P0143 Mitsubishi Code - Heated Oxygen Sensor Heater Control Circuit Low Voltage Bank 1 Sensor 3
Quick Answer
The P0143 code for Mitsubishi vehicles refers to a fault in the Heated Oxygen Sensor (HO2S) Heater Control Circuit for Bank 1 Sensor 3. Common causes include Faulty Oxygen Sensor: The most common cause of the P0143 code is a malfunctioning oxygen sensor heater circuit, Wiring Issues: Damage or corrosion in the wiring connecting the oxygen sensor to the ECM can disrupt the heater circuit, ECM Malfunction: A fault in the engine control module can also trigger the P0143 code. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0143 Mitsubishi indicates Heated Oxygen Sensor Heater Control Circuit Low Voltage Bank 1 Sensor 3.
- Common causes
- Common causes include Faulty Oxygen Sensor: The most common cause of the P0143 code is a malfunctioning oxygen sensor heater circuit, Wiring Issues: Damage or corrosion in the wiring connecting the oxygen sensor to the ECM can disrupt the heater circuit, ECM Malfunction: A fault in the engine control module can also trigger the P0143 code.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0143 Mitsubishi Description
The P0143 code for Mitsubishi vehicles refers to a fault in the Heated Oxygen Sensor (HO2S) Heater Control Circuit for Bank 1 Sensor 3. The oxygen sensor is a crucial component in the engine management system, responsible for measuring the amount of oxygen in the exhaust gases to help the engine control module (ECM) adjust the air-fuel mixture for optimal combustion. The heater circuit in the oxygen sensor ensures that it reaches operating temperature quickly, allowing it to function efficiently.
Common Causes of P0143 Mitsubishi
- Faulty Oxygen Sensor: The most common cause of the P0143 code is a malfunctioning oxygen sensor heater circuit.
- Wiring Issues: Damage or corrosion in the wiring connecting the oxygen sensor to the ECM can disrupt the heater circuit.
- ECM Malfunction: A fault in the engine control module can also trigger the P0143 code.
- Blown Fuse: A blown fuse in the heater circuit can prevent the oxygen sensor from heating up properly.
Symptoms of P0143 Mitsubishi
- Check Engine Light: The most common symptom associated with the P0143 code is the illumination of the Check Engine Light on the dashboard.
- Poor Fuel Efficiency: The vehicle may experience a decrease in fuel efficiency due to the inaccurate air-fuel mixture caused by the faulty oxygen sensor heater circuit.
- Rough Idling: The engine may idle roughly or inconsistently, as the ECM struggles to adjust the fuel mixture without accurate oxygen sensor readings.
- Failed Emissions Test: If the oxygen sensor is not functioning correctly, the vehicle may fail emissions tests due to increased emissions.
How to Fix P0143 Mitsubishi
- Diagnose the Issue: Use a diagnostic scanner to retrieve the fault code and pinpoint the specific oxygen sensor causing the problem.
- Inspect Wiring: Check the wiring harness for any damage, corrosion, or loose connections. Repair or replace as needed.
- Test Oxygen Sensor: Test the functionality of the oxygen sensor using a multimeter to ensure it is receiving power and heating up properly.
- Replace Oxygen Sensor: If the oxygen sensor is faulty, replace it with a new sensor compatible with your Mitsubishi vehicle.
- Clear Codes: After completing the repair, clear the fault codes from the ECM memory to reset the Check Engine Light.
Cost to Fix P0143 Mitsubishi
The cost of repairing the P0143 code for a Mitsubishi vehicle can vary depending on the specific model and year of the vehicle. On average, the cost of replacing an oxygen sensor heater circuit can range from $200 to $500, including parts and labor. Keep in mind that prices may vary based on the location of the repair shop, the type of oxygen sensor required, and any additional repairs or diagnostic tests needed. It is recommended to consult with a certified mechanic or dealership for a more accurate estimate based on your vehicle's specific needs.
Need more information about the P0143 Mitsubishi code?
Need more information on how to fix the P0143 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0143 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0143 Mitsubishi Code
What does the OBDII code P0143 indicate on a Mitsubishi?
P0143 indicates a low voltage issue in the heater control circuit for the heated oxygen sensor located at Bank 1, Sensor 3.
What are the common symptoms of code P0143 in a Mitsubishi?
Symptoms may include poor fuel efficiency, rough engine performance, increased emissions, and an illuminated check engine light.
What causes the P0143 code to occur?
Common causes include a faulty oxygen sensor, damaged wiring, poor electrical connections, or a malfunctioning heater control circuit.
Can I drive my Mitsubishi with the P0143 code?
While the car may still be drivable, it’s not recommended due to potential engine performance issues and increased emissions.
How is the P0143 code diagnosed?
A mechanic will use a scan tool to confirm the code, inspect the oxygen sensor, check the wiring and connectors, and test the heater control circuit for proper function.
What is the role of Bank 1 Sensor 3 in a Mitsubishi?
Bank 1 Sensor 3 is typically located downstream in the exhaust system and helps monitor emissions and catalytic converter efficiency.
How can I fix the P0143 code on my Mitsubishi?
Repairs may involve replacing the faulty oxygen sensor, repairing damaged wiring, or addressing issues with the heater control circuit.
How much does it cost to fix the P0143 code in a Mitsubishi?
Repair costs vary, but replacing an oxygen sensor typically costs $150-$300, plus labor. Wiring repairs may cost less depending on complexity.
What tools are needed to address the P0143 code?
You’ll need a scan tool to confirm the code, a multimeter to test wiring and voltage, and basic hand tools to replace the sensor if necessary.
How can I prevent the P0143 code from reoccurring?
Regular maintenance, inspecting wiring for damage, and replacing oxygen sensors as needed can help prevent this code.
Discuss the causes and fixes for P0143 Mitsubishi OBDII Code
Code P0143 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.