P0153 Chrysler Code - O2 sensor 2/1 Slow Response
Quick Answer
The P0153 Chrysler code indicates that the oxygen sensor 2/1 in bank 2 is not responding quickly enough to changes in the air-fuel ratio. Common causes include Faulty oxygen sensor, Wiring or connector issues, Exhaust leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0153 Chrysler indicates O2 sensor 2/1 Slow Response.
- Common causes
- Common causes include Faulty oxygen sensor, Wiring or connector issues, Exhaust leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0153 Chrysler Description
The P0153 Chrysler code indicates that the oxygen sensor 2/1 in bank 2 is not responding quickly enough to changes in the air-fuel ratio. This sensor plays a crucial role in monitoring the oxygen levels in the exhaust gases, providing feedback to the engine control module (ECM) to adjust the fuel mixture for optimal combustion. A slow response from this sensor can lead to inefficient fuel consumption, reduced engine performance, and increased emissions. If left unresolved, it can potentially cause damage to the catalytic converter and other engine components.
Common Causes of P0153 Chrysler
- Faulty oxygen sensor
- Wiring or connector issues
- Exhaust leaks
- Vacuum leaks
- Engine running too rich or too lean
Symptoms of P0153 Chrysler
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Check Engine Light (CEL) illuminated
- Failed emissions test
How to Fix P0153 Chrysler
- Use an OBD-II scanner to confirm the P0153 code and identify the specific oxygen sensor causing the issue.
- Inspect the sensor, wiring, and connectors for any signs of damage or corrosion, repairing or replacing as necessary.
- Check for exhaust leaks and repair them if present.
- Perform a fuel system diagnosis to ensure the engine is running at the correct air-fuel ratio.
- Clear the code and drive the vehicle to monitor if the issue reoccurs.
Cost to Fix P0153 Chrysler
The cost of repairing a P0153 Chrysler code can vary depending on the root cause of the issue. On average, replacing an oxygen sensor can cost between $100 and $300 for the part, with additional labor costs ranging from $50 to $150 per hour. If other repairs or replacements are needed, such as fixing exhaust leaks or addressing wiring issues, the total cost could increase. It's recommended to consult with a trusted mechanic or repair shop for an accurate cost estimate based on the specific circumstances of your vehicle.
Tech Notes for P0153 Chrysler
There is a Factory Service Bulletin for the 2005-2006 Chrysler 300:
2005-2006 Chrysler 300 Factory Service Bulletin OBDII Code P0153
When is the Code Detected?
Need more information about the P0153 Chrysler code?
Need more information on how to fix the P0153 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0153 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0153 Chrysler Code
No Frequently Asked Questions about P0153 Chrysler Code found.
Discuss the causes and fixes for P0153 Chrysler OBDII Code
Code P0153 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.