaks.

What tools are needed to repair P0158 on a 2014 Chevrolet Silverado?

You may need an OBDII scanner, a multimeter, basic hand tools, and potentially an oxygen sensor socket for replacement.

What is Bank 2 Sensor 2 in a 2014 Chevrolet Silverado?

Bank 2 refers to the side of the engine opposite the #1 cylinder, and Sensor 2 is the downstream oxygen sensor located after the catalytic converter.

How do you check if the oxygen sensor is faulty for code P0158?

Use a multimeter to measure the sensor's voltage output and verify if it falls within the expected range (typically 0.1 to 0.9 volts).

What happens if code P0158 is ignored on a 2014 Chevrolet Silverado?

Ignoring P0158 can lead to poor fuel efficiency, increased emissions, and potential damage to the catalytic converter, which can be costly to repair.

Discuss the causes and fixes for P0158 2014 Chevrolet Silverado OBDII Code

Code P0158 2014 Chevrolet Silverado comments

No comments found for this page.