P0155 Jeep Code - O2 Sensor 2/1 Heater Performance
Quick Answer
The P0155 code for Jeep vehicles specifically refers to an issue with the O2 Sensor 2/1 Heater Performance. Common causes include Faulty oxygen sensor heater, Corrosion or contamination on the sensor, Malfunctioning ECM. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0155 Jeep indicates O2 Sensor 2/1 Heater Performance.
- Common causes
- Common causes include Faulty oxygen sensor heater, Corrosion or contamination on the sensor, Malfunctioning ECM.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0155 Jeep Description
The P0155 code for Jeep vehicles specifically refers to an issue with the O2 Sensor 2/1 Heater Performance. This means that the oxygen sensor located in the upstream position on bank 2, which is the side of the engine with cylinder #1, is not working properly. The oxygen sensor is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. The heater performance aspect of the code indicates that the heating element within the oxygen sensor is not functioning as it should.
Common Causes of P0155 Jeep
- Faulty oxygen sensor heater
- Corrosion or contamination on the sensor
- Malfunctioning ECM
- Blown fuse related to the oxygen sensor
- Exhaust system leaks or blockages
Symptoms of P0155 Jeep
- Decreased fuel efficiency
- Rough engine idle
- Poor acceleration
- Increased emissions
- Engine misfires
How to Fix P0155 Jeep
- Begin by diagnosing the issue with a scan tool to confirm the P0155 code and pinpoint the specific oxygen sensor causing the problem.
- Inspect the wiring and connector for any damage or corrosion. Repair or replace as necessary.
- Test the oxygen sensor heater using a multimeter to check for continuity and proper resistance. Replace the sensor if the heater is faulty.
- Clear the fault codes from the ECM and drive the vehicle to ensure the code does not return.
- If the code persists, further diagnostics may be needed to identify any underlying issues with the ECM or exhaust system.
Cost to Fix P0155 Jeep
The cost of repairing the P0155 code for O2 Sensor 2/1 Heater Performance can vary depending on the specific cause of the issue and the labor rates in your area. Generally, replacing the oxygen sensor heater can range from $150 to $300 for parts, with additional labor costs of around $100 to $200. Keep in mind that diagnostic time and labor rates at auto repair shops can fluctuate, so it's recommended to obtain quotes from local shops for a more accurate estimate.
Tech Notes for P0155 Jeep
When is the Code Detected?
Need more information about the P0155 Jeep code?
Need more information on how to fix the P0155 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0155 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0155 Jeep Code
No Frequently Asked Questions about P0155 Jeep Code found.
Discuss the causes and fixes for P0155 Jeep OBDII Code
Code P0155 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.