P0152 2017 Chevrolet Silverado Code - HO2S Circuit High Voltage Bank 2 Sensor 1
Quick Answer
The P0152 diagnostic trouble code (DTC) for a 2017 Chevrolet Silverado indicates an issue with the HO2S (Heated Oxygen Sensor) Circuit High Voltage for Bank 2 Sensor 1. Common causes include Faulty HO2S sensor, Wiring or connector issues, Vacuum leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0152 2017 Chevrolet Silverado indicates HO2S Circuit High Voltage Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty HO2S sensor, Wiring or connector issues, Vacuum leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0152 2017 Chevrolet Silverado Description
The P0152 diagnostic trouble code (DTC) for a 2017 Chevrolet Silverado indicates an issue with the HO2S (Heated Oxygen Sensor) Circuit High Voltage for Bank 2 Sensor 1. The HO2S is a crucial component of the vehicle's emissions control system, responsible for monitoring the oxygen levels in the exhaust gases. Bank 2 Sensor 1 refers to the sensor located on the side of the engine with the second cylinder bank and upstream of the catalytic converter.
Common Causes of P0152 2017 Chevrolet Silverado
- Faulty HO2S sensor
- Wiring or connector issues
- Vacuum leaks
- Engine misfires
- Exhaust system leaks
Symptoms of P0152 2017 Chevrolet Silverado
- Decreased fuel efficiency
- Rough idling or stalling
- Check Engine Light illuminated
- Poor engine performance
- Increased emissions
How to Fix P0152 2017 Chevrolet Silverado
- Begin by conducting a visual inspection of the HO2S sensor, wiring, and connectors to check for any visible damage or corrosion.
- Use a multimeter to test the sensor's voltage output and resistance to determine if it is functioning correctly.
- If the sensor is faulty, replace it with a new OEM or aftermarket sensor, following manufacturer guidelines for installation.
- Inspect and repair any damaged wiring or connectors related to the HO2S circuit.
- Clear the DTC with a scan tool and perform a test drive to ensure the issue has been resolved.
Cost to Fix P0152 2017 Chevrolet Silverado
The typical repair costs for addressing a P0152 code on a 2017 Chevrolet Silverado can range from $150 to $400, including parts and labor. However, it is important to note that actual costs can vary depending on the specific diagnosis time, labor rates, and the need for additional repairs. Factors such as location, vehicle make and model, and engine type can also influence the final cost. It is advisable to consult with local auto repair shops to get a more accurate estimate based on your individual circumstances.
Tech Notes for P0152 2017 Chevrolet Silverado
Need more information about the P0152 2017 Chevrolet Silverado code?
Need more information on how to fix the P0152 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0152 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0152 2017 Chevrolet Silverado Code
No Frequently Asked Questions about P0152 2017 Chevrolet Silverado Code found.
Discuss the causes and fixes for P0152 2017 Chevrolet Silverado OBDII Code
Code P0152 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.