Engine-Codes.com
Engine-Codes – Ford – P0155 2012 Ford Fusion

P0155 2012 Ford Fusion Code - O2 Heater Circuit Bank 2 Sensor 1

Quick Answer

The P0155 code for a 2012 Ford Fusion indicates a problem with the O2 (oxygen) sensor heater circuit in bank 2 sensor 1. Common causes include Faulty O2 Sensor: The O2 sensor itself may be faulty and require replacement, Wiring Issues: Damaged or corroded wiring in the O2 sensor heater circuit can prevent proper operation, Blown Fuse: A blown fuse in the O2 sensor heater circuit can disrupt the heating element. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0155 2012 Ford Fusion indicates O2 Heater Circuit Bank 2 Sensor 1.
Common causes
Common causes include Faulty O2 Sensor: The O2 sensor itself may be faulty and require replacement, Wiring Issues: Damaged or corroded wiring in the O2 sensor heater circuit can prevent proper operation, Blown Fuse: A blown fuse in the O2 sensor heater circuit can disrupt the heating element.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0155 2012 Ford Fusion Description

The P0155 code for a 2012 Ford Fusion indicates a problem with the O2 (oxygen) sensor heater circuit in bank 2 sensor 1. The O2 sensor is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. The heater circuit in the O2 sensor is designed to bring the sensor up to operating temperature quickly for accurate readings.

OBDII Code P0155 2012 Ford Fusion - O2 Heater Circuit Bank 2 Sensor 1
P0155 2012 Ford Fusion Code - O2 Heater Circuit Bank 2 Sensor 1

Common Causes of P0155 2012 Ford Fusion

  1. Faulty O2 Sensor: The O2 sensor itself may be faulty and require replacement.
  2. Wiring Issues: Damaged or corroded wiring in the O2 sensor heater circuit can prevent proper operation.
  3. Blown Fuse: A blown fuse in the O2 sensor heater circuit can disrupt the heating element.
  4. ECM Malfunction: A malfunction in the engine control module can also trigger the P0155 code.
  5. Exhaust Leak: An exhaust leak near the O2 sensor can affect its ability to function properly.

Symptoms of P0155 2012 Ford Fusion

  1. Check Engine Light: The most common symptom associated with the P0155 code is the illumination of the check engine light on the dashboard.
  2. Decreased Fuel Efficiency: A malfunctioning O2 sensor heater circuit can lead to inaccurate readings, resulting in decreased fuel efficiency.
  3. Rough Idle: The engine may experience rough idling or hesitation during acceleration due to incorrect air-fuel mixture.
  4. Failed Emissions Test: If the O2 sensor is not functioning properly, the vehicle may fail an emissions test due to increased emissions.
  5. Engine Misfires: In severe cases, the engine may experience misfires or stalling due to incorrect fuel delivery.

How to Fix P0155 2012 Ford Fusion

  1. Diagnose the Issue: Use a scan tool to retrieve the P0155 code and perform a thorough inspection of the O2 sensor heater circuit.
  2. Test O2 Sensor: Test the O2 sensor to determine if it is functioning correctly or needs to be replaced.
  3. Check Wiring: Inspect the wiring in the O2 sensor heater circuit for any damage or corrosion and repair as needed.
  4. Replace Fuse: If a blown fuse is the culprit, replace it with a new one of the same amperage.
  5. Address ECM Issues: If the ECM is suspected to be the cause, consult a professional for further diagnosis and repair.

Cost to Fix P0155 2012 Ford Fusion

The typical repair costs for addressing a P0155 code in a 2012 Ford Fusion can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. This estimate includes the cost of a new O2 sensor, wiring repairs, fuse replacement, and diagnostic fees. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location and vehicle specifics.

What does this mean?

Tech Notes for P0155 2012 Ford Fusion

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The Engine Control Module (ECM) monitors how long it take the sensor to warm up and start sending an adequate signal. The code means the the sensor is taking too long to warm up. Replacing the Front Heated Oxygen Sensor (H2OS) Bank 2 usually takes care of the problem.

When is the Code Detected?

The current amperage in the front heated oxygen sensor heater circuit is out of the normal range. (An improper voltage drop signal is sent to ECM through the front heated oxygen sensor heater)

Need more information about the P0155 2012 Ford Fusion code?

Need more information on how to fix the P0155 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0155 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0155 2012 Ford Fusion Code

1. What does OBDII code P0155 for a 2012 Ford Fusion mean?

Code P0155 indicates an issue with the O2 sensor heater circuit for Bank 2 Sensor 1 in the exhaust system.

2. What are the common symptoms of OBDII code P0155 on a 2012 Ford Fusion?

Common symptoms include poor fuel economy, rough idling, engine misfires, and the illumination of the Check Engine Light.

3. What are the possible causes of OBDII code P0155 on a 2012 Ford Fusion?

Possible causes include a faulty O2 sensor, damaged wiring or connectors in the O2 sensor circuit, a blown fuse, or a problem with the ECM.

4. How do I diagnose the O2 heater circuit issue for Bank 2 Sensor 1 on a 2012 Ford Fusion?

To diagnose the problem, you can use a multimeter to test the O2 sensor heater circuit resistance, check for proper voltage supply, and inspect the wiring and connectors for any damage.

5. Can I continue driving my 2012 Ford Fusion with OBDII code P0155?

It is not recommended to drive with a P0155 code as it can lead to poor engine performance and potential damage to the catalytic converter over time.

6. How can I repair OBDII code P0155 on my 2012 Ford Fusion?

Repair options include replacing the Bank 2 Sensor 1 O2 sensor, repairing any damaged wiring or connectors, checking and replacing fuses if needed, and resetting the fault code with a diagnostic tool.

7. Is it possible to clear the OBDII code P0155 on a 2012 Ford Fusion without fixing the underlying issue?

Clearing the code without fixing the problem will only temporarily turn off the Check Engine Light. The issue will persist and may lead to more significant problems if not addressed.

8. How much does it typically cost to fix OBDII code P0155 on a 2012 Ford Fusion?

The cost of fixing a P0155 code can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor.

9. Are there any preventive maintenance steps to avoid O2 heater circuit issues on a 2012 Ford Fusion?

Regularly servicing your vehicle, using high-quality fuel, and avoiding rough driving can help prevent issues with the O2 sensor heater circuit.

10. Can a DIY enthusiast with basic automotive knowledge fix OBDII code P0155 on a 2012 Ford Fusion?

While some may be able to address simple issues like replacing the O2 sensor, diagnosing and repairing complex electrical problems may require professional help or specialized tools.

Discuss the causes and fixes for P0155 2012 Ford Fusion OBDII Code

Submit a New Comment

Code P0155 2012 Ford Fusion comments

No comments found for this page.