Engine-CodesChevrolet – P0155 2014 Chevrolet Silverado

P0155 2014 Chevrolet Silverado Code - HO2S Heater Performance Bank 2 Sensor 1

Quick Answer

The P0155 diagnostic trouble code (DTC) on a 2014 Chevrolet Silverado indicates an issue with the Heated Oxygen Sensor (HO2S) Heater Performance on Bank 2 Sensor 1. Common causes include Faulty HO2S Heater Element: The heater element in the oxygen sensor may fail over time, causing the P0155 code to be triggered, Damaged Wiring or Connectors: Issues with the wiring or connectors in the sensor circuit can prevent the heater from receiving power, leading to a malfunction, Blown Fuse: A blown fuse in the heater circuit can disrupt the power supply to the HO2S heater, resulting in performance issues. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0155 2014 Chevrolet Silverado indicates HO2S Heater Performance Bank 2 Sensor 1.
Common causes
Common causes include Faulty HO2S Heater Element: The heater element in the oxygen sensor may fail over time, causing the P0155 code to be triggered, Damaged Wiring or Connectors: Issues with the wiring or connectors in the sensor circuit can prevent the heater from receiving power, leading to a malfunction, Blown Fuse: A blown fuse in the heater circuit can disrupt the power supply to the HO2S heater, resulting in performance issues.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 07, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0155 2014 Chevrolet Silverado Description

The P0155 diagnostic trouble code (DTC) on a 2014 Chevrolet Silverado indicates an issue with the Heated Oxygen Sensor (HO2S) Heater Performance on Bank 2 Sensor 1. This sensor is responsible for monitoring the oxygen levels in the exhaust gases and sending this information to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. The heater element in the sensor helps it reach operating temperature quickly, allowing it to function efficiently.

OBDII Code P0155 2014 Chevrolet Silverado - HO2S Heater Performance Bank 2 Sensor 1
P0155 2014 Chevrolet Silverado Code - HO2S Heater Performance Bank 2 Sensor 1

Common Causes of P0155 2014 Chevrolet Silverado

  1. Faulty HO2S Heater Element: The heater element in the oxygen sensor may fail over time, causing the P0155 code to be triggered.
  2. Damaged Wiring or Connectors: Issues with the wiring or connectors in the sensor circuit can prevent the heater from receiving power, leading to a malfunction.
  3. Blown Fuse: A blown fuse in the heater circuit can disrupt the power supply to the HO2S heater, resulting in performance issues.
  4. Malfunctioning ECM: A faulty engine control module may not send the correct signals to the HO2S heater, causing it to malfunction.

Symptoms of P0155 2014 Chevrolet Silverado

  1. Check Engine Light: The most common symptom associated with the P0155 code is the illumination of the Check Engine Light on the vehicle's dashboard.
  2. Decreased Fuel Efficiency: A malfunctioning HO2S heater can lead to inaccurate readings, causing the engine to run rich or lean, resulting in decreased fuel efficiency.
  3. Rough Idling: An improperly functioning oxygen sensor can cause the engine to idle roughly or inconsistently.
  4. Poor Performance: The vehicle may experience a loss of power, hesitation, or stalling due to incorrect air-fuel mixture adjustments.
  5. Failed Emissions Test: If the issue is not resolved, it can lead to increased emissions, potentially causing the vehicle to fail an emissions test.

How to Fix P0155 2014 Chevrolet Silverado

  1. Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the oxygen sensor's heater circuit to identify the root cause of the problem.
  2. Replace the HO2S: If the heater element is faulty, replace the oxygen sensor with a new, OEM-quality unit to restore proper functionality.
  3. Check Wiring and Connectors: Inspect the wiring and connectors in the sensor circuit for any damage or corrosion, repairing or replacing any components as needed.
  4. Test the Fuse: Verify that the fuse in the heater circuit is intact and functioning correctly. Replace any blown fuses with the appropriate rating.
  5. Clear DTCs: After completing the repair, clear the DTC from the ECM memory using a scan tool and monitor the sensor's operation to ensure the issue has been resolved.

Cost to Fix P0155 2014 Chevrolet Silverado

The typical cost to repair a P0155 code on a 2014 Chevrolet Silverado can range from $150 to $400, including parts and labor. The cost of the oxygen sensor itself can vary depending on the quality and brand, with OEM sensors generally being more expensive. Labor rates at auto repair shops can vary, but on average, you can expect to pay between $80 and $150 per hour for diagnosis and repair. It is advisable to check with local repair shops for a more accurate estimate based on your specific location and vehicle.

Tech Notes for P0155 2014 Chevrolet Silverado

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

Need more information about the P0155 2014 Chevrolet Silverado code?

Need more information on how to fix the P0155 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0155 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0155 2014 Chevrolet Silverado Code

1. What is OBDII code P0155 for a 2014 Chevrolet Silverado?

The code P0155 on a 2014 Chevrolet Silverado indicates an issue with the HO2S (Heated Oxygen Sensor) heater performance for Bank 2 Sensor 1.

2. What are the common symptoms of OBDII code P0155 on a 2014 Chevrolet Silverado?

Common symptoms of P0155 may include poor fuel efficiency, rough idling, engine misfires, and the illumination of the check engine light.

3. What can cause OBDII code P0155 on a 2014 Chevrolet Silverado?

Possible causes of code P0155 include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or a problem with the vehicle's computer system.

4. How can I diagnose OBDII code P0155 on my 2014 Chevrolet Silverado?

Diagnosing P0155 typically involves checking the oxygen sensor's wiring and connectors, testing the sensor's heater circuit, and inspecting related fuses and components for any issues.

5. How can I repair OBDII code P0155 on a 2014 Chevrolet Silverado?

Repairing P0155 often involves replacing the Bank 2 Sensor 1 oxygen sensor, repairing any damaged wiring or connectors, and ensuring the heater circuit is functioning properly.

6. Can I drive my 2014 Chevrolet Silverado with OBDII code P0155?

It is not recommended to drive your Silverado with code P0155 as it can lead to decreased fuel efficiency and potential engine performance issues.

7. How much does it cost to fix OBDII code P0155 on a 2014 Chevrolet Silverado?

The cost of fixing P0155 can vary depending on the exact cause of the issue, but it may range from $150 to $400 including parts and labor.

8. How urgent is it to address OBDII code P0155 on a 2014 Chevrolet Silverado?

While the vehicle may still be operational with code P0155, it is important to address the issue promptly to prevent potential damage to the engine and to ensure optimal fuel efficiency.

9. Can a DIY enthusiast fix OBDII code P0155 on a 2014 Chevrolet Silverado?

Depending on your skill level and access to tools, you may be able to address P0155 yourself by replacing the oxygen sensor and checking wiring connections. However, professional diagnosis and repair are recommended for complex issues.

10. Will resetting the check engine light resolve OBDII code P0155 on a 2014 Chevrolet Silverado?

Simply resetting the check engine light will not fix the underlying issue causing P0155. It is essential to diagnose and repair the problem to prevent the code from reoccurring.

Discuss the causes and fixes for P0155 2014 Chevrolet Silverado OBDII Code

Code P0155 2014 Chevrolet Silverado comments

No comments found for this page.