P0151 GMC Code - HO2S Circuit Low Voltage Bank 2 Sensor 1
Quick Answer
The P0151 diagnostic trouble code (DTC) for GMC vehicles refers to an issue with the HO2S (Heated Oxygen Sensor) circuit having low voltage on Bank 2 Sensor 1. Common causes include Faulty HO2S, Damaged wiring or connectors, Vacuum leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0151 GMC indicates HO2S Circuit Low Voltage Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty HO2S, Damaged wiring or connectors, Vacuum leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0151 GMC Description
The P0151 diagnostic trouble code (DTC) for GMC vehicles refers to an issue with the HO2S (Heated Oxygen Sensor) circuit having low voltage on Bank 2 Sensor 1. The HO2S is responsible for monitoring the oxygen level in the exhaust gases to ensure the proper air-fuel ratio for combustion. Bank 2 Sensor 1 specifically refers to the sensor located in the exhaust pipe coming from the bank of cylinders opposite the bank where the number one cylinder is located.
Common Causes of P0151 GMC
- Faulty HO2S
- Damaged wiring or connectors
- Vacuum leaks
- Exhaust system leaks
- PCM issues
Symptoms of P0151 GMC
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Check Engine Light illuminated
- Failed emissions test
How to Fix P0151 GMC
- Start by inspecting the wiring and connectors related to Bank 2 Sensor 1 for any visible damage. Repair or replace as necessary.
- Test the HO2S using a multimeter to check for proper voltage output. Replace the sensor if it is malfunctioning.
- Check for vacuum leaks or exhaust system leaks that could affect the sensor's readings. Repair leaks as needed.
- Clear the DTC using an OBD-II scanner and reset the PCM to see if the code returns. Monitor the sensor's performance to ensure it is functioning correctly.
Cost to Fix P0151 GMC
The cost of repairing a P0151 code can vary depending on the specific cause of the issue. Replacement HO2S sensors typically range from $50 to $200, while labor costs can range from $100 to $300. Overall, a repair for this issue could cost anywhere from $150 to $500, including parts and labor. It is recommended to consult with a professional mechanic to determine the exact cost for your vehicle. Keep in mind that diagnostic time and labor rates can vary, so it's advisable to get quotes from multiple sources before proceeding with the repair.
Tech Notes for P0151 GMC
Need more information about the P0151 GMC code?
Need more information on how to fix the P0151 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0151 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P0151 2014 GMC Sierra — HO2S Circuit Low Voltage Bank 2 Sensor 1
- P0151 2015 GMC Sierra — HO2S Circuit Low Voltage Bank 2 Sensor 1
- P0151 2016 GMC Sierra — HO2S Circuit Low Voltage Bank 2 Sensor 1
- P0151 2017 GMC Sierra — HO2S Circuit Low Voltage Bank 2 Sensor 1
- P0151 2018 GMC Sierra — HO2S Circuit Low Voltage Bank 2 Sensor 1
Frequently Asked Questions about P0151 GMC Code
No Frequently Asked Questions about P0151 GMC Code found.
Discuss the causes and fixes for P0151 GMC OBDII Code
Code P0151 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.